Author Archives: admin


Gene therapy – Wikipedia

Medical field

Gene therapy is a medical field which focuses on the genetic modification of cells to produce a therapeutic effect[1] or the treatment of disease by repairing or reconstructing defective genetic material.[2] The first attempt at modifying human DNA was performed in 1980, by Martin Cline, but the first successful nuclear gene transfer in humans, approved by the National Institutes of Health, was performed in May 1989.[3] The first therapeutic use of gene transfer as well as the first direct insertion of human DNA into the nuclear genome was performed by French Anderson in a trial starting in September 1990. It is thought to be able to cure many genetic disorders or treat them over time.

Between 1989 and December 2018, over 2,900 clinical trials were conducted, with more than half of them in phase I.[4] As of 2017, Spark Therapeutics' Luxturna (RPE65 mutation-induced blindness) and Novartis' Kymriah (Chimeric antigen receptor T cell therapy) are the FDA's first approved gene therapies to enter the market. Since that time, drugs such as Novartis' Zolgensma and Alnylam's Patisiran have also received FDA approval, in addition to other companies' gene therapy drugs. Most of these approaches utilize adeno-associated viruses (AAVs) and lentiviruses for performing gene insertions, in vivo and ex vivo, respectively. AAVs are characterized by stabilizing the viral capsid, lower immunogenicity, ability to transduce both dividing and nondividing cells, the potential to integrate site specifically and to achieve long-term expression in the in-vivo treatment. (Gorell et al. 2014) ASO / siRNA approaches such as those conducted by Alnylam and Ionis Pharmaceuticals require non-viral delivery systems, and utilize alternative mechanisms for trafficking to liver cells by way of GalNAc transporters.

The concept of gene therapy is to fix a genetic problem at its source. If, for instance, a mutation in a certain gene causes the production of a dysfunctional protein resulting (usually recessively) in an inherited disease, gene therapy could be used to deliver a copy of this gene that does not contain the deleterious mutation and thereby produces a functional protein. This strategy is referred to as gene replacement therapy and is employed to treat inherited retinal diseases.[5][6]

While the concept of gene replacement therapy is mostly suitable for recessive diseases, novel strategies have been suggested that are capable of also treating conditions with a dominant pattern of inheritance.

Not all medical procedures that introduce alterations to a patient's genetic makeup can be considered gene therapy. Bone marrow transplantation and organ transplants in general have been found to introduce foreign DNA into patients.[13]

Gene therapy was conceptualized in 1972, by authors who urged caution before commencing human gene therapy studies.

The first attempt, an unsuccessful one, at gene therapy (as well as the first case of medical transfer of foreign genes into humans not counting organ transplantation) was performed by Martin Cline on 10 July 1980.[14][15] Cline claimed that one of the genes in his patients was active six months later, though he never published this data or had it verified[16] and even if he is correct, it's unlikely it produced any significant beneficial effects treating beta thalassemia.[medical citation needed]

After extensive research on animals throughout the 1980s and a 1989 bacterial gene tagging trial on humans, the first gene therapy widely accepted as a success was demonstrated in a trial that started on 14 September 1990, when Ashanthi DeSilva was treated for ADA-SCID.[17]

The first somatic treatment that produced a permanent genetic change was initiated in 1993.[18] The goal was to cure malignant brain tumors by using recombinant DNA to transfer a gene making the tumor cells sensitive to a drug that in turn would cause the tumor cells to die.[19]

The polymers are either translated into proteins, interfere with target gene expression, or possibly correct genetic mutations. The most common form uses DNA that encodes a functional, therapeutic gene to replace a mutated gene. The polymer molecule is packaged within a "vector", which carries the molecule inside cells.[medical citation needed]

Early clinical failures led to dismissals of gene therapy. Clinical successes since 2006 regained researchers' attention, although as of 2014[update], it was still largely an experimental technique.[20] These include treatment of retinal diseases Leber's congenital amaurosis[5][21][22][23] and choroideremia,[24] X-linked SCID,[25] ADA-SCID,[26][27] adrenoleukodystrophy,[28] chronic lymphocytic leukemia (CLL),[29] acute lymphocytic leukemia (ALL),[30] multiple myeloma,[31] haemophilia,[27] and Parkinson's disease.[32] Between 2013 and April 2014, US companies invested over $600 million in the field.[33]

The first commercial gene therapy, Gendicine, was approved in China in 2003, for the treatment of certain cancers.[34] In 2011, Neovasculgen was registered in Russia as the first-in-class gene-therapy drug for treatment of peripheral artery disease, including critical limb ischemia.[35] In 2012, Glybera, a treatment for a rare inherited disorder, lipoprotein lipase deficiency, became the first treatment to be approved for clinical use in either Europe or the United States after its endorsement by the European Commission.[20][36]

Following early advances in genetic engineering of bacteria, cells, and small animals, scientists started considering how to apply it to medicine. Two main approaches were considered replacing or disrupting defective genes.[37] Scientists focused on diseases caused by single-gene defects, such as cystic fibrosis, haemophilia, muscular dystrophy, thalassemia, and sickle cell anemia. Glybera treats one such disease, caused by a defect in lipoprotein lipase.[36]

DNA must be administered, reach the damaged cells, enter the cell and either express or disrupt a protein.[38] Multiple delivery techniques have been explored. The initial approach incorporated DNA into an engineered virus to deliver the DNA into a chromosome.[39][40] Naked DNA approaches have also been explored, especially in the context of vaccine development.[41]

Generally, efforts focused on administering a gene that causes a needed protein to be expressed. More recently, increased understanding of nuclease function has led to more direct DNA editing, using techniques such as zinc finger nucleases and CRISPR. The vector incorporates genes into chromosomes. The expressed nucleases then knock out and replace genes in the chromosome. As of 2014[update] these approaches involve removing cells from patients, editing a chromosome and returning the transformed cells to patients.[42]

Gene editing is a potential approach to alter the human genome to treat genetic diseases,[7] viral diseases,[43] and cancer.[44][45] As of 2020[update] these approaches are being studied in clinical trials.[46][47]

Gene therapy may be classified into two types:

In somatic cell gene therapy (SCGT), the therapeutic genes are transferred into any cell other than a gamete, germ cell, gametocyte, or undifferentiated stem cell. Any such modifications affect the individual patient only, and are not inherited by offspring. Somatic gene therapy represents mainstream basic and clinical research, in which therapeutic DNA (either integrated in the genome or as an external episome or plasmid) is used to treat disease.[48]

Over 600 clinical trials utilizing SCGT are underway[when?] in the US. Most focus on severe genetic disorders, including immunodeficiencies, haemophilia, thalassaemia, and cystic fibrosis. Such single gene disorders are good candidates for somatic cell therapy. The complete correction of a genetic disorder or the replacement of multiple genes is not yet possible. Only a few of the trials are in the advanced stages.[49][needs update]

In germline gene therapy (GGT), germ cells (sperm or egg cells) are modified by the introduction of functional genes into their genomes. Modifying a germ cell causes all the organism's cells to contain the modified gene. The change is therefore heritable and passed on to later generations. Australia, Canada, Germany, Israel, Switzerland, and the Netherlands[50] prohibit GGT for application in human beings, for technical and ethical reasons, including insufficient knowledge about possible risks to future generations[50] and higher risks versus SCGT.[51] The US has no federal controls specifically addressing human genetic modification (beyond FDA regulations for therapies in general).[50][52][53][54]

The delivery of DNA into cells can be accomplished by multiple methods. The two major classes are recombinant viruses (sometimes called biological nanoparticles or viral vectors) and naked DNA or DNA complexes (non-viral methods).[55]

In order to replicate, viruses introduce their genetic material into the host cell, tricking the host's cellular machinery into using it as blueprints for viral proteins. Retroviruses go a stage further by having their genetic material copied into the genome of the host cell. Scientists exploit this by substituting a virus's genetic material with therapeutic DNA. (The term 'DNA' may be an oversimplification, as some viruses contain RNA, and gene therapy could take this form as well.) A number of viruses have been used for human gene therapy, including retroviruses, adenoviruses, herpes simplex, vaccinia, and adeno-associated virus.[4] Like the genetic material (DNA or RNA) in viruses, therapeutic DNA can be designed to simply serve as a temporary blueprint that is degraded naturally or (at least theoretically) to enter the host's genome, becoming a permanent part of the host's DNA in infected cells.

Non-viral vectors for gene therapy[56] present certain advantages over viral methods, such as large scale production and low host immunogenicity. However, non-viral methods initially produced lower levels of transfection and gene expression, and thus lower therapeutic efficacy. Newer technologies offer promise of solving these problems, with the advent of increased cell-specific targeting and subcellular trafficking control.

Methods for non-viral gene therapy include the injection of naked DNA, electroporation, the gene gun, sonoporation, magnetofection, the use of oligonucleotides, lipoplexes, dendrimers, and inorganic nanoparticles.

More recent approaches, such as those performed by companies such as Ligandal, offer the possibility of creating cell-specific targeting technologies for a variety of gene therapy modalities, including RNA, DNA and gene editing tools such as CRISPR. Other companies, such as Arbutus Biopharma and Arcturus Therapeutics, offer non-viral, non-cell-targeted approaches that mainly exhibit liver trophism. In more recent years, startups such as Sixfold Bio, GenEdit, and Spotlight Therapeutics have begun to solve the non-viral gene delivery problem. Non-viral techniques offer the possibility of repeat dosing and greater tailorability of genetic payloads, which in the future will be more likely to take over viral-based delivery systems.

Companies such as Editas Medicine, Intellia Therapeutics, CRISPR Therapeutics, Casebia, Cellectis, Precision Biosciences, bluebird bio, and Sangamo have developed non-viral gene editing techniques, however frequently still use viruses for delivering gene insertion material following genomic cleavage by guided nucleases. These companies focus on gene editing, and still face major delivery hurdles.

BioNTech, Moderna Therapeutics and CureVac focus on delivery of mRNA payloads, which are necessarily non-viral delivery problems.

Alnylam, Dicerna Pharmaceuticals, and Ionis Pharmaceuticals focus on delivery of siRNA (antisense oligonucleotides) for gene suppression, which also necessitate non-viral delivery systems.

In academic contexts, a number of laboratories are working on delivery of PEGylated particles, which form serum protein coronas and chiefly exhibit LDL receptor mediated uptake in cells in vivo.[57]

In in vivo gene therapy, a vector (typically, a virus) is introduced to the patient, which then achieves the desired biological effect by passing the genetic material (e.g. for a missing protein) into the patient's cells. In ex vivo gene therapies, such as CAR-T therapeutics, the patient's own cells (autologous) or healthy donor cells (allogeneic) are modified outside the body (hence, ex vivo) using a vector to express a particular protein, such as a chimeric antigen receptor.[58]

In vivo gene therapy is seen as simpler, since it does not require the harvesting of mitotic cells. However, ex vivo gene therapies are better tolerated and less associated with severe immune responses.[59] The death of Jesse Gelsinger in a trial of an adenovirus-vectored treatment for ornithine transcarbamylase deficiency due to a systemic inflammatory reaction led to a temporary halt on gene therapy trials across the United States.[60] As of 2021[update], in vivo and ex vivo therapeutics are both seen as safe.[61]

Athletes may adopt gene therapy technologies to improve their performance.[62] Gene doping is not known to occur, but multiple gene therapies may have such effects. Kayser et al. argue that gene doping could level the playing field if all athletes receive equal access. Critics claim that any therapeutic intervention for non-therapeutic/enhancement purposes compromises the ethical foundations of medicine and sports.[63]

Genetic engineering could be used to cure diseases, but also to change physical appearance, metabolism, and even improve physical capabilities and mental faculties such as memory and intelligence. Ethical claims about germline engineering include beliefs that every fetus has a right to remain genetically unmodified, that parents hold the right to genetically modify their offspring, and that every child has the right to be born free of preventable diseases.[64][65][66] For parents, genetic engineering could be seen as another child enhancement technique to add to diet, exercise, education, training, cosmetics, and plastic surgery.[67][68] Another theorist claims that moral concerns limit but do not prohibit germline engineering.[69]

A recent issue of the journal Bioethics was devoted to moral issues surrounding germline genetic engineering in people.[70]

Possible regulatory schemes include a complete ban, provision to everyone, or professional self-regulation. The American Medical Association's Council on Ethical and Judicial Affairs stated that "genetic interventions to enhance traits should be considered permissible only in severely restricted situations: (1) clear and meaningful benefits to the fetus or child; (2) no trade-off with other characteristics or traits; and (3) equal access to the genetic technology, irrespective of income or other socioeconomic characteristics."[71]

As early in the history of biotechnology as 1990, there have been scientists opposed to attempts to modify the human germline using these new tools,[72] and such concerns have continued as technology progressed.[73][74] With the advent of new techniques like CRISPR, in March 2015 a group of scientists urged a worldwide moratorium on clinical use of gene editing technologies to edit the human genome in a way that can be inherited.[75][76][77][78] In April 2015, researchers sparked controversy when they reported results of basic research to edit the DNA of non-viable human embryos using CRISPR.[79][80] A committee of the American National Academy of Sciences and National Academy of Medicine gave qualified support to human genome editing in 2017[81][82] once answers have been found to safety and efficiency problems "but only for serious conditions under stringent oversight."[83]

Gene therapy approaches to replace a faulty gene with a healthy gene have been proposed and are being studied for treating some genetic diseases. Diseases such as sickle cell disease that are caused by autosomal recessive disorders for which a person's normal phenotype or cell function may be restored in cells that have the disease by a normal copy of the gene that is mutated, may be a good candidate for gene therapy treatment.[84][85] The risks and benefits related to gene therapy for sickle cell disease are not known.[85]

Some genetic therapies have been approved by the U.S. Food and Drug Administration (FDA), the European Medicines Agency (EMA), and for use in Russia and China.

Some of the unsolved problems include:

Three patients' deaths have been reported in gene therapy trials, putting the field under close scrutiny. The first was that of Jesse Gelsinger, who died in 1999, because of immune rejection response.[109][110] One X-SCID patient died of leukemia in 2003.[17] In 2007, a rheumatoid arthritis patient died from an infection; the subsequent investigation concluded that the death was not related to gene therapy.[111]

Regulations covering genetic modification are part of general guidelines about human-involved biomedical research.[citation needed] There are no international treaties which are legally binding in this area, but there are recommendations for national laws from various bodies.[citation needed]

The Helsinki Declaration (Ethical Principles for Medical Research Involving Human Subjects) was amended by the World Medical Association's General Assembly in 2008. This document provides principles physicians and researchers must consider when involving humans as research subjects. The Statement on Gene Therapy Research initiated by the Human Genome Organization (HUGO) in 2001, provides a legal baseline for all countries. HUGO's document emphasizes human freedom and adherence to human rights, and offers recommendations for somatic gene therapy, including the importance of recognizing public concerns about such research.[112]

No federal legislation lays out protocols or restrictions about human genetic engineering. This subject is governed by overlapping regulations from local and federal agencies, including the Department of Health and Human Services, the FDA and NIH's Recombinant DNA Advisory Committee. Researchers seeking federal funds for an investigational new drug application, (commonly the case for somatic human genetic engineering,) must obey international and federal guidelines for the protection of human subjects.[113]

NIH serves as the main gene therapy regulator for federally funded research. Privately funded research is advised to follow these regulations. NIH provides funding for research that develops or enhances genetic engineering techniques and to evaluate the ethics and quality in current research. The NIH maintains a mandatory registry of human genetic engineering research protocols that includes all federally funded projects.[114]

An NIH advisory committee published a set of guidelines on gene manipulation.[115] The guidelines discuss lab safety as well as human test subjects and various experimental types that involve genetic changes. Several sections specifically pertain to human genetic engineering, including Section III-C-1. This section describes required review processes and other aspects when seeking approval to begin clinical research involving genetic transfer into a human patient.[116] The protocol for a gene therapy clinical trial must be approved by the NIH's Recombinant DNA Advisory Committee prior to any clinical trial beginning; this is different from any other kind of clinical trial.[115]

As with other kinds of drugs, the FDA regulates the quality and safety of gene therapy products and supervises how these products are used clinically. Therapeutic alteration of the human genome falls under the same regulatory requirements as any other medical treatment. Research involving human subjects, such as clinical trials, must be reviewed and approved by the FDA and an Institutional Review Board.[117][118]

In 1972, Friedmann and Roblin authored a paper in Science titled "Gene therapy for human genetic disease?".[119] Rogers (1970) was cited for proposing that exogenous good DNA be used to replace the defective DNA in those with genetic defects.[120]

In 1984, a retrovirus vector system was designed that could efficiently insert foreign genes into mammalian chromosomes.[121]

The first approved gene therapy clinical research in the US took place on 14 September 1990, at the National Institutes of Health (NIH), under the direction of William French Anderson.[122] Four-year-old Ashanti DeSilva received treatment for a genetic defect that left her with adenosine deaminase deficiency (ADA-SCID), a severe immune system deficiency. The defective gene of the patient's blood cells was replaced by the functional variant. Ashanti's immune system was partially restored by the therapy. Production of the missing enzyme was temporarily stimulated, but the new cells with functional genes were not generated. She led a normal life only with the regular injections performed every two months. The effects were successful, but temporary.[123]

Cancer gene therapy was introduced in 1992/93 (Trojan et al. 1993).[124] The treatment of glioblastoma multiforme, the malignant brain tumor whose outcome is always fatal, was done using a vector expressing antisense IGF-I RNA (clinical trial approved by NIH protocol no.1602 24 November 1993,[125] and by the FDA in 1994). This therapy also represents the beginning of cancer immunogene therapy, a treatment which proves to be effective due to the anti-tumor mechanism of IGF-I antisense, which is related to strong immune and apoptotic phenomena.

In 1992, Claudio Bordignon, working at the Vita-Salute San Raffaele University, performed the first gene therapy procedure using hematopoietic stem cells as vectors to deliver genes intended to correct hereditary diseases.[126] In 2002, this work led to the publication of the first successful gene therapy treatment for ADA-SCID. The success of a multi-center trial for treating children with SCID (severe combined immune deficiency or "bubble boy" disease) from 2000 and 2002, was questioned when two of the ten children treated at the trial's Paris center developed a leukemia-like condition. Clinical trials were halted temporarily in 2002, but resumed after regulatory review of the protocol in the US, the United Kingdom, France, Italy, and Germany.[127]

In 1993, Andrew Gobea was born with SCID following prenatal genetic screening. Blood was removed from his mother's placenta and umbilical cord immediately after birth, to acquire stem cells. The allele that codes for adenosine deaminase (ADA) was obtained and inserted into a retrovirus. Retroviruses and stem cells were mixed, after which the viruses inserted the gene into the stem cell chromosomes. Stem cells containing the working ADA gene were injected into Andrew's blood. Injections of the ADA enzyme were also given weekly. For four years T cells (white blood cells), produced by stem cells, made ADA enzymes using the ADA gene. After four years more treatment was needed.[128]

Jesse Gelsinger's death in 1999 impeded gene therapy research in the US.[129][130] As a result, the FDA suspended several clinical trials pending the reevaluation of ethical and procedural practices.[131]

The modified gene therapy strategy of antisense IGF-I RNA (NIH n 1602)[125] using antisense / triple helix anti-IGF-I approach was registered in 2002, by Wiley gene therapy clinical trial - n 635 and 636. The approach has shown promising results in the treatment of six different malignant tumors: glioblastoma, cancers of liver, colon, prostate, uterus, and ovary (Collaborative NATO Science Programme on Gene Therapy USA, France, Poland n LST 980517 conducted by J. Trojan) (Trojan et al., 2012). This anti-gene antisense/triple helix therapy has proven to be efficient, due to the mechanism stopping simultaneously IGF-I expression on translation and transcription levels, strengthening anti-tumor immune and apoptotic phenomena.

Sickle cell disease can be treated in mice.[132] The mice which have essentially the same defect that causes human cases used a viral vector to induce production of fetal hemoglobin (HbF), which normally ceases to be produced shortly after birth. In humans, the use of hydroxyurea to stimulate the production of HbF temporarily alleviates sickle cell symptoms. The researchers demonstrated this treatment to be a more permanent means to increase therapeutic HbF production.[133]

A new gene therapy approach repaired errors in messenger RNA derived from defective genes. This technique has the potential to treat thalassaemia, cystic fibrosis and some cancers.[134]

Researchers created liposomes 25 nanometers across that can carry therapeutic DNA through pores in the nuclear membrane.[135]

In 2003, a research team inserted genes into the brain for the first time. They used liposomes coated in a polymer called polyethylene glycol, which unlike viral vectors, are small enough to cross the bloodbrain barrier.[136]

Short pieces of double-stranded RNA (short, interfering RNAs or siRNAs) are used by cells to degrade RNA of a particular sequence. If a siRNA is designed to match the RNA copied from a faulty gene, then the abnormal protein product of that gene will not be produced.[137]

Gendicine is a cancer gene therapy that delivers the tumor suppressor gene p53 using an engineered adenovirus. In 2003, it was approved in China for the treatment of head and neck squamous cell carcinoma.[34]

In March, researchers announced the successful use of gene therapy to treat two adult patients for X-linked chronic granulomatous disease, a disease which affects myeloid cells and damages the immune system. The study is the first to show that gene therapy can treat the myeloid system.[138]

In May, a team reported a way to prevent the immune system from rejecting a newly delivered gene.[139] Similar to organ transplantation, gene therapy has been plagued by this problem. The immune system normally recognizes the new gene as foreign and rejects the cells carrying it. The research utilized a newly uncovered network of genes regulated by molecules known as microRNAs. This natural function selectively obscured their therapeutic gene in immune system cells and protected it from discovery. Mice infected with the gene containing an immune-cell microRNA target sequence did not reject the gene.

In August, scientists successfully treated metastatic melanoma in two patients using killer T cells genetically retargeted to attack the cancer cells.[140]

In November, researchers reported on the use of VRX496, a gene-based immunotherapy for the treatment of HIV that uses a lentiviral vector to deliver an antisense gene against the HIV envelope. In a phase I clinical trial, five subjects with chronic HIV infection who had failed to respond to at least two antiretroviral regimens were treated. A single intravenous infusion of autologous CD4 T cells genetically modified with VRX496 was well tolerated. All patients had stable or decreased viral load; four of the five patients had stable or increased CD4 T cell counts. All five patients had stable or increased immune response to HIV antigens and other pathogens. This was the first evaluation of a lentiviral vector administered in a US human clinical trial.[141][142]

In May, researchers announced the first gene therapy trial for inherited retinal disease. The first operation was carried out on a 23-year-old British male, Robert Johnson, in early 2007.[143]

Leber's congenital amaurosis is an inherited blinding disease caused by mutations in the RPE65 gene. The results of a small clinical trial in children were published in April.[5] Delivery of recombinant adeno-associated virus (AAV) carrying RPE65 yielded positive results. In May, two more groups reported positive results in independent clinical trials using gene therapy to treat the condition. In all three clinical trials, patients recovered functional vision without apparent side-effects.[5][21][22][23]

In September researchers were able to give trichromatic vision to squirrel monkeys.[144] In November 2009, researchers halted a fatal genetic disorder called adrenoleukodystrophy in two children using a lentivirus vector to deliver a functioning version of ABCD1, the gene that is mutated in the disorder.[145]

An April paper reported that gene therapy addressed achromatopsia (color blindness) in dogs by targeting cone photoreceptors. Cone function and day vision were restored for at least 33 months in two young specimens. The therapy was less efficient for older dogs.[146]

In September it was announced that an 18-year-old male patient in France with beta thalassemia major had been successfully treated.[147] Beta thalassemia major is an inherited blood disease in which beta haemoglobin is missing and patients are dependent on regular lifelong blood transfusions.[148] The technique used a lentiviral vector to transduce the human -globin gene into purified blood and marrow cells obtained from the patient in June 2007.[149] The patient's haemoglobin levels were stable at 9 to 10 g/dL. About a third of the hemoglobin contained the form introduced by the viral vector and blood transfusions were not needed.[149][150] Further clinical trials were planned.[151] Bone marrow transplants are the only cure for thalassemia, but 75% of patients do not find a matching donor.[150]

Cancer immunogene therapy using modified antigene, antisense/triple helix approach was introduced in South America in 2010/11 in La Sabana University, Bogota (Ethical Committee 14 December 2010, no P-004-10). Considering the ethical aspect of gene diagnostic and gene therapy targeting IGF-I, the IGF-I expressing tumors i.e. lung and epidermis cancers were treated (Trojan et al. 2016).[152][153]

In 2007 and 2008, a man (Timothy Ray Brown) was cured of HIV by repeated hematopoietic stem cell transplantation (see also allogeneic stem cell transplantation, allogeneic bone marrow transplantation, allotransplantation) with double-delta-32 mutation which disables the CCR5 receptor. This cure was accepted by the medical community in 2011.[154] It required complete ablation of existing bone marrow, which is very debilitating.[155]

In August two of three subjects of a pilot study were confirmed to have been cured from chronic lymphocytic leukemia (CLL). The therapy used genetically modified T cells to attack cells that expressed the CD19 protein to fight the disease.[29] In 2013, the researchers announced that 26 of 59 patients had achieved complete remission and the original patient had remained tumor-free.[156]

Human HGF plasmid DNA therapy of cardiomyocytes is being examined as a potential treatment for coronary artery disease as well as treatment for the damage that occurs to the heart after myocardial infarction.[157][158]

In 2011, Neovasculgen was registered in Russia as the first-in-class gene-therapy drug for treatment of peripheral artery disease, including critical limb ischemia; it delivers the gene encoding for VEGF.[35] Neovasculogen is a plasmid encoding the CMV promoter and the 165 amino acid form of VEGF.[159][160]

The FDA approved Phase I clinical trials on thalassemia major patients in the US for 10 participants in July.[161] The study was expected to continue until 2015.[151]

In July 2012, the European Medicines Agency recommended approval of a gene therapy treatment for the first time in either Europe or the United States. The treatment used Alipogene tiparvovec (Glybera) to compensate for lipoprotein lipase deficiency, which can cause severe pancreatitis.[162] The recommendation was endorsed by the European Commission in November 2012,[20][36][163][164] and commercial rollout began in late 2014.[165] Alipogene tiparvovec was expected to cost around $1.6 million per treatment in 2012,[166] revised to $1 million in 2015,[167] making it the most expensive medicine in the world at the time.[168] As of 2016[update], only the patients treated in clinical trials and a patient who paid the full price for treatment have received the drug.[169]

In December 2012, it was reported that 10 of 13 patients with multiple myeloma were in remission "or very close to it" three months after being injected with a treatment involving genetically engineered T cells to target proteins NY-ESO-1 and LAGE-1, which exist only on cancerous myeloma cells.[31]

In March researchers reported that three of five adult subjects who had acute lymphocytic leukemia (ALL) had been in remission for five months to two years after being treated with genetically modified T cells which attacked cells with CD19 genes on their surface, i.e. all B cells, cancerous or not. The researchers believed that the patients' immune systems would make normal T cells and B cells after a couple of months. They were also given bone marrow. One patient relapsed and died and one died of a blood clot unrelated to the disease.[30]

Following encouraging Phase I trials, in April, researchers announced they were starting Phase II clinical trials (called CUPID2 and SERCA-LVAD) on 250 patients[170] at several hospitals to combat heart disease. The therapy was designed to increase the levels of SERCA2, a protein in heart muscles, improving muscle function.[171] The U.S. Food and Drug Administration (FDA) granted this a breakthrough therapy designation to accelerate the trial and approval process.[172] In 2016, it was reported that no improvement was found from the CUPID 2 trial.[173]

In July researchers reported promising results for six children with two severe hereditary diseases had been treated with a partially deactivated lentivirus to replace a faulty gene and after 732 months. Three of the children had metachromatic leukodystrophy, which causes children to lose cognitive and motor skills.[174] The other children had WiskottAldrich syndrome, which leaves them to open to infection, autoimmune diseases, and cancer.[175] Follow up trials with gene therapy on another six children with WiskottAldrich syndrome were also reported as promising.[176][177]

In October researchers reported that two children born with adenosine deaminase severe combined immunodeficiency disease (ADA-SCID) had been treated with genetically engineered stem cells 18 months previously and that their immune systems were showing signs of full recovery. Another three children were making progress.[27] In 2014, a further 18 children with ADA-SCID were cured by gene therapy.[178] ADA-SCID children have no functioning immune system and are sometimes known as "bubble children".[27]

Also in October researchers reported that they had treated six people with haemophilia in early 2011 using an adeno-associated virus. Over two years later all six were producing clotting factor.[27][179]

In January researchers reported that six choroideremia patients had been treated with adeno-associated virus with a copy of REP1. Over a six-month to two-year period all had improved their sight.[6][180] By 2016, 32 patients had been treated with positive results and researchers were hopeful the treatment would be long-lasting.[24] Choroideremia is an inherited genetic eye disease with no approved treatment, leading to loss of sight.

In March researchers reported that 12 HIV patients had been treated since 2009 in a trial with a genetically engineered virus with a rare mutation (CCR5 deficiency) known to protect against HIV with promising results.[181][182]

Clinical trials of gene therapy for sickle cell disease were started in 2014.[183][184]

In February LentiGlobin BB305, a gene therapy treatment undergoing clinical trials for treatment of beta thalassemia gained FDA "breakthrough" status after several patients were able to forgo the frequent blood transfusions usually required to treat the disease.[185]

In March researchers delivered a recombinant gene encoding a broadly neutralizing antibody into monkeys infected with simian HIV; the monkeys' cells produced the antibody, which cleared them of HIV. The technique is named immunoprophylaxis by gene transfer (IGT). Animal tests for antibodies to ebola, malaria, influenza, and hepatitis were underway.[186][187]

In March, scientists, including an inventor of CRISPR, Jennifer Doudna, urged a worldwide moratorium on germline gene therapy, writing "scientists should avoid even attempting, in lax jurisdictions, germline genome modification for clinical application in humans" until the full implications "are discussed among scientific and governmental organizations".[75][76][77][78]

In October, researchers announced that they had treated a baby girl, Layla Richards, with an experimental treatment using donor T cells genetically engineered using TALEN to attack cancer cells. One year after the treatment she was still free of her cancer (a highly aggressive form of acute lymphoblastic leukaemia [ALL]).[188] Children with highly aggressive ALL normally have a very poor prognosis and Layla's disease had been regarded as terminal before the treatment.[189]

In December, scientists of major world academies called for a moratorium on inheritable human genome edits, including those related to CRISPR-Cas9 technologies[190] but that basic research including embryo gene editing should continue.[191]

Researchers successfully treated a boy with epidermolysis bullosa using skin grafts grown from his own skin cells, genetically altered to repair the mutation that caused his disease.[192]

In April the Committee for Medicinal Products for Human Use of the European Medicines Agency endorsed a gene therapy treatment called Strimvelis[193][194] and the European Commission approved it in June.[195] This treats children born with adenosine deaminase deficiency and who have no functioning immune system. This was the second gene therapy treatment to be approved in Europe.[196]

In October, Chinese scientists reported they had started a trial to genetically modify T cells from 10 adult patients with lung cancer and reinject the modified T cells back into their bodies to attack the cancer cells. The T cells had the PD-1 protein (which stops or slows the immune response) removed using CRISPR-Cas9.[197][198]

A 2016 Cochrane systematic review looking at data from four trials on topical cystic fibrosis transmembrane conductance regulator (CFTR) gene therapy does not support its clinical use as a mist inhaled into the lungs to treat cystic fibrosis patients with lung infections. One of the four trials did find weak evidence that liposome-based CFTR gene transfer therapy may lead to a small respiratory improvement for people with CF. This weak evidence is not enough to make a clinical recommendation for routine CFTR gene therapy.[199]

In February Kite Pharma announced results from a clinical trial of CAR-T cells in around a hundred people with advanced non-Hodgkin lymphoma.[200]

In March, French scientists reported on clinical research of gene therapy to treat sickle cell disease.[201]

In August, the FDA approved tisagenlecleucel for acute lymphoblastic leukemia.[202] Tisagenlecleucel is an adoptive cell transfer therapy for B-cell acute lymphoblastic leukemia; T cells from a person with cancer are removed, genetically engineered to make a specific T-cell receptor (a chimeric T cell receptor, or "CAR-T") that reacts to the cancer, and are administered back to the person. The T cells are engineered to target a protein called CD19 that is common on B cells. This is the first form of gene therapy to be approved in the United States. In October, a similar therapy called axicabtagene ciloleucel was approved for non-Hodgkin lymphoma.[203]

In October, biophysicist and biohacker Josiah Zayner claimed to have performed the very first in-vivo human genome editing in the form of a self-administered therapy.[204][205]

On 13 November, medical scientists working with Sangamo Therapeutics, headquartered in Richmond, California, announced the first ever in-body human gene editing therapy.[206][207] The treatment, designed to permanently insert a healthy version of the flawed gene that causes Hunter syndrome, was given to 44-year-old Brian Madeux and is part of the world's first study to permanently edit DNA inside the human body.[208] The success of the gene insertion was later confirmed.[209][210] Clinical trials by Sangamo involving gene editing using zinc finger nuclease (ZFN) are ongoing.[211]

View post:
Gene therapy - Wikipedia

Somatic evolution in cancer – Wikipedia

Somatic evolution is the accumulation of mutations and epimutations in somatic cells (the cells of a body, as opposed to germ plasm and stem cells) during a lifetime, and the effects of those mutations and epimutations on the fitness of those cells. This evolutionary process has first been shown by the studies of Bert Vogelstein in colon cancer. Somatic evolution is important in the process of aging as well as the development of some diseases, including cancer.

Cells in pre-malignant and malignant neoplasms (tumors) evolve by natural selection.[1][2] This accounts for how cancer develops from normal tissue and why it has been difficult to cure. There are three necessary and sufficient conditions for natural selection, all of which are met in a neoplasm:

Cells in neoplasms compete for resources, such as oxygen and glucose, as well as space. Thus, a cell that acquires a mutation that increases its fitness will generate more daughter cells than competitor cells that lack that mutation. In this way, a population of mutant cells, called a clone, can expand in the neoplasm. Clonal expansion is the signature of natural selection in cancer.

Cancer therapies act as a form of artificial selection, killing sensitive cancer cells, but leaving behind resistant cells. Often the tumor will regrow from those resistant cells, the patient will relapse, and the therapy that had been previously used will no longer kill the cancer cells. This selection for resistance is similar to the repeatedly spraying crops with a pesticide and selecting for resistant pests until the pesticide is no longer effective.

Modern descriptions of biological evolution will typically elaborate on major contributing factors to evolution such as the formation of local micro-environments, mutational robustness, molecular degeneracy, and cryptic genetic variation.[4] Many of these contributing factors in evolution have been isolated and described for cancer.[5]

Cancer is a classic example of what evolutionary biologists call multilevel selection: at the level of the organism, cancer is usually fatal so there is selection for genes and the organization of tissues[6][7] that suppress cancer. At the level of the cell, there is selection for increased cell proliferation and survival, such that a mutant cell that acquires one of the hallmarks of cancer[3] (see below), will have a competitive advantage over cells that have not acquired the hallmark. Thus, at the level of the cell there is selection for cancer.

The earliest ideas about neoplastic evolution come from Boveri[8] who proposed that tumors originated in chromosomal abnormalities passed on to daughter cells. In the decades that followed, cancer was recognized as having a clonal origin associated with chromosomal aberrations.[9][10][11][12]

Early mathematical modeling of cancer, by Armitage and Doll, set the stage for the future development of the somatic evolutionary theory of cancer. Armitage and Doll explained the cancer incidence data, as a function of age, as a process of the sequential accumulation of somatic mutations (or other rate limiting steps).[13]

Advances in cytogenetics facilitated discovery of chromosome abnormalities in neoplasms, including the Philadelphia chromosome in chronic myelogenous leukemia[14] and translocations in acute myeloblastic leukemia.[15] Sequences of karyotypes replacing one another in a tumor were observed as it progressed.[16][17][18] Researchers hypothesized that cancer evolves in a sequence of chromosomal mutations and selection[6][17][19][20] and that therapy may further select clones.[12]

In 1971, Knudson published the 2-hit hypothesis for mutation and cancer based on statistical analysis of inherited and sporadic cases of retinoblastoma.[21] He postulated that retinoblastoma developed as a consequence of two mutations; one of which could be inherited or somatic followed by a second somatic mutation. Cytogenetic studies localized the region to the long arm of chromosome 13, and molecular genetic studies demonstrated that tumorigenesis was associated with chromosomal mechanisms, such as mitotic recombination or non-disjunction, that could lead to homozygosity of the mutation.[22] The retinoblastoma gene was the first tumor suppressor gene to be cloned in 1986.

Cairns hypothesized a different, but complementary, mechanism of tumor suppression in 1975 based on tissue architecture to protect against selection of variant somatic cells with increased fitness in proliferating epithelial populations, such as the intestine and other epithelial organs.[6] He postulated that this could be accomplished by restricting the number of stem cells for example at the base of intestinal crypts and restraining the opportunities for competition between cells by shedding differentiated intestinal cells into the gut. The essential predictions of this model have been confirmed although mutations in some tumor suppressor genes, including CDKN2A (p16), predispose to clonal expansions that encompass large numbers of crypts in some conditions such as Barrett's esophagus. He also postulated an immortal DNA strand that is discussed at Immortal DNA strand hypothesis.

Nowell synthesized the evolutionary view of cancer in 1976 as a process of genetic instability and natural selection.[1] Most of the alterations that occur are deleterious for the cell, and those clones will tend to go extinct, but occasional selectively advantageous mutations arise that lead to clonal expansions. This theory predicts a unique genetic composition in each neoplasm due to the random process of mutations, genetic polymorphisms in the human population, and differences in the selection pressures of the neoplasm's microenvironment. Interventions are predicted to have varying results in different patients. What is more important, the theory predicts the emergence of resistant clones under the selective pressures of therapy. Since 1976, researchers have identified clonal expansions[23][24][25][26][27][28] and genetic heterogeneity[29][30][31][32][33][34] within many different types of neoplasms.

There are multiple levels of genetic heterogeneity associated with cancer, including single nucleotide polymorphism (SNP),[35] sequence mutations,[30] Microsatellite shifts[29] and instability,[36] loss of heterozygosity (LOH),[34] Copy number variation (detected both by comparative genomic hybridization (CGH),[31] and array CGH,[37]) and karyotypic variations including chromosome structural aberrations and aneuploidy.[32][33][38][39][40] Studies of this issue have focused mainly at the gene mutation level, as copy number variation, LOH and specific chromosomal translocations are explained in the context of gene mutation. It is thus necessary to integrate multiple levels of genetic variation in the context of complex system and multilevel selection.

System instability is a major contributing factor for genetic heterogeneity.[41] For the majority of cancers, genome instability is reflected in a large frequency of mutations in the whole genome DNA sequence (not just the protein coding regions that are only 1.5% of the genome[42]). In whole genome sequencing of different types of cancers, large numbers of mutations were found in two breast cancers (about 20,000 point mutations[43]), 25 melanomas (9,000 to 333,000 point mutations[44]) and a lung cancer (50,000 point mutations and 54,000 small additions and deletions[45]). Genome instability is also referred to as an enabling characteristic for achieving endpoints of cancer evolution.[3]

Many of the somatic evolutionary studies have traditionally been focused on clonal expansion, as recurrent types of changes can be traced to illustrate the evolutionary path based on available methods. Recent studies from both direct DNA sequencing and karyotype analysis illustrate the importance of the high level of heterogeneity in somatic evolution. For the formation of solid tumors, there is an involvement of multiple cycles of clonal and non-clonal expansion.[39][46] Even at the typical clonal expansion phase, there are significant levels of heterogeneity within the cell population, however, most are under-detected when mixed populations of cells are used for molecular analysis. In solid tumors, a majority of gene mutations are not recurrent types,[47] and neither are the karyotypes.[39][41] These analyses offer an explanation for the findings that there are no common mutations shared by most cancers.[48]

The state of a cell may be changed epigenetically, in addition to genetic alterations. The best-understood epigenetic alterations in tumors are the silencing or expression of genes by changes in the methylation of CG pairs of nucleotides in the promoter regions of the genes. These methylation patterns are copied to the new chromosomes when cells replicate their genomes and so methylation alterations are heritable and subject to natural selection. Methylation changes are thought to occur more frequently than mutations in the DNA, and so may account for many of the changes during neoplastic progression (the process by which normal tissue becomes cancerous), in particular in the early stages. For instance, when loss of expression of the DNA repair protein MGMT occurs in a colon cancer, it is caused by a mutation only about 4% of the time, while in most cases the loss is due to methylation of its promoter region.[49] Similarly, when loss of expression of the DNA repair protein PMS2 occurs in colon cancer, it is caused by a mutation about 5% of the time, while in most cases loss of expression is due to methylation of the promoter of its pairing partner MLH1 (PMS2 is unstable in the absence of MLH1).[50] Epigenetic changes in progression interact with genetic changes. For example, epigenetic silencing of genes responsible for the repair of mispairs or damages in the DNA (e.g. MLH1 or MSH2) results in an increase of genetic mutations.

Deficiency of DNA repair proteins PMS2, MLH1, MSH2, MSH3, MSH6 or BRCA2 can cause up to 100-fold increases in mutation frequency[51][52][53] Epigenetic deficiencies in DNA repair gene protein expression have been found in many cancers, though not all deficiencies have been evaluated in all cancers. Epigeneticically deficient DNA repair proteins include BRCA1, WRN, MGMT, MLH1, MSH2, ERCC1, PMS2, XPF, P53, PCNA and OGG1, and these are found to be deficient at frequencies of 13% to 100% in different cancers.[citation needed] (Also see Frequencies of epimutations in DNA repair genes.)

In addition to well studied epigenetic promoter methylation, more recently there have been substantial findings of epigenetic alterations in cancer due to changes in histone and chromatin architecture and alterations in the expression of microRNAs (microRNAs either cause degradation of messenger RNAs or block their translation)[54] For instance, hypomethylation of the promoter for microRNA miR-155 increases expression of miR-155, and this increased miR-155 targets DNA repair genes MLH1, MSH2 and MSH6, causing each of them to have reduced expression.[55]

In cancers, loss of expression of genes occurs about 10 times more frequently by transcription silencing (caused by somatically heritable promoter hypermethylation of CpG islands) than by mutations. As Vogelstein et al. point out, in a colorectal cancer there are usually about 3 to 6 driver mutations and 33 to 66 hitchhiker or passenger mutations.[56] In contrast, in colon tumors compared to adjacent normal-appearing colonic mucosa, there are about 600 to 800 somatically heritable heavily methylated CpG islands in promoters of genes in the tumors while these CpG islands are not methylated in the adjacent mucosa.[57][58][59]

Methylation of the cytosine of CpG dinucleotides is a somatically heritable and conserved regulatory mark that is generally associated with transcriptional repression. CpG islands keep their overall un-methylated state (or methylated state) extremely stably through multiple cell generations.[60]

One common feature of neoplastic progression is the expansion of a clone with a genetic or epigenetic alteration. This may be a matter of chance, but is more likely due to the expanding clone having a competitive advantage (either a reproductive or survival advantage) over other cells in the tissue. Since clones often have many genetic and epigenetic alterations in their genomes, it is often not clear which of those alterations cause a reproductive or survival advantage and which other alterations are simply hitchhikers or passenger mutations (see Glossary below) on the clonal expansion.

Clonal expansions are most often associated with the loss of the p53 (TP53) or p16 (CDKN2A/INK4a) tumor suppressor genes. In lung cancer, a clone with a p53 mutation was observed to have spread over the surface of one entire lung and into the other lung.[27] In bladder cancer, clones with loss of p16 were observed to have spread over the entire surface of the bladder.[61][62] Likewise, large expansions of clones with loss of p16 have been observed in the oral cavity[24] and in Barrett's esophagus.[25] Clonal expansions associated with inactivation of p53 have also appear in skin,[23][63] Barrett's esophagus,[25] brain,[64] and kidney.[65] Further clonal expansions have been observed in the stomach,[66] bladder,[67] colon,[68] lung,[69] hematopoietic (blood) cells,[70] and prostate.[71]

These clonal expansions are important for at least two reasons. First, they generate a large target population of mutant cells and so increase the probability that the multiple mutations necessary to cause cancer will be acquired within that clone. Second, in at least one case, the size of the clone with loss of p53 has been associated with an increased risk of a pre-malignant tumor becoming cancerous.[72] It is thought that the process of developing cancer involves successive waves of clonal expansions within the tumor.[73]

The term "field cancerization" was first used in 1953 to describe an area or "field" of epithelium that has been preconditioned by (at that time) largely unknown processes so as to predispose it towards development of cancer.[74] Since then, the terms "field cancerization" and "field defect" have been used to describe pre-malignant tissue in which new cancers are likely to arise. Field defects, for example, have been identified in most of the major areas subject to tumorigenesis in the gastrointestinal (GI) tract.[75] Cancers of the GI tract that are shown to be due, to some extent, to field defects include head and neck squamous cell carcinoma (HNSCC), oropharyngeal/laryngeal cancer, esophageal adenocarcinoma and esophageal squamous-cell carcinoma, gastric cancer, bile duct cancer, pancreatic cancer, small intestine cancer and colon cancer.

In the colon, a field defect probably arises by natural selection of a mutant or epigenetically altered cell among the stem cells at the base of one of the intestinal crypts on the inside surface of the colon. A mutant or epigenetically altered stem cell, if it has a selective advantage, could replace the other nearby stem cells by natural selection. This can cause a patch of abnormal tissue, or field defect. The figure in this section includes a photo of a freshly resected and lengthwise-opened segment of the colon that may represent a large field defect in which there is a colon cancer and four polyps. The four polyps, in addition to the cancer, may represent sub-clones with proliferative advantages.

The sequence of events giving rise to this possible field defect are indicated below the photo. The schematic diagram shows a large area in yellow indicating a large patch of mutant or epigenetically altered cells that formed by clonal expansion of an initial cell based on a selective advantage. Within this first large patch, a second such mutation or epigenetic alteration may have occurred so that a given stem cell acquired an additional selective advantage compared to the other stem cells within the patch, and this altered stem cell expanded clonally forming a secondary patch, or sub-clone, within the original patch. This is indicated in the diagram by four smaller patches of different colors within the large yellow original area. Within these new patches (sub-clones), the process may have been repeated multiple times, indicated by the still smaller patches within the four secondary patches (with still different colors in the diagram) which clonally expanded, until a stem cell arose that generated either small polyps (which may be benign neoplasms) or else a malignant neoplasm (cancer). These neoplasms are also indicated, in the diagram below the photo, by 4 small tan circles (polyps) and a larger red area (cancer). The cancer in the photo occurred in the cecal area of the colon, where the colon joins the small intestine (labeled) and where the appendix occurs (labeled). The fat in the photo is external to the outer wall of the colon. In the segment of colon shown here, the colon was cut open lengthwise to expose the inner surface of the colon and to display the cancer and polyps occurring within the inner epithelial lining of the colon.

Phylogenetics may be applied to cells in tumors to reveal the evolutionary relationships between cells, just as it is used to reveal evolutionary relationships between organisms and species. Shibata, Tavare and colleagues have exploited this to estimate the time between the initiation of a tumor and its detection in the clinic.[29] Louhelainen et al. have used parsimony to reconstruct the relationships between biopsy samples based on loss of heterozygosity.[76] Phylogenetic trees should not be confused with oncogenetic trees,[77] which represent the common sequences of genetic events during neoplastic progression and do not represent the relationships of common ancestry that are essential to a phylogeny. For an up-to-date review in this field, see Bast 2012.[78]

An adaptive landscape is a hypothetical topological landscape upon which evolution is envisioned to take place. It is similar to Wright's fitness landscape[79][80] in which the location of each point represents the genotype of an organism and the altitude represents the fitness of that organism in the current environment. However, unlike Wright's rigid landscape, the adaptive landscape is pliable. It readily changes shape with changes in population densities and survival/reproductive strategies used within and among the various species.

Wright's shifting balance theory of evolution combines genetic drift (random sampling error in the transmission of genes) and natural selection to explain how multiple peaks on a fitness landscape could be occupied or how a population can achieve a higher peak on this landscape. This theory, based on the assumption of density-dependent selection as the principal forms of selection, results in a fitness landscape that is relatively rigid. A rigid landscape is one that does not change in response to even large changes in the position and composition of strategies along the landscape.

In contrast to the fitness landscape, the adaptive landscape is constructed assuming that both density and frequency-dependent selection is involved (selection is frequency-dependant when the fitness of a species depends not only on that species strategy but also on the strategy of all other species). As such, the shape of the adaptive landscape can change drastically in response to even small changes in strategies and densities.[81]

The flexibility of adaptive landscapes provide several ways for natural selection to cross valleys and occupy multiple peaks without having to make large changes in their strategies. Within the context of differential or difference equation models for population dynamics, an adaptive landscape may actually be constructed using a fitness generating function.[82] If a given species is able to evolve, it will, over time, "climb" the adaptive landscape toward a fitness peak through gradual changes in its mean phenotype according to a strategy dynamic that involves the slope of the adaptive landscape. Because the adaptive landscape is not rigid and can change shape during the evolutionary process, it is possible that a species may be driven to maximum, minimum, or saddle point on the adaptive landscape. A population at a global maximum on the adaptive landscape corresponds an evolutionarily stable strategy (ESS) and will become dominant, driving all others toward extinction. Populations at a minimum or saddle point are not resistant to invasion, so that the introduction of a slightly different mutant strain may continue the evolutionary process toward unoccupied local maxima.

The adaptive landscape provides a useful tool for studying somatic evolution as it can describe the process of how a mutant cell evolves from a small tumor to an invasive cancer. Understanding this process in terms of the adaptive landscape may lead to the control of cancer through external manipulation of the shape of the landscape.[83][84]

In their landmark paper, The Hallmarks of Cancer,[3] Hanahan and Weinberg suggest that cancer can be described by a small number of underlying principles, despite the complexities of the disease. The authors describe how tumor progression proceeds via a process analogous to Darwinian evolution, where each genetic change confers a growth advantage to the cell. These genetic changes can be grouped into six "hallmarks", which drive a population of normal cells to become a cancer. The six hallmarks are:

Genetic instability is defined as an "enabling characteristic" that facilitates the acquisition of other mutations due to defects in DNA repair.

The hallmark "self-sufficiency in growth signals" describes the observation that tumor cells produce many of their own growth signals and thereby no longer rely on proliferation signals from the micro-environment. Normal cells are maintained in a nondividing state by antigrowth signals, which cancer cells learn to evade through genetic changes producing "insensitivity to antigrowth signals". A normal cell initiates programmed cell death (apoptosis) in response to signals such as DNA damage, oncogene overexpression, and survival factor insufficiency, but a cancer cell learns to "evade apoptosis", leading to the accumulation of aberrant cells. Most mammalian cells can replicate a limited number of times due to progressive shortening of telomeres; virtually all malignant cancer cells gain an ability to maintain their telomeres, conferring "limitless replicative potential". As cells cannot survive at distances of more than 100 m from a blood supply, cancer cells must initiate the formation of new blood vessels to support their growth via the process of "sustained angiogenesis". During the development of most cancers, primary tumor cells acquire the ability to undergo "invasion and metastasis" whereby they migrate into the surrounding tissue and travel to distant sites in the body, forming secondary tumors.

The pathways that cells take toward becoming malignant cancers are variable, and the order in which the hallmarks are acquired can vary from tumor to tumor. The early genetic events in tumorigenesis are difficult to measure clinically, but can be simulated according to known biology.[85] Macroscopic tumors are now beginning to be described in terms of their underlying genetic changes, providing additional data to refine the framework described in The Hallmarks of Cancer.

The theory about the monoclonal origin of cancer states that, in general, neoplasms arise from a single cell of origin.[1] While it is possible that certain carcinogens may mutate more than one cell at once, the tumor mass usually represents progeny of a single cell, or very few cells.[1] A series of mutations is required in the process of carcinogenesis for a cell to transition from being normal to pre-malignant and then to a cancer cell.[86] The mutated genes usually belong to classes of caretaker, gatekeeper, landscaper or several other genes. Mutation ultimately leads to acquisition of the ten hallmarks of cancer.

The first malignant cell, that gives rise to the tumor, is often labeled a cancer stem cell.[87]

The cancer stem-cell hypothesis relies on the fact that a lot of tumors are heterogeneous the cells in the tumor vary by phenotype and functions.[87][88][89] Current research shows that in many cancers there is apparent hierarchy among cells.[87][88][89] in general, there is a small population of cells in the tumor about 0.2%1%[88] that exhibits stem cell-like properties. These cells have the ability to give rise to a variety of cells in tumor tissue, self-renew indefinitely, and upon transfer can form new tumors. According to the hypothesis, cancer stem cells are the only cells capable of tumorigenesis initiation of a new tumor.[87] Cancer stem cell hypothesis might explain such phenomena as metastasis and remission.

The monoclonal model of cancer and the cancer stem-cell model are not mutually exclusive.[87] Cancer stem cell arises by clonal evolution as a result of selection for the cell with the highest fitness in the neoplasm. This way, the heterogeneous nature of neoplasm can be explained by two processes clonal evolution, or the hierarchical differentiation of cells, regulated by cancer stem cells.[87] All cancers arise as a result of somatic evolution, but only some of them fit the cancer stem cell hypothesis.[87] The evolutionary processes do not cease when a population of cancer stem cells arises in a tumor. Cancer treatment drugs pose a strong selective force on all types of cells in tumors, including cancer stem cells, which would be forced to evolve resistance to the treatment. Cancer stem cells do not always have to have the highest resistance among the cells in the tumor to survive chemotherapy and re-emerge afterwards. The surviving cells might be in a special microenvironment, which protects them from adverse effects of treatment.[87]

It is currently unclear as to whether cancer stem cells arise from adult stem cell transformation, a maturation arrest of progenitor cells, or as a result of dedifferentiation of mature cells.[88]

Therapeutic resistance has been observed in virtually every form of therapy, from the beginning of cancer therapy.[90] In most cases, therapies appear to select for mutations in the genes or pathways targeted by the drug.

Some of the first evidence for a genetic basis of acquired therapeutic resistance came from studies of methotrexate. Methotrexate inhibits the dihydrofolate reductase (DHFR) gene. However, methotrexate therapy appears to select for cells with extra copies (amplification) of DHFR, which are resistant to methotrexate. This was seen in both cell culture[91] and samples from tumors in patients that had been treated with methotrexate.[92][93][94][95]

A common cytotoxic chemotherapy used in a variety of cancers, 5-fluorouracil (5-FU), targets the TYMS pathway and resistance can evolve through the evolution of extra copies of TYMS, thereby diluting the drug's effect.[96]

In the case of Gleevec (Imatinib), which targets the BCR-ABL fusion gene in chronic myeloid leukemia, resistance often develops through a mutation that changes the shape of the binding site of the drug.[97][98] Sequential application of drugs can lead to the sequential evolution of resistance mutations to each drug in turn.[99]

Gleevec is not as selective as was originally thought. It turns out that it targets other tyrosine kinase genes and can be used to control gastrointestinal stromal tumors (GISTs) that are driven by mutations in c-KIT. However, patients with GIST sometimes relapse with additional mutations in c-KIT that make the cancer cells resistant to Gleevec.[100][101]

Gefitinib(Iressa) and Erlotinib (Tarceva) are epidermal growth factor receptor (EGFR) tyrosine kinase inhibitors used for non-small cell lung cancer patients whose tumors have somatic mutations in EGFR. However, most patients' tumors eventually become resistant to these drugs. Two major mechanisms of acquired resistance have been discovered in patients who have developed clinical resistance to Gefitinib or Erlotinib:[102] point mutations in the EGFR gene targeted by the drugs,[103] and amplification of MET, another receptor tyrosine kinase, which can bypass EGFR to activate downstream signaling in the cell. In an initial study, 22% of tumors with acquired resistance to Gefitinib or Erlotinib had MET amplification.[104] To address these issues, clinical trials are currently assessing irreversible EGFR inhibitors (which inhibit growth even in cell lines with mutations in EGFR), the combination of EGFR and MET kinase inhibitors, and Hsp90 inhibitors (EGFR and MET both require Hsp90 proteins to fold properly). In addition, taking repeated tumor biopsies from patients as they develop resistance to these drugs would help to understand the tumor dynamics.

Selective estrogen receptor modulators (SERMs) are a commonly used adjuvant therapy in estrogen-receptor positive (ER+) breast cancer and a preventive treatment for women at high risk of the disease. There are several possible mechanisms of SERM resistance, though the relative clinical importance of each is debated. These include:[105][106]

Most prostate cancers derive from cells that are stimulated to proliferate by androgens. Most prostate cancer therapies are therefore based on removing or blocking androgens. Mutations in the androgen receptor (AR) have been observed in anti-androgen resistant prostate cancer that makes the AR hypersensitive to the low levels of androgens that remain after therapy.[111] Likewise, extra copies of the AR gene (amplification) have been observed in anti-androgen resistant prostate cancer.[112] These additional copies of the gene are thought to make the cell hypersensitive to low levels of androgens and so allow them to proliferate under anti-androgen therapy.

Resistance to radiotherapy is also commonly observed. However, to date, comparisons of malignant tissue before and after radiotherapy have not been done to identify genetic and epigenetic changes selected by exposure to radiation. In gliomas, a form of brain cancer, radiation therapy appears to select for stem cells,[113][114] though it is unclear if the tumor returns to the pre-therapy proportion of cancer stem cells after therapy or if radiotherapy selects for an alteration that keeps the glioma cells in the stem cell state.

Cancer drugs and therapies commonly used today are evolutionary inert and represent a strong selection force, which leads to drug resistance.[115] A possible way to avoid that is to use a treatment agent that would co-evolve alongside cancer cells.

Anoxic bacteria could be used as competitors or predators in hypoxic environments within tumors.[115] Scientists have been interested in the idea of using anoxic bacteria for over 150 years, but until recently there has been little progress in that field. According to Jain and Forbes, several requirements have to be met by the cells to qualify as efficient anticancer bacterium:[116]

In the process of the treatment, cancer cells are most likely to evolve some form of resistance to the bacterial treatment. However, being a living organism, bacteria would coevolve with tumor cells, potentially eliminating the possibility of resistance.[116]

Since bacteria prefer an anoxic environment, they are not efficient at eliminating cells on the periphery of the tumor, where oxygen supply is efficient. A combination of bacterial treatment with chemical drugs will increase chances of destroying the tumor.[116]

Oncolytic viruses are engineered to infect cancerous cells. Limitations of that method include immune response to the virus and the possibility of the virus evolving into a pathogen.[115]

By manipulating the tumor environment, it is possible to create favorable conditions for the cells with least resistance to chemotherapy drugs to become more fit and outcompete the rest of the population. The chemotherapy, administered directly after, should wipe out the predominant tumor cells.[115]

Mapping between common terms from cancer biology and evolutionary biology:

Read this article:
Somatic evolution in cancer - Wikipedia

Human Induced Pluripotent Stem Cells | ATCC

Induced pluripotent stem cells (iPSCs) provide a powerful starting material to model human disease in relevant cell types. iPSCs may be generated from patients of any genetic background and possess the capacity to differentiate into almost any desired terminal cell type.

Although additional investigation is needed, researchers are beginning to focus on the potential utility of iPSCs as a tool for drug development, modeling of disease, and transplantation medicine.

Using ATCCs complete feeder- and xeno-free culture systems, researchers can generate standardized, quality controlled, and highly characterized human iPSCs lines. ATCCs iPSCs are derived by episomal, retroviral, or Sendai viral reprogramming. After gaining pluripotent status, the iPSCs may then be induced to differentiate into many cell types. These cells are valuable materials in the study of differentiation, tissue repair, disease pathogenesis, and drug discovery and development.

ATCC is a licensee of iPS Academia Japans induced pluripotent stem (iPS) cell patent portfolio and is able to bring complete cell culturing solutions for iPSCs to the research community.

ATCC iPSCs are tested for pluripotency, karyotype, growth potential, and sample purity. These authenticated materials are backed by meticulous quality control procedures, making them ideal as reference standards for physiologically relevant in vitro research.

View post:
Human Induced Pluripotent Stem Cells | ATCC

Stem Cell Transplant for Acute Myeloid Leukemia (AML)

The doses of chemotherapy drugs that doctors can give to treat acute myeloid leukemia (AML) are limited by the serious side effects they can cause. Even though higher doses of these drugs might kill more cancer cells, they cant be given because they could severely damage the bone marrow, which is where new blood cells are formed. This could lead to life-threatening infections, bleeding, and other problems caused by low blood cell counts.

Doctors can sometimes use a stem cell transplant (SCT), also called a bone marrow transplant,to give higher doses of chemotherapy than could normally be given. (Sometimes radiation therapy is given as well.) After the treatment is finished, the patient gets an infusion of blood-forming stem cells to restore their bone marrow.

The blood-forming stem cells used for a transplant can come either from blood or from bone marrow. Sometimes stem cells from a babys umbilical cord blood are used.

Stem cell transplants differ based on whom the blood-forming stem cells come from.

This is the most common type of SCT used to treat AML. In an allogeneic SCT, the stem cells come from someone other than the patient usually a donor whose tissue type (also known as the HLA type) closely matches the patients. Tissue type is based on certain substances on the surface of cells in the body. Differences in HLA types between the stem cell donor and recipient can cause the body's immune system to react against the cells. Therefore, the closer a tissue match is between the donor and the recipient, the better the chance the transplanted cells will take and begin making new blood cells.

The best donor is often a close relative, such as a brother or sister, if they are a good match. If no close relatives match, stem cells might be available from a matched unrelated donor (MUD), an unrelated volunteer whose tissue type matches that of the patient. But the use of stem cells from a MUD is linked to more complications. Sometimes umbilical cord stem cells are used. These stem cells come from blood drained from the umbilical cord and placenta after a baby is born and the umbilical cord is cut.

For most patients with AML, especially those at higher risk of having the leukemia return after treatment, using an allogeneic SCT is preferred over an autologous SCT (see below). Leukemia is a disease of the blood and bone marrow, so giving the patient their own cells back after treatment may mean giving them back some leukemia cells as well. Donor cells are also helpful because of the graft-versus-leukemia effect. When the donor immune cells are infused into the body, they may recognize any remaining leukemia cells as being foreign to them and attack them. This effect doesnt happen with autologous stem cell transplants.

Allogeneic transplants can have serious risks and side effects, so patients typically need to be younger and relatively healthy to be good candidates. Another challenge is that it can sometimes be difficult to find a matched donor.

One of the most serious complications of allogeneic SCTs is known as graft-versus-host disease (GVHD). It happens when the patients immune system is taken over by that of the donor. When this happens, the donor immune system may see the patients own body tissues as foreign and attack them.

Symptoms can include severe skin rashes, itching, mouth sores (which can affect eating), nausea, and severe diarrhea. Liver damage can cause yellowing of the skin and eyes (jaundice). The lungs can also be damaged. The patient may also become easily fatigued and develop muscle aches. Sometimes GVHD can become disabling, and if it's severe enough, it can be life-threatening. Drugs that affect the immune system may be given to try to control it.

Non-myeloablative transplant (mini-transplant): Many older people cant tolerate a standard allogeneic transplant that uses high doses of chemo. Some may still be able to get a non-myeloablative transplant (also known as a mini-transplant or reduced-intensity transplant), where they get lower doses of chemo and radiation that dont completely destroy the cells in their bone marrow. They then get the allogeneic (donor) stem cells. These cells enter the body and establish a new immune system, which sees the leukemia cells as foreign and attacks them (a graft-versus-leukemia effect).

A non-myeloablative transplant can still sometimes work with much less toxicity. In fact, a patient can get the transplant as an outpatient. The major complication is graft-versus-host disease.

Many doctors still consider this an experimental procedure for AML, and it is being studied to determine how useful it may be.

In an autologous transplant, a patients own stem cells are removed from their bone marrow or blood. They are frozen and stored while the person gets treatment (high-dose chemotherapy and/or radiation). In the lab, a process called purging may be used to try to remove any leukemia cells in the samples. The stem cells are then put back (reinfused) into the patients blood after treatment.

Autologous transplants are sometimes used for people with AML who are in remission after initial treatment and who dont have a matched donor for an allogeneic transplant. Some doctors feel that it is better than standard consolidation chemotherapy (see Typical Treatment of Acute Myeloid Leukemia (AML)) for these people, but not all doctors agree with this.

Autologous transplants are generally easier for patients to tolerate than allogeneic transplants, because they are getting their own cells back, which lowers the risk of some complications. But the high-dose chemo can still cause major side effects. This type of transplant can be done in any otherwise healthy person, although patients who are very old or have other health problems might not be suitable.

One problem with autologous transplants is that its hard to separate normal stem cells from leukemia cells in the bone marrow or blood samples. Even after purging (treating the stem cells in the lab to try to kill or remove any remaining leukemia cells), there is the risk of returning some leukemia cells with the stem cell transplant.

Read more:
Stem Cell Transplant for Acute Myeloid Leukemia (AML)

Guidelines International Society for Stem Cell Research

Academy of Medical Sciences (2011). Animals containing human material. http://www.acmedsci.ac.uk/policy/policy-projects/animals-containing-human-material/

American College of Obstetricians and Gynecologists (2006). Using preimplantation embryos for research. ACOG Committee Opinion No. 347. Obstet. Gynecol. 108, 13051317.

Bacman, S., Williams, S., Pinto, M. et al. Specific elimination of mutant mitochondrial genomes in patient-derived cells by mitoTALENs. Nat Med 19, 11111113 (2013). https://doi.org/10.1038/nm.3261

Bacman SR, Kauppila JHK, Pereira CV, et al. MitoTALEN reduces mutant mtDNA load and restores tRNAAla levels in a mouse model of heteroplasmic mtDNA mutation [published correction appears in Nat Med. 2018 Oct 5;:]. Nat Med. 2018;24(11):16961700. doi:10.1038/s41591-018-0166-8

Benjaminy S, Kowal SP, MacDonald IM, Bubela T. Communicating the promise for ocular gene therapies: challenges and recommendations. Am J Ophthalmol. 2015 Sep;160(3):408-415.e2. doi: 10.1016/j.ajo.2015.05.026. Epub 2015 May 30. PMID: 26032192.

Boer, G. J. (1994). Ethical guidelines for the use of human embryonic or fetal tissue for experimental and clinical neurotransplantation and research. Journal of Neurology 242, 113.

Boutron, I., Dutton, S., Ravaud, P., and Altman, D.G. (2010). Reporting and interpretation of randomized controlled trials with statistically nonsignificant results for primary outcomes. JAMA 303, 2058-2064.

Bubela T, McCabe C, Archibald P, Atkins H, Bradshaw SE, Kefalas P, Mujoomdar M, Packer C, Piret J, Raxworthy M, Soares M, Viswanathan S. Bringing regenerative medicines to the clinic: the future for regulation and reimbursement. Regen Med. 2015;10(7):897-911. doi: 10.2217/rme.15.51. Epub 2015 Nov 13. PMID: 26565607.

Camacho, L.H., Bacik, J., Cheung, A., and Spriggs, D.R. (2005). Presentation and subsequent publication rates of phase I oncology clinical trials. Cancer 104, 1497-1504.

Costa-Borges, N., Nikitos, E., Spath, K. et al. (2020) First registered pilot trial to validate the safety and effectiveness of maternal spindle transfer to overcome infertility associated with poor oocyte quality. Fertility & Sterility (Abstract only) 114, issue 3, supplement , e71-e72 https://doi.org/10.1016/j.fertnstert.2020.08.220

Council for International Organizations of Medical Sciences (2016). International Ethical Guidelines for Health-related Research Involving Humans. https://cioms.ch/wp-content/uploads/2017/01/WEB-CIOMS-EthicalGuidelines.pdf

Department of Health, and Education and Welfare (1979). Report of the National Commission for the Protection of Human Subjects of Biomedical and Behavioral Research (The Belmont Report). 44 Fed. Reg. 23, 192.

ESHRE Taskforce on Ethics and Law (2001). The moral status of the pre-implantation embryo. Hum. Reprod. 17, 1409-1419.

Easson EC, Russell MH. Cure of Hodgkins disease. BMJ. 1963;5347:17047.

Ethics Committee of American Society for Reproductive Medicine (2013). Donating embryos for human embryonic stem cell (hESC) research: a committee opinion. Fertil. Steril. 100, 935-939.

European Parliament and Council of the European Union (2001). Directive 2001/20/EC of the European Parliament and of the Council of 4 April 2001 on the approximation of the laws, regulations and administrative provisions of the Member States relating to the implementation of good clinical practice in the conduct of clinical trials on medicinal products for human use. (Official Journal of the European Union).

European Science Foundation (2000). Good scientific practice in research and scholarship. Science Policy Briefing. http://www.esf.org/fileadmin/Public_documents/Publications/ESPB10.pdf

Fisher, M., Feuerstein, G., Howells, D.W., Hurn, P.D., Kent, T.A., Savitz, S.I., and Lo, E.H. (2009). Update of the stroke therapy academic industry roundtable preclinical recommendations. Stroke 40, 2244-2250.

Flory, J., and Emanuel, E. (2004). Interventions to improve research participants' understanding in informed consent for research: a systematic review. JAMA 292, 1593-1601.

Food and Drug Administration (2017). FDA Announces Comprehensive Regenerative Medicine Policy Framework. https://www.fda.gov/news-events/press-announcements/fda-announces-comprehensive-regenerative-medicine-policy-framework

Freeman, G.A., and Kimmelman, J. (2012). Publication and reporting conduct for pharmacodynamic analyses of tumor tissue in early-phase oncology trials. Clinical Cancer Research 18, 6478-6484.

Frei, E. 3rd & Gehan, E. A. Definition of cure for Hodgkins disease. Cancer Res. 31, 18281833 (1971).

Fung M, Yuan Y, Atkins H, Shi Q, Bubela T. Responsible Translation of Stem Cell Research: An Assessment of Clinical Trial Registration and Publications. Stem Cell Reports. 2017 May 9;8(5):1190-1201. doi: 10.1016/j.stemcr.2017.03.013. Epub 2017 Apr 13. PMID: 28416287; PMCID: PMC5425617.

Haimes, E., Skene, L., Ballantyne, A.J., Caulfield, T., Goldstein, L.S., Hyun, I., Kimmelman, J., Robert, J.S., Roxland, B.E., Scott, C.T., et al. (2013). Position statement on the provision and procurement of human eggs for stem cell research. Cell Stem Cell 12, 285-291.

Henderson, V.C., Kimmelman, J., Fergusson, D., Grimshaw, J.M., and Hackam, D.G. (2013). Threats to validity in the design and conduct of preclinical efficacy studies: a systematic review of guidelines for in vivo animal experiments. PLoS Medicine 10, e1001489.

Hudson, G., Takeda, Y. & Herbert, M. Reversion after replacement of mitochondrial DNA. Nature 574, E8E11 (2019). https://doi.org/10.1038/s41586-019-1623-3

Human Fertilization and Embryology Authority (2016). Scientific review of the safety and efficacy of methods to avoid mitochondrial disease through assisted conception: 2016 update. https://www.hfea.gov.uk/media/2611/fourth_scientific_review_mitochondria_2016.pdf

Human Fertilization and Embryology Authority (2019). Code of Practice, 9th Edition. https://portal.hfea.gov.uk/media/1527/2019-12-16-code-of-practice-9th-edition-december-2019.pdf

Hyslop LA, Blakeley P, Craven L, Richardson J, Fogarty NM, Fragouli E, Lamb M, Wamaitha SE, Prathalingam N, Zhang Q, OKeefe H. Towards clinical application of pronuclear transfer to prevent mitochondrial DNA disease. Nature. 2016 Jun 8 534: 383-386.

Hyun, I. (2013). Therapeutic hope, spiritual distress, and the problem of stem cell tourism. Cell Stem Cell12, 505-507.

Hyun, I., Taylor, P., Testa, G., Dickens, B., Jung, K. W., McNab, A., Roberston, J., Skene, L., and Zoloth, L. (2007). Ethical standards for human-to-animal chimera experiments in stem cell research. Cell Stem Cell 1, 159163.

International Society for Stem Cell Research (ISSCR). (2006). Guidelines for the conduct of human embryonic stem cell research. http://www.isscr.org/docs/default-source/hesc-guidelines/isscrhescguidelines2006.pdf.

International Society for Stem Cell Research (ISSCR). (2008). Guidelines for the clinical translation of stem cells. http://www.isscr.org/docs/default-source/clin-trans-guidelines/isscrglclinicaltrans.pdf.

International Society for Stem Cell Research (ISSCR). (2016). Guidelines for Stem Cell Research and Clinical Translation. https://www.isscr.org/docs/default-source/all-isscr-guidelines/guidelines-2016/isscr-guidelines-for-stem-cell-research-and-clinical-translationd67119731dff6ddbb37cff0000940c19.pdf?sfvrsn=4

Madan K. Natural human chimeras: A review. Eur J Med Genet. 2020 Sep;63(9):103971. doi: 10.1016/j.ejmg.2020.103971. Epub 2020 Jun 18. PMID: 32565253.

National Academy of Sciences, National Academy of Engineering, and Institute of Medicine. 2009. On Being a Scientist: A Guide to Responsible Conduct in Research: Third Edition. Washington, DC: The National Academies Press. https://doi.org/10.17226/12192.

National Academy of Medicine, National Academy of Sciences, and the Royal Society. 2020. Heritable Human Genome Editing. Washington, DC.: The National Academies Press. doi: 10.17226/25665.

Institute of Medicine (2015). Sharing Clinical Trial Data: Maximizing Benefits, Minimizing Risks (Washington, DC: National Academies Press). doi:10.17226/18998.

Nuffield Council on Bioethics. 2016. Genome Editing: An Ethical Review. https://www.nuffieldbioethics.org/wp-content/uploads/Genome-editing-an-ethical-review.pdf

Institute of Medicine and National Research Council. 2010. Final Report of the National Academies' Human Embryonic Stem Cell Research Advisory Committee and 2010 Amendments to the National Academies' Guidelines for Human Embryonic Stem Cell Research. Washington, DC: The National Academies Press. https://doi.org/10.17226/12923.

Kamenova, K., and Caulfield, T. (2015). Stem cell hype: media portrayal of therapy translation. Science Translational Medicine 7, 278ps274.

Kang, E., Koski, A., Amato, P. et al. Reply to: Reversion after replacement of mitochondrial DNA. Nature 574, E12E13 (2019). https://doi.org/10.1038/s41586-019-1624-2

Kang E, Wu J, Gutierrez NM, Koski A, Tippner-Hedges R, Agaronyan K, Platero-Luengo A, Martinez-Redondo P, Ma H, Lee Y, Hayama T, Van Dyken C, Wang X, Luo S, Ahmed R, Li Y, Ji D, Kayali R, Cinnioglu C, Olson S, Jensen J, Battaglia D, Lee D, Wu D, Huang T, Wolf DP, Temiakov D, Izpisua Belmonte JC, Amato P, Mitalipov S. Mitochondrial replacement in human oocytes carrying pathogenic mitochondrial DNA mutations. Nature 2016 DOI: 10.1038/nature20592

Kilkenny C, Browne WJ, Cuthill IC, Emerson M, and Altman DG (2010). Improving bioscience research reporting: the ARRIVE guidelines for reporting animal research. Plos Biol 8, e1000412.

Kimmelman, J., Mogil, J.S., Dirnagl, U. (2014). Distinguishing between Exploratory and Confirmatory Preclinical Research Will Improve Translation. PLoS Biol. 12, e1001863.

Kuriyan AE, Albini TA, Townsend JH, et al. Vision Loss after Intravitreal Injection of Autologous "Stem Cells" for AMD. N Engl J Med. 2017; 376(11):10471053. doi:10.1056/NEJMoa1609583

Landis, S.C., Amara, S.G., Asadullah, K., Austin, C.P., Blumenstein, R., Bradley, E.W., Crystal, R.G., Darnell, R.B., Ferrante, R.J., Fillit, H., et al. (2012). A call for transparent reporting to optimize the predictive value of preclinical research. Nature 490, 187-191.

Lau, D., Ogbogu, U., Taylor, B., Stafinski, T., Menon, D., and Caulfield, T. (2008). Stem cell clinics online: the direct-to-consumer portrayal of stem cell medicine. Cell Stem Cell 3, 591-594.

Mazur, P et al. 2019 P-221 Mitochondrial Replacement Therapy Gives No Benefits to Patients of Advanced Maternal Age. Paper presented to ASRM Scientific Conference and Expo, Philadelphia, Oct. 14-16. https://asrm.confex.com/asrm/2019/meetingapp.cgi/Paper/2347

Medical Professionalism Project (2002). Medical professionalism in the new millennium: a physician charter. Annals of Internal medicine 136, 243-246.

Munsie, M., and Hyun, I. (2014). A question of ethics: selling autologous stem cell therapies flaunts professional standards. Stem Cell Research 13, 647-653.

National Academies of Sciences, Engineering, and Medicine (2016). Mitochondrial Replacement Techniques: Ethical, Social, and Policy Considerations. (Washington, DC: The National Academies Press). doi:10.17226/21871.

National Institutes of Health (2014). Informed Consent Guidance for Human Gene Trials subject to the NIH Guidelines for Research Involving Recombinant or Synthetic Nucleic Acid Molecules (Office of Science Policy: Office of Biotechnology Activities). http://osp.od.nih.gov/sites/default/files/resources/IC2013.pdf

Nissanka N, Moraes CT. Mitochondrial DNA heteroplasmy in disease and targeted nuclease-based therapeutic approaches. EMBO Rep. 2020;21(3):e49612. doi:10.15252/embr.201949612

Nuremberg Code (1949). In Trials of War Criminals before the Nuremberg Military Tribunals under Control Council Law No 10, Vol 2 (Washington, DC: U.S. Government Printing Office), pp 181-182.

Office for Human Research Protections (OHRP) (1993). Research on Transplantation of Fetal Tissue SEC. 498A, National Institutes of Health Revitalization Act of 1993. http://www.hhs.gov/ohrp/policy/publiclaw103-43.htm.html

Percie du Sert N, Hurst V, Ahluwalia A, Alam S, Avey MT, Baker M, et al. (2020) The ARRIVE guidelines 2.0: Updated guidelines for reporting animal research. PLoS Biol 18(7): e3000410. https://doi.org/10.1371/journal.pbio.3000410

Ravi, P., Kumar, S.K., Cerhan, J.R. et al. Defining cure in multiple myeloma: a comparative study of outcomes of young individuals with myeloma and curable hematologic malignancies. Blood Cancer Journal 8, 26 (2018). https://doi.org/10.1038/s41408-018-0065-8:

Reddy, Pradeep et al. Selective Elimination of Mitochondrial Mutations in the Germline by Genome Editing. Cell, Volume 161, Issue 3 (2015) pp. 459 469. https://doi.org/10.1016/j.cell.2015.03.051

Saini, P., Loke, Y.K., Gamble, C., Altman, D.G., Williamson, P.R., and Kirkham, J.J. (2014). Selective reporting bias of harm outcomes within studies: findings from a cohort of systematic reviews. BMJ 349, g6501.

SB-180 Gene therapy kits: advisory notice and labels.(2019-2020). California State Legislature.

S.D. Tardif, K. Coleman, T.R. Hobbs, C. Lutz, IACUC Review of Nonhuman Primate Research, ILAR Journal 53, no. 2, 2013: DOI: 10.1093/ilar/ilt040.

Sena, E.S., van der Worp, H.B., Bath, P.M., Howells, D.W., and Macleod, M.R. (2010). Publication bias in reports of animal stroke studies leads to major overstatement of efficacy. PLoS Biol. 8, e1000344.

Sugarman J, Siegel A. How to determine whether existing human embryonic stem cell lines can be used ethically. Cell Stem Cell 2008; 3: 238-9. PMID: 18786411.

Sugarman J, Siegel AW. When embryonic stem cell lines fail to meet consent standards. Science 2008; 322: 379. PMID: 18927375.

Tsilidis, K.K., Panagiotou, O.A., Sena, E.S., Aretouli, E., Evangelou, E., Howells, D.W., Al-Shahi Salman. R., Macleod, M.R., Ioannidis, J.P. (2013). Evaluation of excess significance bias in animal studies of neurological diseases. PLoS Biol. 11, e1001609.

U.K. Department of Health (2014). Mitochondrial donation. Government response to the consultation on draft regulations to permit the use of new treatment techniques to prevent the transmission of a serious mitochondrial disease from mother to child. https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/332881/Consultation_response.pdf

Wang, Tian et al. Polar Body Genome Transfer for Preventing the Transmission of Inherited Mitochondrial Diseases. Cell, 157 (2014), pp. 1591-1604. https://doi.org/10.1016/j.cell.2014.04.042

World Medical Association (2018). Declaration of Helsinki: Ethical principles for medical research involving human subjects. https://www.wma.net/policies-post/wma-declaration-of-helsinki-ethical-principles-for-medical-research-involving-human-subjects/

Wu, K., Zhong, C., Chen, T. et al. Polar bodies are efficient donors for reconstruction of human embryos for potential mitochondrial replacement therapy. Cell Res 27, 10691072 (2017). https://doi.org/10.1038/cr.2017.67

Yamada M, Emmanuele V, Sanchez-Quintero MJ, Sun B, Lallos G, Paull D, Zimmer M, Pagett S, Prosser RW, Sauer MV, Hirano M. Genetic Drift Can Compromise Mitochondrial Replacement by Nuclear Transfer in Human Oocytes. Cell stem cell. 2016 Jun 2;18(6):749-54.

Zhang, John et al. Pregnancy derived from human zygote pronuclear transfer in a patient who had arrested embryos after IVF. Reproductive biomedicine online vol. 33,4 (2016): 529-533. doi:10.1016/j.rbmo.2016.07.008

Read more:
Guidelines International Society for Stem Cell Research

People | Faculty of Engineering and Physical Sciences – University of Leeds

Abas Prades Sonia S.AbasPrades@leeds.ac.uk Research Fellow Abbas Noorhan +44(0)113 343 0084 N.H.Abbas@leeds.ac.uk Research & Teaching Fellow Abiri Jahromi Amir A.AbiriJahromi@leeds.ac.uk Lecturer in Smart Energy Systems Aboelazayem Omar O.Aboelazayem@leeds.ac.uk Research Fellow in Advanced Biofuels Actis Paolo +44(0)113 343 4625 P.Actis@leeds.ac.uk Associate Professor of Bio-nanotechnology Adam-Day Bea B.Adam-Day@leeds.ac.uk Postgraduate Researcher Adams Peter +44(0)113 343 9718 P.G.Adams@leeds.ac.uk Associate Professor Adesanya Elijah E.D.Adesanya@leeds.ac.uk Visiting Research Fellow Adler Isolde +44(0)113 343 6819 I.M.Adler@leeds.ac.uk Associate Professor Adu-Amankwah Samuel +44(0)113 343 2304 S.Adu-Amankwah@leeds.ac.uk Lecturer in Civil Engineering Agboh Wisdom W.C.Agboh@leeds.ac.uk EPSRC Doctoral Prize Fellow Aivaliotis Georgios +44(0)113 343 5162 G.Aivaliotis@leeds.ac.uk Lecturer Al Arefi Salma S.Alarefi@leeds.ac.uk Teaching Fellow Al-Hajjar Mazen +44(0)113 343 9401 M.Al-Hajjar@leeds.ac.uk Visiting Research Fellow Al-Sayaghi Maram M.Al-Sayaghi@leeds.ac.uk Experimental Support Officer Alazmani Ali +44(0)113 343 2178 A.Alazmani@leeds.ac.uk University Academic Fellow Aldred Josephine +44(0)113 343 5837 J.Aldred@leeds.ac.uk Marketing Manager Aldridge Matthew M.Aldridge@leeds.ac.uk Lecturer Ali Mannan +44(0)113 343 3833 M.Ali2@leeds.ac.uk Experimental Officer Ali Sharib S.S.Ali@leeds.ac.uk Lecturer Alsalka Mhd Ammar +44(0)113 343 1142 M.A.Alsalka@leeds.ac.uk Lecturer in Computing Altahhan Abdulrahman +44(0)113 343 1310 A.Altahhan@leeds.ac.uk Senior Teaching Fellow in Artificial Intelligence Alves Thorne Karine +44(0)113 343 5533 K.I.AlvesThorne@leeds.ac.uk Trainee Technician Amsdon Timothy +44(0)113 343 4800 T.J.Amsdon@leeds.ac.uk Lecturer (Assistant Professor) Anamari Mohandas Reshma R.AnamariMohandas@leeds.ac.uk Research Fellow Andrews Gordon +44(0)113 343 2493 G.E.Andrews@leeds.ac.uk Professor Anquandah Jason J.S.Anquandah@leeds.ac.uk Tutorial Assistant Ansell Richard +44(0)113 343 6415 R.J.Ansell@leeds.ac.uk Senior Lecturer Antony Joseph +44(0)113 343 2409 S.J.Antony@leeds.ac.uk Associate Professor Arkless Leslie +44(0)113 343 2309 L.Arkless@leeds.ac.uk Analytical Technician in Microstructure Materials Characterisati Armstrong Chris +44(0)113 343 2046 C.J.Armstrong@leeds.ac.uk Student Education Service Officer Arrowsmith Rachel R.Arrowsmith@leeds.ac.uk Student Ed Service Officer (Admissions) Asachi Maryam M.Asachi@leeds.ac.uk Lecturer in Water and Environmental Engineering Asaf Mohammed +44(0)113 343 2945 M.Asaf@leeds.ac.uk Technician Aslam Zabeada Z.P.Aslam@leeds.ac.uk Research Officer Aslanyan Vahagn V.Aslanyan@leeds.ac.uk Leverhulme Trust Early Career Fellow Asprey Stuart +44(0)113 343 3296 S.Asprey@leeds.ac.uk CAD/CAM Manufacturing Technician Astoul Aurelie A.A.V.Astoul@leeds.ac.uk Leverhulme Early Career Fellow (postdoctoral researcher) Atai Farrokh F.Atai@leeds.ac.uk Marie Curie Research Fellow Atkins Hayley +44(0)113 343 2080 H.Atkins@leeds.ac.uk Personal Assistant Atkinson Clair +44(0)113 343 7072 C.Atkinson@leeds.ac.uk School Administrative Manager Atwell Eric +44(0)113 343 5761 E.S.Atwell@leeds.ac.uk Professor of Artificial Intelligence for Language Auer Stefan +44(0)113 343 8669 S.Auer@leeds.ac.uk Lecturer Awais Yasar Y.Awais@leeds.ac.uk Senior Teaching Fellow in Architecture Aykroyd Robert +44(0)113 343 5167 R.G.Aykroyd@leeds.ac.uk Senior Lecturer Azam Kamran K.Azam@leeds.ac.uk Lead Technician Azizi Sadegh S.Azizi@leeds.ac.uk Lecturer in Smart Energy Systems Azmi Siddeequah +44(0)113 343 7795 S.M.Azmi@leeds.ac.uk Business Engagement Officer (WRIPA) Babaie Meisam M.Babaie@leeds.ac.uk Lecturer Babatunde Akintunde +44(0)113 343 2743 A.Babatunde@leeds.ac.uk Associate Professor Bacchetti Alistair A.Bacchetti@leeds.ac.uk Visiting Research Assistant Baker Alastair +44(0)113 343 9068 A.R.Baker@leeds.ac.uk Research Associate Baker Daniel D.L.Baker@leeds.ac.uk Experimental Officer Bakr Mustafa M.S.A.Bakr@leeds.ac.uk Visiting Researcher Balazs Boglarka +44(0)113 343 4023 B.N.Balazs@leeds.ac.uk School Administration Officer Baldwin Debra +44(0)113 343 2154 D.A.Baldwin@leeds.ac.uk Administrative Support Officer - iMBE Bale Catherine +44(0)113 343 8250 C.S.E.Bale@leeds.ac.uk Associate Professor Balijepalli Chandra +44(0)113 343 5345 N.C.Balijepalli@leeds.ac.uk Lecturer in Transport Engineering Model Balme Jessica +44(0)113 343 6307 J.M.Balme@leeds.ac.uk Student Education Service Officer Banaie Heravan Fatemeh F.BanaieHeravan@leeds.ac.uk Research Fellow Barber Stuart +44(0)113 343 5146 S.barber@leeds.ac.uk Senior Lecturer in Statistics Barker Joseph +44(0)113 343 3841 J.Barker@leeds.ac.uk Royal Society University Research Fellow Barker Joseph J.Barker2@leeds.ac.uk Research Fellow Barker Adrian +44(0)113 343 5165 A.J.Barker@leeds.ac.uk Associate Professor in Applied Mathematics Barker Richard +44(0)113 343 2206 R.J.Barker@leeds.ac.uk Associate Professor in Corrosion Science and Engineering Barns David D.G.Barns@leeds.ac.uk Research Fellow Barrington Dani +44(0)113 343 6260 D.J.Barrington@leeds.ac.uk Visiting Lecturer in Water, Sanitation & Health Barton David +44(0)113 343 2137 D.C.Barton@leeds.ac.uk Professor Bartram James J.K.Bartram@leeds.ac.uk Professor of Public Health and Environment Basheer Muhammed +44(0)113 343 2272 P.A.M.Basheer@leeds.ac.uk Chair in Structural Engineering Baur Karin K.U.Baur@leeds.ac.uk Professor Bayana Mary +44(0)113 343 6900 M.E.Bayana@leeds.ac.uk Laboratory Manager Bayly Andrew +44(0)113 343 0167 A.E.Bayly@leeds.ac.uk Chair in Chemical Engineering Beadling Rob +44(0)113 343 2135 A.R.Beadling@leeds.ac.uk Teaching & Research Fellow Beales Paul +44(0)113 343 9101 P.A.Beales@leeds.ac.uk Associate Professor Beaume Cedric +44(0)113 343 9916 C.M.L.Beaume@leeds.ac.uk Associate Professor in Applied Mathematics Beddows Angela +44(0)113 343 3855 A.Beddows@leeds.ac.uk Technician Beige Almut +44(0)113 343 3899 A.Beige@leeds.ac.uk Associate Professor Bell Andrew +44(0)113 343 2370 A.J.Bell@leeds.ac.uk Professor Ben Rached Nadhir N.BenRached@leeds.ac.uk Lecturer Bennett Brandon +44(0)113 343 1070 B.Bennett@leeds.ac.uk Lecturer Bernal Lopez Susan S.A.BernalLopez@leeds.ac.uk Professor of Structural Materials Berretta Christian C.Berretta@leeds.ac.uk Lecturer Berry Helen +44(0)113 343 5617 H.E.Berry@leeds.ac.uk University Academic Fellow Besharat Mohsen M.Besharat@leeds.ac.uk Lecturer (Assistant Professor) Bettadapura Subramanyam Shashank S.BettadapuraSubramanyam@leeds.ac.uk Marie Curie Research Fellow Bhat Pallavi P.Bhat@leeds.ac.uk Research Fellow Bhogal Gurdev +44(0)113 343 2519 G.S.Bhogal@leeds.ac.uk Research Technician Bilbrough Andrew A.D.Bilbrough@leeds.ac.uk Teaching Support Technician Billeter Markus M.Billeter@leeds.ac.uk Assistant Professor Black Leon +44(0)113 343 2283 L.Black@leeds.ac.uk Professor of Infrastructure Materials Blacker John +44(0)113 343 8239 J.Blacker@leeds.ac.uk Professor Blakeley Ian +44(0)113 343 6472 I.J.Blakeley@leeds.ac.uk Building Manager/Safety Adviser Blitz Mark M.Blitz@leeds.ac.uk Research Fellow Bogachev Leonid +44(0)113 343 4972 L.V.Bogachev@leeds.ac.uk Reader Bokhove Onno +44(0)113 343 9751 O.Bokhove@leeds.ac.uk Chair in Geophysical Fluid Dynamics Bollada Peter +44(0)113 343 2567 P.C.Bollada@leeds.ac.uk Research Fellow Bonner Faith +44(0)113 343 3810 F.R.C.Bonner@leeds.ac.uk Research and Mgmt Suppt Officer Boocock Hardy +44(0)113 343 2134 H.Boocock@leeds.ac.uk Teaching Support Technician Booth Andrew A.Booth@leeds.ac.uk Research Fellow Boral Soumava S.Boral@leeds.ac.uk Research Fellow in Artificial Intelligence (Circular Economy) Borissova Dimitrova Antonia +44(0)113 343 2421 A.Borissova@leeds.ac.uk Teaching Fellow Borman Duncan +44(0)113 343 2354 D.J.Borman@leeds.ac.uk Associate Professor Bourne Richard +44(0)113 343 6547 R.A.Bourne@leeds.ac.uk Professor of Digital Chemical Engineering Boustead Graham G.A.Boustead@leeds.ac.uk Research Fellow Bower Denise +44(0)113 343 2271 D.A.Bower@leeds.ac.uk Professor Boyle Jordan +44(0)113 343 2140 J.H.Boyle@leeds.ac.uk Lectureship in Engineering Systems Bradley Derek +44(0)113 343 2115 D.Bradley@leeds.ac.uk Research Professor Brady David D.J.Brady@leeds.ac.uk Research Project Manager Bray Edward +44(0)113 343 2077 E.P.Bray@leeds.ac.uk Technician Bray Nicky +44(0)113 343 9934 N.J.Bray@leeds.ac.uk Team Challenge Administrator Brennan Jessica +44(0)113 343 0075 J.M.Brennan@leeds.ac.uk Project Manager Bressloff Neil N.Bressloff@leeds.ac.uk Professor of Biomedical Engineering & Design Brickwood Alan +44(0)113 343 2224 A.L.Brickwood@leeds.ac.uk Formula Car Support Technician Brindley John +44(0)113 343 5134 J.Brindley@leeds.ac.uk Research Professor Brine Alison +44(0)113 343 2262 A.E.Brine@leeds.ac.uk Education Service Officer Briscoe Adam A.B.Briscoe@leeds.ac.uk Visiting Research Fellow Britton Andrew A.Britton@leeds.ac.uk Research Officer Broadbent Matthew +44(0)113 343 2942 M.Broadbent@leeds.ac.uk Mechanical Workshop Technician Brockett Claire +44(0)113 343 7472 C.L.Brockett@leeds.ac.uk Associate Professor of Biomechanical Engineering Brooke-Taylor Andrew +44(0)113 343 7101 A.D.Brooke-Taylor@leeds.ac.uk Associate Professor Brookes Amy A.Brookes@leeds.ac.uk Research Development Support Officer Brooks Peter +44(0)113 343 2122 P.C.Brooks@leeds.ac.uk Associate Professor Brown Aaron A.E.Brown@leeds.ac.uk EPSRC Doctoral Prize Fellow Brown Graham +44(0)113 343 8264 G.Brown@leeds.ac.uk Mechanical Services Manager Brown Andy +44(0)113 343 2382 A.P.Brown@leeds.ac.uk Professor of Materials Characterisation Brunk Rebecca R.L.Brunk@leeds.ac.uk Research Fellow Bryan-Kinns Emily +44(0)113 343 6937 E.Bryan-Kinns@leeds.ac.uk CDT Administration Officer Bryant Michael +44(0)113 343 2161 M.G.Bryant@leeds.ac.uk Associate Professor Buckley Matthew +44(0)113 343 2134 M.W.Buckley@leeds.ac.uk Senior Electronics Technician Bukhari-Bibi Ruksana +44(0)113 343 6788 R.Bukhari-Bibi@leeds.ac.uk Education Service Assistant Bulman Christopher C.A.Bulman@leeds.ac.uk Analytical Technician Bulpitt Andy +44(0)113 343 6816 A.J.Bulpitt@leeds.ac.uk Professor of Computer Science Burdon Samuel +44(0)113 343 9133 S.G.Burdon@leeds.ac.uk Research Support Technician Burnell Gavin +44(0)113 343 3843 G.Burnell@leeds.ac.uk Associate Professor of Condensed Matter Physics Burnett Jordan J.Burnett1@leeds.ac.uk Technician Burnett Andrew +44(0)113 343 0997 A.D.Burnett@leeds.ac.uk Associate Professor Burns Zoe +44(0)113 343 6331 Z.S.Burns@leeds.ac.uk Education Service Officer / Receptionist Burton Isobel +44(0)113 343 3860 I.R.Burton@leeds.ac.uk Education Service Officer Bushby Richard +44(0)113 343 6509 R.J.Bushby@leeds.ac.uk Research Professor Byrne Michelle +44(0)113 343 2113 M.Byrne@leeds.ac.uk Administrative Support Officer - iDRO Califano Marco +44(0)113 343 2088 M.Califano@leeds.ac.uk Associate professor Callaghan Martin +44(0)113 343 0273 M.Callaghan@leeds.ac.uk Lecturer Campbell Anya A.Campbell1@leeds.ac.uk Education Service Officer (Admissions) Cardie Jane +44(0)113 343 2171 J.E.Cardie@leeds.ac.uk Technician Carney John +44(0)113 343 2022 j.a.carney@leeds.ac.uk Faculty Research Manager Carpenter Thomas T.Carpenter@leeds.ac.uk Visitor (Research) Carr Hamish +44(0)113 343 7042 H.Carr@leeds.ac.uk Professor of Computer Science Cassidy Tyler T.Cassidy1@leeds.ac.uk Lecturer in Mathematical Biology Caudrelier Vincent +44(0)113 343 9522 V.Caudrelier@leeds.ac.uk Lecturer in Mathematical Physics Cayre Olivier +44(0)113 343 4939 O.J.Cayre@leeds.ac.uk Associate Professor (Academic) Cespedes Oscar +44(0)113 343 1885 O.Cespedes@leeds.ac.uk Professor of Condensed Matter Physics Chakhlevitch Natasha Shakhlevich +44(0)113 343 5444 N.Shakhlevich@leeds.ac.uk Senior Lecturer Chalykh Oleg +44(0)113 343 5112 O.Chalykh@leeds.ac.uk Lecturer Chamberlain Thomas +44(0)113 343 6468 T.W.Chamberlain@leeds.ac.uk Associate Professor Chambers Anthony A.Chambers@leeds.ac.uk Student Education Service Assistant Chandler James J.H.Chandler@leeds.ac.uk Lecturer in Surgical Robotics Chapman David D.W.Chapman@leeds.ac.uk Technician Chau Hau Hing +44(0)113 343 2111 H.H.Chau@leeds.ac.uk Research Fellow Chau Chalmers C.C.Chau@leeds.ac.uk Research Fellow Chen Li +44(0)113 343 5215 L.Chen@leeds.ac.uk Experimental Officer Chen Xiaohui +44(0)113 343 0350 X.Chen@leeds.ac.uk Associate Professor in Geotechnical Engineering Chester Nick +44(0)113 343 0929 N.J.Chester@leeds.ac.uk Reporting Officer in Medical Technology Childs Tom +44(0)113 343 2207 T.H.C.Childs@leeds.ac.uk Emeritus Professor Chittenden Richard +44(0)113 343 2176 R.J.Chittenden@leeds.ac.uk Teaching Fellow Chong Benjamin +44(0)113 343 9091 B.Chong@leeds.ac.uk Lecturer Choudhry Omar O.Choudhry@leeds.ac.uk Teaching Assistant Choudhury Charisma +44(0)113 343 2659 C.F.Choudhury@leeds.ac.uk Chair in Behaviour Modelling Chowney Steven S.J.Chowney@leeds.ac.uk Stores Technician Christie Jessica +44(0)113 343 0794 J.R.Christie@leeds.ac.uk Student Education Service Functional Manager (Student Support) Chuang HsiaoHan H.G.Chuang@leeds.ac.uk Research associate Clark Kate +44(0)113 343 2118 K.L.Clark@leeds.ac.uk Flexible Learning Officer Clark Laura L.Clark@leeds.ac.uk Marie Curie Research Fellow Clark Amanda +44(0)113 343 3839 A.Clark1@leeds.ac.uk Student Education Service Officer (PGR) Clarke Roland +44(0)113 343 2094 R.G.Clarke@leeds.ac.uk Associate Professor Clarke Robert +44(0)113 343 2277 R.Clarke@leeds.ac.uk Technician Clarke Barry +44(0)113 343 9454 B.G.Clarke@leeds.ac.uk Professor Clarke Kirsty +44(0)113 343 5055 K.J.Clarke@leeds.ac.uk Student Education Service Officer (PGR) Clarke Deborah D.Clarke2@leeds.ac.uk Administrative Support Assistant Clarkson Mandy +44(0)113 343 6451 M.J.Clarkson@leeds.ac.uk School Research Support Officer Clayton Adam A.D.Clayton@leeds.ac.uk University Academic Fellow Cochrane Diane +44(0)113 343 2363 D.Cochrane@leeds.ac.uk Technician Cochrane Robert +44(0)113 343 2359 R.F.Cochrane@leeds.ac.uk Senior Lecturer Cockerill Timothy +44(0)113 343 7678 T.Cockerill@leeds.ac.uk Chair in Efficient Energy Utilisation Cohen Netta +44(0)113 343 6789 N.Cohen@leeds.ac.uk Professor Cohn Anthony +44(0)113 343 5482 A.G.Cohn@leeds.ac.uk Professor of Automated Reasoning Collins Sean S.M.Collins@leeds.ac.uk University Academic Fellow Colombo Marco M.Colombo@leeds.ac.uk Research Fellow Connell Simon +44(0)113 343 8241 S.D.A.Connell@leeds.ac.uk Associate Professor Connolly David +44(0)113 343 6304 D.Connolly@leeds.ac.uk Professor of Railway Engineering Cook Ed E.R.Cook@leeds.ac.uk Research Fellow in Circular Economy Systems for Waste Plastics Cooper Robert +44(0)113 343 9210 R.J.Cooper@leeds.ac.uk KTP Associate Copeland Helen +44(0)113 343 3210 H.O.W.Copeland@leeds.ac.uk Administrative Assistant Correia Benjamin +44(0)113 343 3765 B.Correia@leeds.ac.uk Estates and Fabric Technician Cottom Josh J.W.Cottom@leeds.ac.uk Research Fellow in Plastics Pollution Coupe Jennifer +44(0)113 343 3628 J.A.Coupe@leeds.ac.uk Deputy Employability and Placement Manager Cousens Terry T.W.Cousens@leeds.ac.uk Senior Lecturer Cowell David +44(0)113 343 4965 D.M.J.Cowell@leeds.ac.uk Teaching & Research Fellow Emb Syst/Ultr Cowie Raelene +44(0)113 343 9112 R.Cowie@leeds.ac.uk Research Fellow Critchley Kevin +44(0)113 343 3873 K.Critchley@leeds.ac.uk Associate Professor Critchley Kevin +44(0)113 343 3873 K.Critchley@leeds.ac.uk Associate Professor Culmer Peter +44(0)113 343 2141 P.R.Culmer@leeds.ac.uk Associate Professor Cunliffe Adrian +44(0)113 343 2470 A.M.Cunliffe@leeds.ac.uk Analytical Spport Technician Cunningham John +44(0)113 343 0618 J.E.Cunningham@leeds.ac.uk Professor Cutillo Luisa L.Cutillo@leeds.ac.uk Lecturer in Statistics Dai Sheng +44(0)113 343 0313 S.Dai1@leeds.ac.uk Professor of Chemical Engineering Dang Minh M.T.Dang@leeds.ac.uk Teaching Assistant Danso-Boateng Eric +44(0)113 343 7125 E.Danso-Boateng@leeds.ac.uk Teaching Fellow Dareiotis Konstantinos K.Dareiotis@leeds.ac.uk Lecturer Darwood Kim K.M.Darwood@leeds.ac.uk General Support Assistant and Receptionist Das Chinmay +44(0)113 343 2930 C.Das@leeds.ac.uk Research Fellow Davies Giles +44(0)113 343 7075 G.Davies@leeds.ac.uk Professor Dawson Peter +44(0)113 343 2565 mtlpgd@leeds.ac.uk Technician Dawson David +44(0)113 343 9548 D.A.Dawson@leeds.ac.uk Lecturer in Transport Management & Resilience Day Gavin +44(0)113 343 9402 G.Day1@leeds.ac.uk Research Fellow Day Stephanie +44(0)113 343 8461 S.J.Day@leeds.ac.uk Faculty Office Administrator De Angelis Tiziano +44(0)113 343 0392 T.DeAngelis@leeds.ac.uk Lecturer in Actuarial/Financial Maths de Boer Gregory +44(0)113 343 2607 G.N.deBoer@leeds.ac.uk Lecturer in Aeronautical and Aerospace Engineering de Jong Anna +44(0)113 343 2054 A.deJong@leeds.ac.uk Clerk de Kamps Marc +44(0)113 343 5322 M.deKamps@leeds.ac.uk Lecturer De Leeuw Nora N.H.deLeeuw@leeds.ac.uk Professor of Computational Chemistry De Pennington Alan +44(0)113 343 2207 A.dePennington@leeds.ac.uk Visiting Professor Dean Paul +44(0)113 343 2095 P.Dean@leeds.ac.uk University Research Fellow Dechant Pierre-Philippe P.P.Dechant@leeds.ac.uk Curriculum Redefined Lecturer Deger Aydin A.Deger@leeds.ac.uk Visiting Research Fellow Dehghani-Sanij Abbas +44(0)113 343 2906 A.A.Dehghani-Sanij@leeds.ac.uk Chair in Bio-Mech & Medical Robotics Derks Didi +44(0)113 343 4177 D.Derks@leeds.ac.uk Teaching Fellow in Physical Chemistry Desai Amisha +44(0)113 343 9238 A.Desai@leeds.ac.uk Research Fellow Dhandapani Yuvaraj Y.Dhandapani@leeds.ac.uk Research Fellow in Durability of Cement and Concrete Materials Dickinson Nicola +44(0)113 343 2787 N.H.Dickinson@leeds.ac.uk Finance Officer Dickinson Sara +44(0)113 343 7049 S.D.J.Dickinson@leeds.ac.uk Administrative Support Assistant Dickinson Jennie +44(0)113 343 6522 J.Dickinson@leeds.ac.uk Technician Dillon Nicholas +44(0)113 343 8452 N.Dillon@leeds.ac.uk Senior Research Officer (Post Award) Dimitrova Vania +44(0)113 343 1674 V.G.Dimitrova@leeds.ac.uk Professor of Human-Centred Artificial Intelligence Dixon-Hardy Darron +44(0)113 275 1265 D.W.Dixon-Hardy@leeds.ac.uk Senior Lecturer Djemame Karim +44(0)113 343 6590 K.Djemame@leeds.ac.uk Professor Dogar Mehmet +44(0)113 343 5777 M.R.Dogar@leeds.ac.uk Associate Professor Doidge Fleur +44(0)113 343 2508 F.Doidge@leeds.ac.uk School Administration Manager Doorsamy Wesley W.Doorsamy@leeds.ac.uk Lecturer Dorgham Abdel A.Dorgham@leeds.ac.uk Research Fellow Dougan Lorna +44(0)113 343 8958 L.Dougan@leeds.ac.uk Professor of Physics Douglas Ben +44(0)113 343 2378 B.Douglas@leeds.ac.uk Research Technician Douglas Kevin K.M.Douglas@leeds.ac.uk Research Fellow Drewniok Michal M.P.Drewniok@leeds.ac.uk Research Fellow in Transforming Foundation Industries Drummond-Brydson Rik +44(0)113 343 2369 R.M.Drummond-Brydson@leeds.ac.uk Professor Dubey Shival S.Dubey@leeds.ac.uk Research Fellow in Robotics Duff Gerard G.Duff@leeds.ac.uk Lecturer Duke David +44(0)113 343 6800 D.J.Duke@leeds.ac.uk Professor Emeritus of Computer Science Dupont Valerie +44(0)113 343 2503 V.Dupont@leeds.ac.uk Reader Duxbury Toni +44(0)113 343 2490 T.J.Duxbury@leeds.ac.uk Research Support Officer Dyer Martin +44(0)113 343 5442 M.E.Dyer@leeds.ac.uk Professor Dyer Keith +44(0)113 343 9133 K.Dyer@leeds.ac.uk Research Support Technician Edmonds David +44(0)113 343 2386 D.V.Edmonds@leeds.ac.uk Visiting Professor Edwards Jen +44(0)113 343 3085 J.H.Edwards@leeds.ac.uk University Academic Fellow Efford Nick +44(0)113 343 6809 N.D.Efford@leeds.ac.uk Senior Teaching Fellow Eisele Heribert +44(0)113 343 7074 H.Eisele@leeds.ac.uk Reader Eke Paul P.E.Eke@leeds.ac.uk Royal Academy of Engineering [RAEng] Visiting Professor Eleftheriou Pantelis P.Eleftheriou@leeds.ac.uk University Academic Fellow Elgorashi Taisir T.E.H.Elgorashi@leeds.ac.uk Lecturer in Optical Networks Elliott David +44(0)113 343 9453 D.J.S.Elliott@leeds.ac.uk Technician Ellis Martin Noemy +44(0)113 343 3641 N.EllisMartin@leeds.ac.uk Student Education Service Manager (Programme Support) Elmirghani Jaafar +44(0)113 343 2013 J.M.H.Elmirghani@leeds.ac.uk Head of Institute Elumalai Jayaprasath J.Elumalai@leeds.ac.uk Research Fellow Elwes Richard +44(0)113 343 5864 R.H.Elwes@leeds.ac.uk Senior Teaching Fellow Emery Paul +44(0)113 392 4884 P.Emery@leeds.ac.uk Professor (Clinical) Esat Faye +44(0)113 343 4142 F.Esat@leeds.ac.uk Experimental Officer X-ray Diffraction Espejo Conesa Cayetano +44(0)113 343 9962 C.EspejoConesa@leeds.ac.uk SWJTU Teaching Fellow Etchels Lee +44(0)113 343 6360 L.W.Etchels@leeds.ac.uk Research Fellow Eterovic Sebastian S.Eterovic@leeds.ac.uk Research Fellow Evans Stephen +44(0)113 343 3852 S.D.Evans@leeds.ac.uk Professor Evans Craig +44(0)113 343 4557 C.A.Evans@leeds.ac.uk Associate Professor Evans R M L +44(0)113 343 5861 R.M.L.Evans@leeds.ac.uk Associate Professor Evans Barbara +44(0)113 343 1990 B.E.Evans@leeds.ac.uk Professor of Public Health Engineering Eyley Jenny J.Eyley@leeds.ac.uk Lecturer Faber Eleonore +44(0)113 343 5185 E.M.Faber@leeds.ac.uk Associate Professor Fabiyi Samson S.D.Fabiyi@leeds.ac.uk Transnational Teaching Fellow Fairweather Michael M.Fairweather@leeds.ac.uk Professor Falle Samuel +44(0)113 343 5138 S.A.E.G.Falle@leeds.ac.uk Professor Fang Han H.Fang1@leeds.ac.uk Lecturer in Structural Engineering Fedele Francesca F.Fedele@leeds.ac.uk Research Fellow Fernandes Bruno B.Fernandes@leeds.ac.uk Research Fellow in Durability of Circular Concrete Feroleto Samuel S.Feroleto@leeds.ac.uk Summer Intern Field Sarah S.L.Field@leeds.ac.uk Knowledge Exchange Manager Figueredo Luis L.Figueredo@leeds.ac.uk Marie Curie Fellow Finn Robyn R.Finn@leeds.ac.uk Research Support Technician Finn Adrian A.Finn@leeds.ac.uk Visiting Associate Professor Fisher Quentin +44(0)113 343 1920 Q.J.Fisher@leeds.ac.uk Professor Fisher John +44(0)113 343 2128 J.Fisher@leeds.ac.uk Emeritus Professor Fishwick Colin +44(0)113 343 6510 C.W.G.Fishwick@leeds.ac.uk Professor Fitzgerald Steve +44(0)113 343 4331 S.P.Fitzgerald@leeds.ac.uk Associate Professor Fleming Lauren L.T.Fleming@leeds.ac.uk Research Fellow Fletcher Louise +44(0)113 343 2328 L.A.Fletcher@leeds.ac.uk Lecturer in Environmental Engineering Flint Samuel S.E.Flint@leeds.ac.uk Lead Technician (iTF) Fogarty David +44(0)113 343 6491 D.Fogarty@leeds.ac.uk Technician Fordy Allan +44(0)113 343 5115 A.P.Fordy@leeds.ac.uk Professor Forsyth Helen H.L.Forsyth@leeds.ac.uk CPD, Conference and Events Coordinator Forth John +44(0)113 343 2270 J.P.Forth@leeds.ac.uk Prof of Concrete Engineering & Structure Foster Richard +44(0)113 343 5759 R.Foster@leeds.ac.uk Associate Professor Fox Natalie N.Fox@leeds.ac.uk Senior Research Technician Frame Douglas +44(0)113 343 6587 D.S.Frame@leeds.ac.uk PC Service Leader Francis Charlotte +44(0)113 343 5821 C.Francis@leeds.ac.uk Assistant School Education Service Mger Frangi Alex +44(0)113 343 9640 A.Frangi@leeds.ac.uk Diamond Jubilee Chair in Computational Medicine | Royal Academy Freear Steven +44(0)113 343 2076 S.Freear@leeds.ac.uk Professor of Ultrasonics and Embedded Systems Freeman Helen H.M.Freeman@leeds.ac.uk Network Manager Freeman Joshua +44(0)113 343 8195 J.R.Freeman@leeds.ac.uk Associate Professor Frittaion Emanuele E.Frittaion@leeds.ac.uk Research Fellow in Pure Mathematics Gailani Ahmed A.Gailani@leeds.ac.uk Research Fellow in Industrial Decarbonisation Gale William +44(0)113 343 2796 W.F.Gale@leeds.ac.uk Professor Gallagher Justin J.F.Gallagher@leeds.ac.uk Teaching and Research Fellow Galloway Johanna J.M.Galloway@leeds.ac.uk Post-doctoral Research Associate Garcia-Taengua Emilio +44(0)113 343 0698 E.Garcia-Taengua@leeds.ac.uk Associate Professor in Structures Gardner Sarah +44(0)113 343 3881 S.M.Gardner@leeds.ac.uk Student Education Service Officer (Adm) Garrity Stephen +44(0)113 343 5388 S.W.Garrity@leeds.ac.uk Professor George Midhun M.George@leeds.ac.uk Research Fellow Ghadiri Mojtaba +44(0)113 343 2406 M.Ghadiri@leeds.ac.uk Professor Ghalaii Masoud M.Ghalaii@leeds.ac.uk Research Fellow in Quantum Communications Ghanbarzadeh Ali A.Ghanbarzadeh@leeds.ac.uk Lecturer in Functional Surfaces Gilkeson Carl +44(0)113 343 6915 C.A.Gilkeson@leeds.ac.uk Lecturer in Aerospace Engineering Gilkeson Natalie N.Gilkeson@leeds.ac.uk Teaching Fellow Gleeson Helen +44(0)113 343 3863 H.F.Gleeson@leeds.ac.uk Cavendish Professor of Physics Golshani Shokoufeh S.Golshani@leeds.ac.uk Marie Curie Researcher Goncalves Faria Martins Joao +44(0)113 343 4433 J.FariaMartins@leeds.ac.uk Lecturer in Algebra Gonzalez Montoya Francisco F.GonzalezMontoya@leeds.ac.uk Research Associate Gorman Stephen +44(0)113 343 6512 S.A.Gorman@leeds.ac.uk Laboratory Manager Gorrell Ian I.B.Gorrell@leeds.ac.uk Visiting Research Fellow Gouldson Andy +44(0)113 343 9753 A.Gouldson@leeds.ac.uk Dean: Interdisciplinary Res within CS Graham Emma +44(0)113 343 3804 E.J.Graham@leeds.ac.uk School Administration Manager Grant Rowan +44(0)113 343 0923 R.H.Grant@leeds.ac.uk Communications and Engagement Manager for Medical Technologies Grant-Muller Susan +44(0)113 343 6618 S.M.Grant-Muller@its.leeds.ac.uk Chair in Technologies & Informatics Graves Daniel D.Graves@leeds.ac.uk Teaching Fellow Gray Lucy +44(0)113 343 3086 L.V.Gray@leeds.ac.uk Administrative Support Assistant Green Michael +44(0)113 343 2456 fbsmgr@leeds.ac.uk Technician Greenbank Rachel +44(0)113 343 2302 R.J.Greenbank@leeds.ac.uk Education Service Officer Grieve Peter +44(0)113 343 7276 P.W.Grieve@leeds.ac.uk Technician Griffiths Stephen +44(0)113 343 5186 S.D.Griffiths@leeds.ac.uk Lecturer in applied mathematics Grigorova Miryana M.R.Grigorova@leeds.ac.uk Lecturer in Financial and Actuarial Mathematics Gronqvist Marcus +44(0)113 343 0543 M.N.Gronqvist@leeds.ac.uk Senior Teaching Fellow Guarino Maria Vittoria M.Guarino@leeds.ac.uk Research Fellow Guest Robert +44(0)113 343 2184 R.Guest@leeds.ac.uk Technician Guseva Anna A.Guseva@leeds.ac.uk Marie Curie Research Fellow Gusnanto Arief +44(0)113 343 5135 A.Gusnanto@leeds.ac.uk Associate Professor Hainsworth Tim +44(0)113 343 5163 T.J.Hainsworth@leeds.ac.uk Computer Officer Halcrow Malcolm +44(0)113 343 6506 M.A.Halcrow@leeds.ac.uk Professor Hall Richard M Hall +44(0)113 343 2132 R.M.Hall@leeds.ac.uk Professor Hammersley Camille +44(0)113 343 2190 C.Hammersley@leeds.ac.uk Technician Hammond Robert +44(0)113 343 2428 R.B.Hammond@leeds.ac.uk Lecturer Hanson Bruce +44(0)113 343 0475 B.C.Hanson@leeds.ac.uk Professor Harbottle David +44(0)113 343 4154 D.Harbottle@leeds.ac.uk Associate Professor Hardcastle Thomas T.Hardcastle@leeds.ac.uk KTP Associate Hardie Michaele +44(0)113 343 6458 M.J.Hardie@leeds.ac.uk Professor Harding Dawn +44(0)113 343 2229 D.E.Harding@leeds.ac.uk Education Service Officer Harland Derek +44(0)113 343 5152 D.G.Harland@leeds.ac.uk Associate Professor in Geometry Harlen Oliver +44(0)113 343 5189 O.G.Harlen@leeds.ac.uk Reader Harrington John +44(0)113 343 2559 J.P.Harrington@leeds.ac.uk Facility Manager/Senior Experimental Officer Harris Sarah +44(0)113 343 3816 S.A.Harris@leeds.ac.uk Associate Professor Harris Allen +44(0)113 343 3820 A.Harris@leeds.ac.uk Technician Harris Russell +44(0)113 343 2155 R.Harris@leeds.ac.uk Professor Harris Robert R.I.Harris@leeds.ac.uk Technician Harrison Darren +44(0)113 343 3296 D.R.Harrison@leeds.ac.uk Robotics Manufacturing Technician Hartquist Thomas +44(0)113 343 3885 T.W.Hartquist@leeds.ac.uk Professor Hassanpour Ali +44(0)113 343 2405 A.Hassanpour@leeds.ac.uk Associate Professor Hawksworth Louise +44(0)113 343 6465 L.Hawksworth@leeds.ac.uk School Administrator Hayler Anne +44(0)113 343 2228 A.Hayler@leeds.ac.uk School Education Service Manager Haynes David +44(0)113 343 7907 D.I.Haynes@leeds.ac.uk Senior Administration Assistant Hazlehurst Thomas T.Hazlehurst@leeds.ac.uk Research Fellow Head David +44(0)113 343 4693 D.Head@leeds.ac.uk Lecturer Heard Dwayne +44(0)113 343 6471 D.E.Heard@leeds.ac.uk Professor of Atmospheric Chemistry Heath George G.R.Heath@leeds.ac.uk University Academic Fellow Heggs Peter +44(0)113 343 2386 P.J.Heggs@leeds.ac.uk Visiting Professor Heitor Ana A.Heitor@leeds.ac.uk Lecturer in Geotechnical Engineering Herbert Anthony +44(0)113 343 7371 A.Herbert@leeds.ac.uk Lecturer in Medical and Biological Engineering Herbert Megan M.C.Herbert@leeds.ac.uk Project Manager Heyam Alex A.Heyam@leeds.ac.uk Experimental Officer for NMR Hickey B J +44(0)113 343 3836 B.J.Hickey@leeds.ac.uk Professor Higgins Luke L.J.R.Higgins@leeds.ac.uk EPSRC Doctoral Prize Fellow Hilditch Beth +44(0)113 343 5465 B.A.Hilditch@leeds.ac.uk Education Service Officer Hill Peter +44(0)113 343 8983 P.R.Hill@leeds.ac.uk Pre+Post Award Administrator Hine Peter +44(0)113 343 3827 P.J.Hine@leeds.ac.uk Associate Professor Hiwar Waseem W.F.M.Hiwar@leeds.ac.uk Researcher Hoare Melvin +44(0)113 343 3864 M.G.Hoare@leeds.ac.uk Professor Hobson Susan +44(0)113 343 2070 S.Hobson@leeds.ac.uk Secretary to Institute & PA to Pro Dean Hodges Christopher C.S.Hodges@leeds.ac.uk Research Fellow Hodgson Daniel D.R.E.Hodgson@leeds.ac.uk Demonstrator/Module Assistant Hogg David +44(0)113 343 5765 D.C.Hogg@leeds.ac.uk Professor of Artificial Intelligence Holdsworth Nick +44(0)113 343 1940 N.J.Holdsworth@leeds.ac.uk Faculty Accountant Holdsworth Alex A.Holdsworth1@leeds.ac.uk Apprentice Laboratory Technician Holland Andrew A.D.Holland@leeds.ac.uk Research Fellow in Architectural Heritage and VR Modelling Hollerbach Rainer +44(0)113 343 5134 R.Hollerbach@leeds.ac.uk Professor Hollins Andrew +44(0)113 343 2308 A.T.Hollins@leeds.ac.uk School Education Service Manager Holmes Kimberley +44(0)113 343 6553 K.Holmes@leeds.ac.uk Technician Holmes Stephen +44(0)113 343 8460 S.Holmes@leeds.ac.uk Technician Holroyd Tom +44(0)113 343 2330 T.Holroyd@leeds.ac.uk Education Service Officer Holroyd Sadie S.Holroyd@leeds.ac.uk School Administrative Assistant Holt Raymond +44(0)113 343 7936 R.J.Holt@leeds.ac.uk Lecturer Hondow Nicole +44(0)113 343 2056 N.Hondow@leeds.ac.uk Associate Professor Honore Teresa +44(0)113 343 5222 M.Honore@leeds.ac.uk School Office and Projects Manager Houston Kevin +44(0)113 343 5136 K.Houston@leeds.ac.uk Senior Lecturer Houwing-Duistermaat Jeanne +44(0)113 343 9821 J.Duistermaat@leeds.ac.uk Chair in Data Analytics and Statistics Howling Graeme +44(0)113 343 0908 G.Howling@leeds.ac.uk Technology Manager Hoyle Brian +44(0)113 343 2386 B.S.Hoyle@leeds.ac.uk Visiting Professor Hoz de Vila Eduardo Kattia K.HozdeVila@leeds.ac.uk Research Software Engineer Huang Wengui W.Huang@leeds.ac.uk Research Fellow Huang Yanlong +44(0)113 343 3505 Y.L.Huang@leeds.ac.uk University Academic Fellow Huerta Omar O.I.HuertaCardoso@leeds.ac.uk Lecturer Huggan Michael +44(0)113 343 2196 M.Huggan@leeds.ac.uk Technician Hughes David +44(0)113 343 5105 D.W.Hughes@leeds.ac.uk Professor Hunter Ian +44(0)113 343 2055 I.C.Hunter@leeds.ac.uk Emeritus Professor Hunter Timothy +44(0)113 343 2790 T.N.Hunter@leeds.ac.uk Associate Professor (Academic) Hutchings Paul P.Hutchings@leeds.ac.uk Lecturer in Water, Sanitation & Health Iglesias Vallejo Daniela D.P.Iglesias@leeds.ac.uk Research Fellow Ihara Larissa L.M.Ihara@leeds.ac.uk Marie Curie ESR Researcher Ikonic Zoran +44(0)113 343 7320 Z.Ikonic@leeds.ac.uk Reader Ilee John J.D.Ilee@leeds.ac.uk STFC Ernest Rutherford Fellow & University Academic Fellow Indjin Dragan +44(0)113 343 2082 D.Indjin@leeds.ac.uk Reader Ingham Eileen +44(0)113 343 5691 E.Ingham@leeds.ac.uk Chair of Medical Immunology Ingham Trevor T.Ingham@leeds.ac.uk Senior Research Fellow Ingham Nancy N.Ingham@leeds.ac.uk Centre Manager Iqbal Nasser +44(0)113 343 3388 M.N.Iqbal@leeds.ac.uk Management Accountant Irabor Kenneth K.Irabor@leeds.ac.uk Experimental Officer Isaac Dec D.T.Isaac@leeds.ac.uk Apprentice Technician Isaac Graham G.H.Isaac@leeds.ac.uk Professor Issoglio Elena +44(0)113 343 4660 E.Issoglio@leeds.ac.uk Lecturer (Academic) Iuorio Ornella +44(0)113 343 2294 O.Iuorio@leeds.ac.uk Professor of Architecture & Structures Jackson Andrew +44(0)113 343 6480 A.E.Jackson@leeds.ac.uk Research/Teaching Fellow James Alexander (Sandy) A.James1@leeds.ac.uk Research Fellow Jaramillo Cevallos Pablo P.Jaramillo@leeds.ac.uk Research Fellow Javed Mohammed +44(0)113 343 2396 M.Javed@leeds.ac.uk Technician Jennings Louise +44(0)113 343 2100 L.M.Jennings@leeds.ac.uk Professor of Medical Engineering Jennings David D.Jennings@leeds.ac.uk Lecturer and University Academic Fellow Jha Animesh +44(0)113 343 2342 A.Jha@leeds.ac.uk Professor Ji Lanpeng +44(0)113 343 5891 L.Ji@leeds.ac.uk Lecturer in Actuarial/Financial Maths Jia Xiaodong +44(0)113 343 2801 X.Jia@leeds.ac.uk Lecturer (Academic) Jimack Peter +44(0)113 343 2002 P.K.Jimack@leeds.ac.uk Professor of Scientific Computing Jimenez-Cruz David D.Jimenez-Cruz@leeds.ac.uk Research Fellow Jin Zhongmin Z.Jin@leeds.ac.uk Visiting Professor Jinks Michael M.Jinks@leeds.ac.uk Postdoctoral Research Fellow Johnson Owen +44(0)113 343 5459 O.A.Johnson@leeds.ac.uk Senior Teaching Fellow Johnson Jenny +44(0)113 343 2127 J.E.Johnson@leeds.ac.uk Education Service Officer Johnson Peter +44(0)113 343 6515 P.Johnson@leeds.ac.uk Emertius Professor Johnson Benjamin +44(0)113 343 7127 B.R.G.Johnson@leeds.ac.uk Experimental Officer Johnston Katharine +44(0)113 343 8279 K.G.Johnston@leeds.ac.uk Research Fellow Jones Cliff +44(0)113 343 7311 J.C.Jones@leeds.ac.uk Professor Jones Alison +44(0)113 343 2099 A.C.Jones@leeds.ac.uk Associate Professor of Computational Biomedical Engineering Jones Margaret +44(0)113 343 5101 medsjon@leeds.ac.uk School Administrator Jones Jenny +44(0)113 343 2477 J.M.Jones@leeds.ac.uk Professor Jones Christopher +44(0)113 343 5107 C.A.Jones@maths.leeds.ac.uk Professor Jose Gin +44(0)113 343 2536 G.Jose@leeds.ac.uk Chair in Functional Materials Kaddouh Bilal +44(0)113 343 2201 B.Kaddouh@leeds.ac.uk Lecturer in Aerial Robotics (Assistant Professor) Kailas Lekshmi L.Kailas@leeds.ac.uk Experimental Officer in AFM Kale Girish +44(0)113 343 2805 G.M.Kale@leeds.ac.uk Reader Kamarol Zaman Faizal M.F.KamarolZaman@leeds.ac.uk Marie Curie Early Stage Researcher Kamde Deepak D.K.Kamde@leeds.ac.uk UKRI Research Fellow Kanuganti Sandeep S.R.Kanuganti@leeds.ac.uk Research Fellow Kapur Nik +44(0)113 343 2152 N.Kapur@leeds.ac.uk Professor of Applied Fluid Mechanics Karagila Asaf A.Karagila@leeds.ac.uk University Academic Fellow Karim Mshell +44(0)113 343 2269 M.Karim@leeds.ac.uk Education Service Officer/Reception Kay Robert +44(0)113 343 2139 R.W.Kay@leeds.ac.uk Associate Professor in Advanced Manufacturing Kazlauciunas Algy +44(0)113 343 2939 A.Kazlauciunas@leeds.ac.uk Laboratory Manager Kechidi Smail S.Kechidi@leeds.ac.uk KTP Associate - Cold-Formed Steel Specialist Kee Terence +44(0)113 343 6421 T.P.Kee@leeds.ac.uk Reader Keller Philipp P.Keller1@leeds.ac.uk Marie Curie (ESR) Researcher Kelmanson Mark +44(0)113 343 5150 M.Kelmanson@leeds.ac.uk Professor Kelsall Robert +44(0)113 343 2068 R.W.Kelsall@leeds.ac.uk Professor Kemp Andrew +44(0)113 343 2078 A.H.Kemp@leeds.ac.uk Professor of Communications Kennedy Joanne +44(0)113 343 2514 J.E.Kennedy@leeds.ac.uk CPD Marketing & Development Officer Kent John +44(0)113 343 5103 J.T.Kent@leeds.ac.uk Professor Kersale Evy +44(0)113 343 5149 E.Kersale@leeds.ac.uk Lecturer Khaliq Kishwer K.A.Khaliq@leeds.ac.uk Research Assistant Khan Yasir +44(0)113 343 3854 Y.Khan@leeds.ac.uk Laboratory Technician Khan Amirul +44(0)113 343 2286 A.Khan@leeds.ac.uk Lecturer Khatir Zinedine +44(0)113 343 2220 Z.Khatir@leeds.ac.uk Visiting Research Fellow Khodaparast Sepideh S.Khodaparast@leeds.ac.uk University Academic Fellow Kidd Matthew +44(0)113 343 6542 M.Kidd@leeds.ac.uk Temporary Clerk Kilburn Paul P.Kilburn@leeds.ac.uk IFS ResearchTechnician Kim Yi-Yeoun +44(0)113 343 9407 Y.Y.Kim@leeds.ac.uk Senior Research and Teaching Fellow Kim Jongrae +44(0)113 343 2159 menjkim@leeds.ac.uk Associate Professor King Marco-Felipe +44(0)113 343 1957 M.F.King@leeds.ac.uk Research Fellow King Jenna +44(0)113 343 5746 J.King1@leeds.ac.uk CPD, Conference & Events Coordinator King Sarah S.King@leeds.ac.uk Project Manager King Stuart S.King3@leeds.ac.uk Analytical Technician Kirk Daniel +44(0)113 343 3807 D.R.Kirk@leeds.ac.uk Tutorial Assistant Kisil Vladimir V. +44(0)113 343 5173 V.Kisil@leeds.ac.uk Reader in Applied Analysis Kitayama Shoma S.Kitayama@leeds.ac.uk Research Fellow Knaggs Eve +44(0)113 343 0034 E.Knaggs@leeds.ac.uk Senior Administration Assistant Kokarev Gerasim +44(0)113 343 0599 G.Kokarev@leeds.ac.uk Lecturer Komissarov Serguei +44(0)113 343 5127 S.S.Komissarov@leeds.ac.uk Professor Kortantamer Dicle D.Kortantamer@leeds.ac.uk Lecturer in Project Management Kosarieh Shahriar +44(0)113 343 9741 S.Kosarieh@leeds.ac.uk Lecturer In Mechanical Engineering Krishnan Sreejith S.Krishnan1@leeds.ac.uk Research Fellow in Cementitious Materials Chemistry Kubiak Krzysztof +44(0)113 343 8333 K.Kubiak@leeds.ac.uk Associate Professor Kuffner Dos Anjos Rafael +44(0)113 343 3625 R.KuffnerdosAnjos@leeds.ac.uk Lecturer in Computer Graphics Kulak Alexander A.Kulak@leeds.ac.uk Materials Characterisn Istrmn Speclst Kulikowski Anoushka +44(0)113 343 0554 A.kulikowski@leeds.ac.uk Centre Manager Kumar Satish +44(0)113 343 3722 S.Kumar3@leeds.ac.uk Research Fellow Kumari Pallavi P.Kumari1@leeds.ac.uk Research Fellow in Plant Cell Biophysics Kumi Barimah Eric +44(0)113 343 2540 E.Kumi-Barimah@leeds.ac.uk Experimental Officer Kundu Iman I.Kundu@leeds.ac.uk Research Fellow Kwan Raymond +44(0)113 343 5760 R.S.Kwan@leeds.ac.uk Professor of Scheduling Lai Chun sing C.S.Lai@leeds.ac.uk Visiting Research Fellow Lai Xiaojun +44(0)113 343 2439 X.Lai@leeds.ac.uk Lecturer Lambert Benjamin B.S.Lambert@leeds.ac.uk Lecturer in Pure Mathematics Langfeld Kurt +44(0)113 343 5414 K.Langfeld@leeds.ac.uk Head of School of Mathematics, Professor in Theoretical Physics Lassila Toni +44(0)113 343 3724 T.Lassila@leeds.ac.uk Lecturer Lau Hui +44(0)113 343 3748 H.K.Lau@leeds.ac.uk Teaching Fellow Laughton Tom +44(0)113 343 4480 T.Laughton@leeds.ac.uk Functional Education Service Manager Lawey Ahmed A.Q.Lawey@leeds.ac.uk Lecturer in Communication Networks Lawlor Rob R.S.Lawlor@leeds.ac.uk Lecturer Lawrie Ian I.D.Lawrie@leeds.ac.uk Emeritus Professor Laycock Campbell Jeremy +44(0)113 343 7190 J.Laycock@leeds.ac.uk Resarch & Innovation Development Manager Le Khoa K.Le@leeds.ac.uk Lecturer Lebrero Alejandro A.Lebrero@leeds.ac.uk Research Software Engineer Lecheval Valentin V.Lecheval@leeds.ac.uk Research Fellow Lee Andrew +44(0)113 343 9712 A.Lee@leeds.ac.uk Centre Manager, Bragg Centre for Materials Research Lee Jaemin J.Lee2@leeds.ac.uk University Academic Fellow Leng Joanna +44(0)113 343 3809 J.Leng@leeds.ac.uk Senior Research Software Engineering Fellow Leonardo Diaz Roberto R.LeonardoDiaz@leeds.ac.uk Research Fellow Leonetti Matteo +44(0)113 343 5792 M.Leonetti@leeds.ac.uk Lecturer Lesnic Daniel +44(0)113 343 5181 D.Lesnic@leeds.ac.uk Professor in Applied Mathematics Levesley Martin +44(0)113 343 2110 M.C.Levesley@leeds.ac.uk Professor Lewis Kelly +44(0)113 343 0095 K.Lewis@adm.leeds.ac.uk Human Resources Officer Li Kang K.Li1@leeds.ac.uk Professor of Smart Energy Systems Li Hu +44(0)113 343 7754 H.Li3@leeds.ac.uk Associate Professor Li Zhenhong Z.H.Li@leeds.ac.uk Research Fellow Li Lianhe +44(0)113 343 6887 L.H.Li@leeds.ac.uk Senior Research Fellow/Experimental Officer Li Xiang X.Li11@leeds.ac.uk Research Fellow Lifshitz Ron R.Lifshitz@leeds.ac.uk Visiting Cheney Professor Lima Dos Santos Pedro P.L.LimaDosSantos@leeds.ac.uk Marie Curie Early Stage Researcher Linfield Edmund +44(0)113 343 2015 E.H.Linfield@leeds.ac.uk Professor Linyard Andy +44(0)113 343 5440 A.J.Linyard@leeds.ac.uk Education Service Officer (Admissions) Liu Jian J.Liu9@leeds.ac.uk Lecturer Liu Jason J.H.W.Liu@leeds.ac.uk Research Fellow Liu Ronghui +44(0)113 343 5338 R.Liu@its.leeds.ac.uk Professor Liu Haiyan +44(0)113 343 2930 H.Liu1@leeds.ac.uk University Academic Fellow in Statistical and Machine Learning Liwski Lukasz L.Liwski@leeds.ac.uk Student Education Service Assistant Lloyd Simon +44(0)113 343 2681 S.R.Lloyd@leeds.ac.uk Technician Lockwood Alexander A.P.G.Lockwood@leeds.ac.uk Visiting Researcher: Sludge Centre of Expertise Loganathan Sarathkumar S.Loganathan@leeds.ac.uk Postdoctoral Research Fellow Lopez Garcia Martin +44(0)113 343 8951 M.LopezGarcia@leeds.ac.uk Associate Professor Loveridge Fleur +44(0)113 343 2248 F.A.Loveridge@leeds.ac.uk Associate Professor of Geostructures Lumsden Stuart +44(0)113 343 6691 S.L.Lumsden@leeds.ac.uk Associate Professor Lunn Justin S +44(0)113 343 2320 J.S.Lunn@leeds.ac.uk Associate Professor Lynch Tom +44(0)113 343 1397 T.O.Lynch@leeds.ac.uk Project Manager Lythe Grant +44(0)113 343 5132 G.D.Lythe@leeds.ac.uk Professor of Applied Mathematics M Roufechaei Kamand K.MRoufechaei@leeds.ac.uk Teaching and Thesis supervisor Ma CaiYun +44(0)113 343 7809 C.Y.Ma@leeds.ac.uk Senior Research Fellow Macdonald Geraldine +44(0)113 343 8914 G.Macdonald@leeds.ac.uk Administrative Assistant Macente Alice A.Macente@leeds.ac.uk SEM - XCT Experimental Officer MacIntyre Jay +44(0)113 343 2096 J.M.MacIntyre@leeds.ac.uk Deputy Faculty Finance Manager Macpherson H Dugald +44(0)113 343 5166 H.D.MacPherson@leeds.ac.uk Professor Magee Derek +44(0)113 343 6819 D.R.Magee@leeds.ac.uk Lecturer Mahdi Faiz +44(0)113 343 9965 F.M.Mahdi@leeds.ac.uk Research Fellow Mahmud Tariq +44(0)113 343 2431 T.Mahmud@leeds.ac.uk Associate Professor Mandle Richard R.Mandle@leeds.ac.uk UKRI Future Leaders Fellow and University Academic Fellow Manga Mohamed M.S.Manga@leeds.ac.uk Post-Doctoral Research Fellow Mangan Thomas T.P.Mangan@leeds.ac.uk Research Fellow Mann Richard +44(0)113 343 8988 R.P.Mann@leeds.ac.uk Associate Professor Mansfield Jane +44(0)113 343 8324 J.Mansfield@leeds.ac.uk Student Ed Service Officer (Admissions) Mantova Vincenzo +44(0)113 343 8126 V.L.Mantova@leeds.ac.uk Lecturer Mao Xiaoan +44(0)113 343 4807 X.Mao@leeds.ac.uk Lecturer (Academic) Mardia Kanti +44(0)113 343 5100 K.V.Mardia@leeds.ac.uk Senior Research Professor Marrows Christopher +44(0)113 343 3780 C.H.Marrows@leeds.ac.uk Professor of Condensed Matter Physics Marsden Steve +44(0)113 343 6425 S.P.Marsden@leeds.ac.uk Professor of Organic Chemistry Marsh Daniel +44(0)113 343 9296 D.Marsh@leeds.ac.uk Priestley Chair in Comparative Planetary Atmospheres Marsh Bethany +44(0)113 343 5164 B.R.Marsh@leeds.ac.uk Professor Marsh Alastair A.Marsh@leeds.ac.uk Research Fellow in Alkali-Activated Materials Martin Adrian A.P.Martin@leeds.ac.uk Tutorial Assistant Martin Elaine +44(0)113 343 0889 E.Martin@leeds.ac.uk Professor of Chemical and Process Engineering Martin Paul +44(0)113 343 7787 P.P.Martin@leeds.ac.uk Professor Martin Sue +44(0)113 343 2000 S.Martin@leeds.ac.uk Education Service Officer / Receptionist Mason Lee +44(0)113 343 3735 L.A.Mason@leeds.ac.uk Research & Innovation Development Manager Matamoros Veloza Adriana A.MatamorosVeloza@leeds.ac.uk Research Fellow Mathai Basil B.Mathai@leeds.ac.uk UKRI Research Fellow Mattar Suhaila +44(0)113 343 0800 S.Mattar@leeds.ac.uk Lecturer Matthews Kimberley K.Matthews@leeds.ac.uk CDT Manager (based in Sheffield) Mattsson Johan +44(0)113 343 3815 K.J.L.Mattsson@leeds.ac.uk Associate Professor Matzkin Victor V.F.Matzkin@leeds.ac.uk PhD Student Mayambala Francisca F.J.N.Mayambala@leeds.ac.uk Internship: Equality and Inclusion Project Assistant Mayne Kelly Kaeyo +44(0)113 343 0907 K.Kelly@leeds.ac.uk Communication and Engagement Assistant, Grow MedTech McCaffrey Bill +44(0)113 343 6625 W.D.McCaffrey@leeds.ac.uk Professor McCall Blake B.McCall@leeds.ac.uk Research Fellow McCall Sam +44(0)113 343 8813 S.I.McCall@leeds.ac.uk Senior Marketing Executive McCann Sarah +44(0)113 343 1960 S.McCann@leeds.ac.uk Student Education Service Officer McConnell Claire +44(0)113 343 2380 C.L.McConnell@leeds.ac.uk Senior Education Service Officer McCormack Paul +44(0)113 343 2322 P.J.McCormack@leeds.ac.uk Research Finance Assistant McGonagle Dennis +44(0)113 392 4747 D.G.McGonagle@leeds.ac.uk Professor (Clinical) McGowan Patrick +44(0)113 343 6404 P.C.McGowan@leeds.ac.uk Professor McIntosh Andy Emeritus Professor McKay Alison +44(0)113 343 8175 A.McKay@leeds.ac.uk Professor McKay James +44(0)113 343 2556 J.McKay@leeds.ac.uk CDT Manager Mclaughlan James +44(0)113 343 0956 J.R.McLaughlan@leeds.ac.uk Associate Professor McLean Christopher +44(0)113 343 8573 C.J.McLean@leeds.ac.uk Linux Systems Manager McLernon Des +44(0)113 343 2050 D.C.McLernon@leeds.ac.uk Reader McNeill Erin +44(0)113 343 4065 E.McNeill@leeds.ac.uk Physics Outreach Officer McPhillie Martin +44(0)113 343 6513 M.J.McPhillie@leeds.ac.uk Lecturer in Organic Chemistry Meggs Andrew +44(0)113 343 8845 A.W.S.Meggs@leeds.ac.uk Research Support Officer (Pre Award) Megone Christopher +44(0)113 343 7888 C.B.Megone@leeds.ac.uk Professor Meldrum Fiona +44(0)113 343 6414 F.Meldrum@leeds.ac.uk Professor Meng Qingen Q.Meng@leeds.ac.uk Teaching Fellow Mengoni Marlne +44(0)113 343 5011 M.Mengoni@leeds.ac.uk Associate Professor in Computational Medical Engineering Menzel Robert +44(0)113 343 6407 R.Menzel@leeds.ac.uk Associate Professor Messmer Margit +44(0)113 343 5104 M.Messmer@leeds.ac.uk Principal Teaching Fellow Mhamdi Lotfi +44(0)113 343 6919 L.Mhamdi@leeds.ac.uk Lecturer Micklethwaite Stuart +44(0)113 343 2559 S.L.Micklethwaite@leeds.ac.uk Electron Microscopy Support Technician Mikaitis Mantas M.Mikaitis@leeds.ac.uk Lecturer Mikhailov Alexandre +44(0)113 343 5176 A.V.Mikhailov@leeds.ac.uk Professorial Research Fellow Miles Danielle +44(0)113 343 0921 D.E.Miles@leeds.ac.uk Technology Innovation Manager Milne Steven +44(0)113 343 2539 S.J.Milne@leeds.ac.uk Professor of Materials Chemistry Minton-Taylor Jasper +44(0)113 343 5746 J.Minton-Taylor@leeds.ac.uk CPD, Conference and Events Coordinator Mistry Devesh D.A.Mistry@leeds.ac.uk Leverhulme Trust Early Career Fellow and UAF Mistry Nimesh +44(0)113 343 7459 N.Mistry@leeds.ac.uk Senior Teaching Fellow Mitseas Ioannis +44(0)113 343 5784 I.Mitseas@leeds.ac.uk Lecturer in Structural Engineering Mobilia Mauro +44(0)113 343 1591 M.Mobilia@leeds.ac.uk Professor of Applied Mathematics Mohammed Abdulah A.Mohammed@leeds.ac.uk Chem stores technician Molina-Paris Carmen +44(0)113 343 5151 C.MolinaParis@leeds.ac.uk Professor Molzahn Ben +44(0)113 343 5104 B.Molzahn@leeds.ac.uk Senior Student Education Service Officer Montoya Pachongo Carolina C.MontoyaPachongo@leeds.ac.uk Research Fellow Moodley Kris +44(0)113 343 2329 K.Moodley@leeds.ac.uk Senior Lecturer (Teaching + Scholarship) Moore Thomas +44(0)113 343 3896 T.A.Moore@leeds.ac.uk Assoc Prof in Condensed Matter Physics Moore Rhys +44(0)113 343 8493 R.A.Moore@leeds.ac.uk Senior Technician - Additive Manufacturing / 3D Printing Moorsom Timothy T.Moorsom@leeds.ac.uk Royal Academy of Engineering Fellow Morina Ardian +44(0)113 343 8965 A.Morina@leeds.ac.uk Professor Morris Lindsay +44(0)113 343 2694 L.Morris@leeds.ac.uk Education Service Officer Morris Lisa-Dionne +44(0)113 343 6665 L.D.Morris@leeds.ac.uk Associate Professor of Human Activity & Product Design Developme Morris Kevin +44(0)113 343 9366 K.Morris1@leeds.ac.uk Professor of Radio Frequency Engineering Morrison Ciaran C.M.Morrison@leeds.ac.uk Aviation Simulator Manager Morsy Mohamed M.Morsy@leeds.ac.uk Research Fellow Mortimer Sally +44(0)113 343 2246 S.Mortimer@leeds.ac.uk Senior Education Service Officer Moseley Katy-anne K.A.Moseley@leeds.ac.uk Impact Fellow Motamen Salehi Farnaz F.MotamenSalehi@leeds.ac.uk Teaching Fellow Muhit Imrose I.Muhit@leeds.ac.uk Research Fellow in Masonry Arch Bridges Muller Frans +44(0)113 343 2933 F.L.Muller@leeds.ac.uk Chair in Chemical Process Engineering Muller Haiko +44(0)113 343 5445 H.Muller@leeds.ac.uk Senior Lecturer Mullis Andrew +44(0)113 343 2568 A.M.Mullis@leeds.ac.uk Professor Murphy William +44(0)113 343 5232 W.Murphy@leeds.ac.uk Senior Lecturer Murphy Julie +44(0)113 343 2157 J.F.Murphy@leeds.ac.uk Finance Officer Murphy Graham +44(0)113 343 5187 G.J.Murphy@leeds.ac.uk Senior Teaching Fellow Murray Rachael +44(0)113 343 0893 R.Murray@leeds.ac.uk Marketing and Development Officer Nadin Timothy T.J.Nadin@leeds.ac.uk School Manager Nagaraj Mamatha +44(0)113 343 8475 M.Nagaraj@leeds.ac.uk Lecturer Nahil Mohamad M.A.Nahil@leeds.ac.uk Research/Teaching Fellow Nelson Adam +44(0)113 343 6502 A.S.Nelson@leeds.ac.uk Professor Nelson Andrew +44(0)113 343 6409 A.L.Nelson@leeds.ac.uk Professor Nelson Andrew +44(0)113 343 6409 A.L.Nelson@leeds.ac.uk Professor Neville Anne +44(0)113 343 6812 A.Neville@leeds.ac.uk Professor Newisar May M.Newisar@leeds.ac.uk Research Fellow Nezami Zeinab Z.Nezami@leeds.ac.uk Research Fellow Nguyen Bao +44(0)113 343 0109 B.Nguyen@leeds.ac.uk Associate Professor Ngwana Adama A.Ngwana@leeds.ac.uk Administrative Assistant Nie Luzhen L.Nie@leeds.ac.uk Research Fellow Niesen Jitse +44(0)113 343 5870 J.Niesen@leeds.ac.uk Lecturer Nijhoff Frank +44(0)113 343 5120 F.W.Nijhoff@leeds.ac.uk Professor of Mathematical Physics Nikitas Nikolaos +44(0)113 343 0901 N.Nikitas@leeds.ac.uk Associate Professor in Structural Dynamics and Engineering Nix Michael M.G.Nix@leeds.ac.uk Visiting Senior Research Fellow Nlebedim Valentine V.U.Nlebedim@leeds.ac.uk Teaching Fellow Noakes Catherine +44(0)113 343 2306 C.J.Noakes@leeds.ac.uk Professor of Environmental Engineering for Buildings Noble Lydia L.R.Noble@leeds.ac.uk Student Education Service Assistant Norbertczak Halina +44(0)113 343 5607 H.T.Norbertczak@leeds.ac.uk PDRA Norman Alistair +44(0)113 343 7818 A.W.T.Norman@lubs.leeds.ac.uk Lecturer (Teaching and Scholarship) Normington Chris C.Normington1@leeds.ac.uk Student Education Services Manager O'Reilly Gerard G.A.OReilly@leeds.ac.uk Tutorial Assistant Okoro Shekwaga Cynthia C.K.OkoroShekwaga@leeds.ac.uk BBSRC Discovery Fellow Oliver Richard +44(0)113 343 3832 R.G.Oliver@leeds.ac.uk Technician Onel Lavinia L.Onel@leeds.ac.uk Research Fellow Ong Zhan +44(0)113 343 0051 Z.Y.Ong@leeds.ac.uk Associate Professor Ordyniak Sebastian S.Ordyniak@leeds.ac.uk Lecturer (Algorithms and Complexity) Orlova Ekaterina E.E.Orlova@leeds.ac.uk Research Fellow Oudmaijer Rene +44(0)113 343 3886 R.D.Oudmaijer@leeds.ac.uk Professor Owen Joshua J.J.Owen@leeds.ac.uk Lecturer Ozdemir Servet S.Ozdemir@leeds.ac.uk Post Doctoral Research Associate Pachos Jiannis +44(0)113 343 3817 J.K.Pachos@leeds.ac.uk Professor of Theoretical Physics Paesani Giacomo G.Paesani@leeds.ac.uk Research Fellow (Algorithms and Complexity) Palczewski Jan +44(0)113 343 5180 J.Palczewski@leeds.ac.uk Associate Professor Pallipurath Anuradha A.R.Pallipurath@leeds.ac.uk Royal Society Olga Kennard Fellow Panic Olja O.Panic@leeds.ac.uk Dorothy Hodgkin Fellow Papallas Rafael R.Papallas@leeds.ac.uk Research Fellow Papic Zlatko +44(0)113 343 3882 Z.Papic@leeds.ac.uk Associate Professor in Theoretical Physics Parker Douglas +44(0)113 343 6739 D.J.Parker@leeds.ac.uk Professor of Meteorology (School of Mathematics and School of Ea Parker Shelly +44(0)113 343 2934 M.Parker@leeds.ac.uk School Support Officer Parker Alison +44(0)113 343 5126 A.E.Parker@leeds.ac.uk Associate Professor Partington Jonathan +44(0)113 343 5123 J.R.Partington@leeds.ac.uk Professor Pask Christopher +44(0)113 343 4658 C.M.Pask@leeds.ac.uk Experimental Officer/Sen.Teaching Fellow Paterson Samantha S.Paterson@leeds.ac.uk Research Fellow Peacock David D.C.Peacock@leeds.ac.uk Teaching Fellow Pegler Sam +44(0)113 343 0048 S.Pegler@leeds.ac.uk University Academic Fellow Pensabene Virginia V.Pensabene@leeds.ac.uk Associate Professor Pepper Max M.Pepper@leeds.ac.uk Technician Pessoa de Miranda Marcelo +44(0)113 343 6332 M.Miranda@leeds.ac.uk Lecturer Pessu Frederick Oritseweneye F.O.Pessu@leeds.ac.uk Lecturer in Corrosion engineering Peyman Sally +44(0)113 343 3747 S.Peyman@leeds.ac.uk University Academic Fellow Phillips Luke L.Phillips@leeds.ac.uk Additive Manufacturing/3D Printing Tech Phylaktou Herodotos +44(0)113 343 2505 H.N.Phylaktou@leeds.ac.uk Senior Lecturer Pickering Jonathan +44(0)113 343 5836 J.H.Pickering@leeds.ac.uk Research Fellow Pickering Andrew +44(0)113 343 2131 A.D.Pickering@leeds.ac.uk Robotics Manufacturing Technician Pimm Andrew A.J.Pimm@leeds.ac.uk Research Fellow Pittard Julian +44(0)113 343 3805 J.M.Pittard@leeds.ac.uk Reader in Theoretical Astrophysics Piya Afrina Khan A.K.Piya@leeds.ac.uk Marie Curie ESR Researcher Plane John +44(0)113 343 8044 J.M.C.Plane@leeds.ac.uk Professor of Atmospheric Chemistry Pollock Isobel I.A.Pollock@leeds.ac.uk Visiting Professor Ponjavic Aleks +44(0)113 343 3839 A.Ponjavic@leeds.ac.uk University Academic Fellow Pournaras Evangelos E.Pournaras@leeds.ac.uk Associate Professor Prato Carlo C.Prato@leeds.ac.uk Professor of Transportation Engineering Preston George G.W.Preston@leeds.ac.uk Research Fellow Price Victoria +44(0)113 343 7218 V.Price@leeds.ac.uk Head of Marketing Pryce Gregory G.M.Pryce@leeds.ac.uk Research Fellow Pugazhendi Navaneethakrishnan N.Pugazhendi@leeds.ac.uk Marie Curie ESR Researcher Pugh Samantha +44(0)113 343 2985 S.L.Pugh@leeds.ac.uk Associate Professor in STEM Education Purdy Robert R.Purdy@leeds.ac.uk Lecturer and Admissions Tutor Purnell Philip +44(0)113 343 0370 P.Purnell@leeds.ac.uk Professor of Materials and Structures Qidan Ahmad A.A.Qidan@leeds.ac.uk Postdoctoral Research Fellow Querin Ozz +44(0)113 343 2218 O.M.Querin@leeds.ac.uk Professor of Design Optimisation Rabbani Arash A.Rabbani@leeds.ac.uk Lecturer (Assistant Professor) Raffle-Edwards Shona +44(0)113 343 8598 S.Raffle@leeds.ac.uk Outreach Coordinator Rahman Ali A.Rahman1@leeds.ac.uk SWJTU Joint School staff member Rai Kiran +44(0)113 343 5116 K.K.Rai@leeds.ac.uk Research and Facilities Officer Raihan MM M.M.Raihan@leeds.ac.uk Marie Curie Early Stage Researcher Ramanatha Sachin S.P.H.Ramanatha@leeds.ac.uk Research Fellow Ramasse Quentin Q.M.Ramasse@leeds.ac.uk Chair in Advanced Electron Microscopy Ranathunga Ashani A.S.Ranathunga@leeds.ac.uk Lecturer (Academic) Ranner Thomas +44(0)113 343 4697 T.Ranner@leeds.ac.uk Lecturer Rathjen Michael +44(0)113 343 5109 M.Rathjen@leeds.ac.uk Professor Rathore Rajesh +44(0)113 343 8984 R.S.Rathore@leeds.ac.uk Research Support Officer Ravi Manoj M.Ravi@leeds.ac.uk Lecturer Ravikumar Nishant N.Ravikumar@leeds.ac.uk Lecturer in Computer Science Raxworthy Mike +44(0)113 343 8775 M.J.Raxworthy@leeds.ac.uk Associate Professor in Engineering Management and Innovation Rayner Christopher +44(0)113 343 6579 C.M.Rayner@leeds.ac.uk Professor of Organic Chemistry Rayner Christopher +44(0)113 343 6579 C.M.Rayner@leeds.ac.uk Professor of Organic Chemistry Razavi Mohsen +44(0)113 343 9406 M.Razavi@leeds.ac.uk Professor Read Daniel +44(0)113 343 5124 D.J.Read@leeds.ac.uk Professor of Soft Matter Readioff Rosti R.Readioff@leeds.ac.uk Research Fellow Rees Amy +44(0)113 343 1032 A.L.Rees@leeds.ac.uk Research Administrator Rees Simon +44(0)113 343 1638 S.J.Rees@leeds.ac.uk Professor of Building Energy Systems Revill Charlotte C.H.Revill@leeds.ac.uk Research Fellow Rice Hugh H.P.Rice@leeds.ac.uk Postdoctoral research fellow Richards Megan M.K.Richards@leeds.ac.uk Demonstrator/Module Assistant Richards Daniel D.H.Richards@leeds.ac.uk Research Associate Richardson David +44(0)113 343 2101 D.Richardson@leeds.ac.uk Associate Professor of Structural Design Richardson Thomas T.Richardson1@leeds.ac.uk Teaching Assistant Richardson Ian +44(0)113 343 2331 I.G.Richardson@leeds.ac.uk Professor Richardson Robert +44(0)113 343 2156 R.C.Richardson@leeds.ac.uk Professor Richardson-Barlow Clare C.G.Richardson-Barlow@leeds.ac.uk Research Fellow Richter Ralf +44(0)113 343 1969 R.Richter@leeds.ac.uk Associate Professor Ries Michael +44(0)113 343 3859 M.E.Ries@leeds.ac.uk Professor Rigby Andrew A.J.Rigby@leeds.ac.uk Postdoctoral Research Fellow Rimmer Jo +44(0)113 343 6667 J.Rimmer1@leeds.ac.uk Administration Manager Rimmington Emma E.Rimmington@leeds.ac.uk General Support Assistant/ Receptionist Roberts Kevin +44(0)113 343 2408 K.J.Roberts@leeds.ac.uk Professor Robertson Ian +44(0)113 343 7076 I.D.Robertson@leeds.ac.uk Professor Robertson Clare +44(0)113 343 7805 C.Robertson1@leeds.ac.uk Senior Marketing Executive Robinson Amanda +44(0)113 343 2080 A.Robinson@leeds.ac.uk Personal Assistant Robinson Catherine C.L.Robinson1@leeds.ac.uk Research Support Officer (Pre-Award) Robinson Rachel +44(0)113 343 7680 R.A.Robinson@leeds.ac.uk Research Administrator Rooney Gabriel G.G.Rooney@leeds.ac.uk Visiting Research Fellow Roper Richard +44(0)113 343 6445 P.R.Roper@leeds.ac.uk Technician Rosamond Mark +44(0)113 343 7381 M.C.Rosamond@leeds.ac.uk Experimental Officer Ross Andrew +44(0)113 343 1017 A.B.Ross@leeds.ac.uk Associate Professor Rostami Javad J.Rostami@leeds.ac.uk KTP Associate Rucklidge Alastair +44(0)113 343 5161 A.M.Rucklidge@leeds.ac.uk Professor Ruddle Roy +44(0)113 343 1711 R.A.Ruddle@leeds.ac.uk Professor of Computing Rumble Olivia O.J.Rumble@leeds.ac.uk Student Ed Service Officer (Admissions) Ruprecht Daniel +44(0)113 343 2201 D.Ruprecht@leeds.ac.uk Visiting Professor Russo Mirko M.Russo@leeds.ac.uk Research Fellow in Design and Virtual Reality Sabini Luca L.Sabini@leeds.ac.uk Associate Professor in Project Management Sagar Catherine C.Sagar@leeds.ac.uk Research Support Assistant Saha Dipankar D.Saha@leeds.ac.uk Research Fellow Sainati Tristano T.Sainati@leeds.ac.uk Lecturer in project management Saleh Ehab +44(0)113 343 9336 E.Saleh@leeds.ac.uk Lecturer in Manufacturing Processes Salman Naveed N.Salman1@leeds.ac.uk Research Fellow Sanni Olujide O.S.Sanni@leeds.ac.uk Research Fellow/Experimental Officer Santos-Carballal David D.Santos-Carballal@leeds.ac.uk Research Fellow Sarhosis Vasilis +44(0)113 343 9343 V.Sarhosis@leeds.ac.uk Professor of Resilient Structures & Infrastructure Sarrami Foroushani Ali A.Sarrami@leeds.ac.uk Research Fellow Sasaki Satoshi +44(0)113 343 3578 S.Sasaki@leeds.ac.uk Lecturer (Academic) Saul Glyn +44(0)113 343 5528 G.Saul@leeds.ac.uk Faculty Head of Finance Savage Michael +44(0)113 343 3905 M.D.Savage@leeds.ac.uk Emeritus Professor Savy Claire +44(0)113 343 5449 C.Savy@leeds.ac.uk Centre Manager Scarabel Francesca F.Scarabel@leeds.ac.uk Lecturer in Mathematical Biology Schilhan Jonathan J.Schilhan@leeds.ac.uk Senior Research Associate Schneider Judith +44(0)113 343 2126 J.M.Schneider@leeds.ac.uk Administrative Support Officer - iTF Schroeder Sven S.L.M.Schroeder@leeds.ac.uk Centenary Chair-Engineering Applications Scott Andrew +44(0)113 343 2573 A.J.Scott@leeds.ac.uk Senior Lecturer Scott Mark +44(0)113 343 3819 M.Scott@leeds.ac.uk Technician Scott Stephen +44(0)113 343 6492 S.K.Scott@leeds.ac.uk Executive Dean (Interim) Seakins Paul +44(0)113 343 6568 P.W.Seakins@leeds.ac.uk Professor Seakins Paul +44(0)113 343 6568 P.W.Seakins@leeds.ac.uk Professor Selim Gehan +44(0)113 343 3082 G.Selim@leeds.ac.uk Hoffman Wood Professorof Architecture Sergeeva Natalia +44(0)113 343 7553 N.Sergeeva@leeds.ac.uk Lecturer Shafagh Ida I.Shafagh@leeds.ac.uk Research Fellow in Geothermal Energy Exc Shafer Paul +44(0)113 343 4843 P.E.Shafer@leeds.ac.uk Associate Professor Shalashilin Dmitry +44(0)113 343 7610 D.Shalashilin@leeds.ac.uk Professor of Computational Chemistry Shang Shang S.Shang@leeds.ac.uk Visiting Researcher Sharma Krishna K.Sharma1@leeds.ac.uk Research Fellow Sharp Benjamin +44(0)113 343 5487 B.G.Sharp@leeds.ac.uk Lecturer in Mathematical Analysis Shehzad Muhammad M.K.Shehzad@leeds.ac.uk Postdoctoral Research Fellow Shepherd Simon +44(0)113 343 6616 S.P.Shepherd@its.leeds.ac.uk Professor of Transport Modelling Shepley Philippa P.M.Shepley@leeds.ac.uk Experimental Officer Shi Wenyuan W.Shi1@leeds.ac.uk Associate Professor of Electronics and Electrical Engineering Shim Jung-uk +44(0)113 343 3903 J.Shim@leeds.ac.uk Lecturer Shires Andrew +44(0)113 343 5457 A.Shires@leeds.ac.uk Associate Professor Shuttleworth Matthew M.P.Shuttleworth@leeds.ac.uk Research Fellow Simpson Robert +44(0)113 343 2362 R.J.Simpson@leeds.ac.uk Research Technician Skene Calum C.S.Skene@leeds.ac.uk Research Fellow Slade Fiona +44(0)113 343 2202 F.R.Slade@leeds.ac.uk Administrative Support Officer - iFS Sleigh Andrew +44(0)113 343 2398 P.A.Sleigh@leeds.ac.uk Senior Lecturer Smith Ryan R.J.Smith1@leeds.ac.uk Trainee Technician Smith Nigel +44(0)113 343 2301 N.J.Smith@leeds.ac.uk Professor Smith Colin +44(0)113 343 3765 C.C.Smith@leeds.ac.uk Goods Inward Technician Smith Neil N.W.Smith@leeds.ac.uk Technician Smye Stephen S.W.Smye@leeds.ac.uk Professor Soltanahmadi Siavash +44(0)113 343 2107 S.Soltanahmadi@leeds.ac.uk Research Fellow Somjit Nutapong N.Somjit@leeds.ac.uk Associate Professor in Microwave and Wireless Engineering Speight Martin +44(0)113 343 5169 J.M.Speight@leeds.ac.uk Professor of Mathematics Spraggs Rachael +44(0)113 343 3057 R.E.Spraggs@leeds.ac.uk Research and Innovation Development Manager Squires David +44(0)113 343 2183 D.Squires@leeds.ac.uk Estates & Fabrics Officer Staggs John +44(0)113 343 2495 J.E.J.Staggs@leeds.ac.uk Senior Lecturer Steenson Paul +44(0)113 343 2024 D.P.Steenson@leeds.ac.uk Senior Lecturer Steenson Karen +44(0)113 343 2057 K.A.Steenson@leeds.ac.uk ERIS Manager Stell John +44(0)113 343 1076 J.G.Stell@leeds.ac.uk Senior Lecturer Stevens Karen +44(0)113 343 2255 K.Stevens@leeds.ac.uk Lead Technician Stewart Doug +44(0)113 343 2287 D.I.Stewart@leeds.ac.uk Professor Stewart Todd +44(0)113 343 2133 T.D.Stewart@leeds.ac.uk Professor of Mechanical and Medical Engineering Stockdale Andrew A.Stockdale2@leeds.ac.uk Research Support Technician Stone Daniel +44(0)113 343 6508 D.Stone@leeds.ac.uk Associate Professor Straw Philip P.A.Straw@leeds.ac.uk Research Assistant Strohmaier Alexander +44(0)113 343 8884 A.Strohmaier@leeds.ac.uk Chair in Analysis Sturman Rob +44(0)113 343 5139 R.Sturman@leeds.ac.uk Associate Professor Sturman Rob +44(0)113 343 5139 R.Sturman@leeds.ac.uk Associate Professor Subramanian Priya +44(0)113 343 2930 P.Subramanian@leeds.ac.uk Research Fellow Summers Jon +44(0)113 343 2151 J.L.Summers@leeds.ac.uk Senior Lecturer Sutherland Joanne +44(0)113 343 8308 J.Sutherland@leeds.ac.uk SOFI CDT Administrator Sweetman Adam +44(0)113 343 3808 A.M.Sweetman@leeds.ac.uk Royal Society University Research Fellow Szamuk Emil +44(0)113 343 3765 E.Szamuk@leeds.ac.uk Senior Estates and Fabric Technician Szumilo Karol K.Szumilo@leeds.ac.uk Research Fellow Talbot Paula +44(0)113 343 3862 P.Talbot@leeds.ac.uk PA to Head of School Taleb Wassim W.Taleb@leeds.ac.uk Teaching and Research Fellow in Electrochemistry and Corrosion Tang Yuzhou Y.Tang@leeds.ac.uk Research Fellow Tange Rudolf +44(0)113 343 9246 R.H.Tange@leeds.ac.uk Lecturer Tapley Kelvin +44(0)113 343 6732 K.Tapley@leeds.ac.uk Senior Lecturer in Colour Science Tarn Mark +44(0)113 343 5605 M.D.Tarn@leeds.ac.uk Research Fellow Tate James +44(0)113 343 6608 J.E.Tate@its.leeds.ac.uk Associate Professor Taylor Zeike +44(0)113 343 0767 Z.Taylor@leeds.ac.uk Associate Professor Taylor Peter +44(0)113 343 7169 P.G.Taylor@leeds.ac.uk Chair in Sustainable Energy Systems Taylor Paul +44(0)113 343 6529 P.C.Taylor@leeds.ac.uk Professor of Chemical Education Taylor Charles +44(0)113 343 5168 C.C.Taylor@leeds.ac.uk Professor Tedd Christopher C.F.Tedd@leeds.ac.uk Teaching Fellow and Digital Transformation Champion Thomas Briony +44(0)113 343 9694 B.G.Thomas@leeds.ac.uk Associate Professor in Design Science Thomas Jordan J.Thomas@leeds.ac.uk Lead Technician Thompson Peter +44(0)113 343 2471 P.R.Thompson@leeds.ac.uk Technical Officer Thompson Mark M.A.Thompson@leeds.ac.uk Head of School Thompson Harvey +44(0)113 343 2136 H.M.Thompson@leeds.ac.uk Professor of Computational Fluid Dynamics Thomson Neil +44(0)113 343 7289 N.H.Thomson@leeds.ac.uk Reader Thomson Tamaryn-Lee T.L.Thomson@leeds.ac.uk Electronics Engineer in Medical Dev. Thornton Phillip +44(0)113 343 3832 P.Thornton@leeds.ac.uk Electronics Engineer Thornton Paul +44(0)113 343 2935 P.D.Thornton@leeds.ac.uk Lecturer Thorpe Benjamin +44(0)113 343 2785 B.Thorpe@leeds.ac.uk Teaching Fellow in Statistics Thrush Julie +44(0)113 343 7046 J.Thrush@leeds.ac.uk Education Service Officer Tillotson Martin +44(0)113 343 2295 M.R.Tillotson@leeds.ac.uk Chair in Water Management Titarenko Sofya S.Titarenko@leeds.ac.uk Lecturer Tobias Steven +44(0)113 343 5172 S.M.Tobias@leeds.ac.uk Professor Tobias Steven +44(0)113 343 5172 S.M.Tobias@leeds.ac.uk Professor Tomlin Alison +44(0)113 343 2500 A.S.Tomlin@leeds.ac.uk Professor Tomlinson Laura +44(0)113 343 0667 L.E.Tomlinson@leeds.ac.uk Finance Assistant Tomlinson Gordon +44(0)113 343 2035 G.M.Tomlinson@leeds.ac.uk Education Service Officer Toppaladoddi Srikanth S.Toppaladoddi@leeds.ac.uk Lecturer in Applied Mathematics Torres Sebastian +44(0)113 343 5131 S.D.Torres@leeds.ac.uk Student Education Service Officer (Admissions) Trembath Roy +44(0)113 343 2310 R.Trembath@leeds.ac.uk Technician Trigg Mark +44(0)113 343 2265 M.Trigg@leeds.ac.uk Associate Professor of Water Risk Trowsdale Dan +44(0)113 343 8120 D.B.Trowsdale@leeds.ac.uk Excellence and Innovation Fellowship Tsang Yue-Kin +44(0)113 343 9628 Y.Tsang@leeds.ac.uk Research Fellow Turnbull Rory R.P.Turnbull@leeds.ac.uk Research Fellow Turnbull Bruce +44(0)113 343 7438 W.B.Turnbull@leeds.ac.uk Professor of Biomolecular Chemistry Turner Thomas T.D.Turner@leeds.ac.uk Research Fellow Turner Rodney R.J.Turner1@leeds.ac.uk Professor Turner Gavin +44(0)113 343 2348 G.B.Turner@leeds.ac.uk Senior Administration Assistant Turner Amanda A.Turner5@leeds.ac.uk Professor of Statistics Tutesigensi Apollo +44(0)113 343 4678 A.Tutesigensi@leeds.ac.uk Associate Professor Unterhitzenberger Christine C.Unterhitzenberger@leeds.ac.uk Associate Professor in Project Management Valavanis Alexander +44(0)113 343 3224 A.Valavanis@leeds.ac.uk Associate Professor Valdastri Pietro +44(0)113 343 3706 P.Valdastri@leeds.ac.uk Chair in Robotics & Autonomous Systems Valera Sachin S.J.Valera@leeds.ac.uk Visiting Researcher Van de Sande Marie M.VandeSande@leeds.ac.uk Marie Skodowska-Curie Individual Fellow Van Loo Sven S.VanLoo@leeds.ac.uk Lecturer in Astrophysics Varcoe Ben +44(0)113 343 8290 B.Varcoe@leeds.ac.uk Professor Vaughan Matthew M.T.Vaughan@leeds.ac.uk Research Fellow Velenturf Anne A.Velenturf@leeds.ac.uk Research Impact Fellow in Circular Economy Velis Costas +44(0)113 343 2327 C.Velis@leeds.ac.uk Lecturer Vermeeren Mats M.Vermeeren@leeds.ac.uk DFG Research Fellow Vickers Eleanor E.H.Vickers@leeds.ac.uk Tutorial Assistant Virtanen Seppo S.Virtanen@leeds.ac.uk Lecturer in Statistics Voice Alison +44(0)113 343 6647 A.M.Voice@leeds.ac.uk Senior Lecturer Voss Jochen +44(0)113 343 5125 J.Voss@leeds.ac.uk Lecturer Vuskovic Kristina +44(0)113 343 5443 K.Vuskovic@leeds.ac.uk Professor of Algorithms and Combinatorics Wadud Zia +44(0)113 343 7733 Z.Wadud@leeds.ac.uk Associate Professor Walder Carol +44(0)113 343 6494 C.A.Walder@leeds.ac.uk School Administrator Walker Nicole N.Walker@leeds.ac.uk Administration Support Assistant Walker Philip +44(0)113 343 7585 P.Walker@leeds.ac.uk Senior Teaching Fellow Walkley Mark +44(0)113 343 5684 M.A.Walkley@leeds.ac.uk Lecturer Walko Martin M.Walko@leeds.ac.uk Lecturer Walsh Catherine +44(0)113 343 0958 C.Walsh1@leeds.ac.uk Associate Professor; UKRI Future Leader Fellow Walti Christoph +44(0)113 343 2023 C.Walti@leeds.ac.uk Professor Wanatowski Dariusz D.Wan@leeds.ac.uk Professor of Geomechanics Wang Zheng +44(0)113 343 1077 Z.Wang5@leeds.ac.uk Professor of Intelligent Software Technology Wang Yongxing +44(0)113 343 4874 Y.Wang3@leeds.ac.uk Lecturer Wang Judith +44(0)113 343 3259 J.Y.T.Wang@leeds.ac.uk Associate Professor Wang He +44(0)113 343 5767 H.E.Wang@leeds.ac.uk Associate Professor Wang Chun +44(0)113 343 2198 C.Wang@leeds.ac.uk Research Fellow Wang Lin L.Wang2@leeds.ac.uk Visiting Research Fellow Wang Xue +44(0)113 343 2427 X.Z.Wang@leeds.ac.uk Professor Wang Mi +44(0)113 343 2435 M.Wang@leeds.ac.uk Professor Wang Zhaobin Z.Wang4@leeds.ac.uk Visiting Researcher Ward Keeran K.R.Ward@leeds.ac.uk Lecturer Ward Jonathan +44(0)113 343 5157 J.A.Ward@leeds.ac.uk Lecturer Wareing Christopher C.J.Wareing@leeds.ac.uk Research Fellow Warner Katie +44(0)113 343 8104 K.E.Warner@leeds.ac.uk CPD Course and Events Co-ordinator Warren Nicholas N.Warren@leeds.ac.uk Associate Professor Warren James J.P.Warren@leeds.ac.uk Research Fellow Warriner Stuart +44(0)113 343 6437 S.L.Warriner@leeds.ac.uk Senior Lecturer Watson Alan A.A.Watson@leeds.ac.uk Emeritus Professor Webb Michael +44(0)113 343 6423 M.E.Webb@leeds.ac.uk Associate Professor Webster Clair +44(0)113 343 6149 C.Webster@leeds.ac.uk Deputy Faculty Research Manager Wei Lijun L.J.Wei@leeds.ac.uk Research Fellow Wen Dongsheng +44(0)113 343 1299 D.Wen@leeds.ac.uk Chair in Petroleum Engineering Weston Stuart +44(0)113 343 3819 S.Weston@leeds.ac.uk Technician Westwood Aidan +44(0)113 343 2555 A.V.K.Westwood@leeds.ac.uk Lecturer Wetherill Lee +44(0)113 343 2171 L.Wetherill@leeds.ac.uk Technician Whalley Lisa +44(0)113 343 6594 L.K.Whalley@leeds.ac.uk Senior Research Fellow Whitaker Becky +44(0)113 343 0827 R.J.Whitaker@leeds.ac.uk Education Service Functional Manager Whitefoot Hayley +44(0)113 343 9901 H.Whitefoot@leeds.ac.uk Blended Learning Enhancement Officer Whiteley Alison +44(0)113 343 3220 A.J.Whiteley@leeds.ac.uk Manager, CPD Conference & Events Unit Whitley Antonia +44(0)113 343 2411 A.Whitley@leeds.ac.uk School Administration Officer Widrascu Karl K.Widrascu@leeds.ac.uk Analytical Technician Wiese Tony +44(0)113 343 2187 A.M.Wiese@leeds.ac.uk Lead Technician Wijayathunga Nagitha +44(0)113 343 2125 V.N.Wijayathunga@leeds.ac.uk Senior Research Fellow Wilcox Ruth +44(0)113 343 7980 R.K.Wilcox@leeds.ac.uk Professor Wilkins Terry +44(0)113 343 2570 T.A.Wilkins@leeds.ac.uk Professor Wilkins Simon +44(0)113 343 3039 S.A.Wilkins@leeds.ac.uk R&I Development Manager Wilkinson Adam A.J.Wilkinson@leeds.ac.uk Student Education Service Assistant Manager Willans Charlotte +44(0)113 343 5868 C.E.Willans@leeds.ac.uk Associate Professor and Director of Research and Innovation Williams Alan +44(0)113 343 2507 A.Williams@leeds.ac.uk Research Professor Williams Paul +44(0)113 343 2504 P.T.Williams@leeds.ac.uk Professor Williams Jeanine J.Williams4@leeds.ac.uk Experimental Officer: Chromatography and Analysis Williams Gwenllian G.M.Williams@leeds.ac.uk Postdoctoral research fellow Williams Simon S.P.Williams@leeds.ac.uk Research Assistant Williams Sophie +44(0)113 343 2214 S.D.Williams@leeds.ac.uk Professor in Medical Engineering Wills Harriet +44(0)113 343 2494 H.Wills1@leeds.ac.uk CPD Conference and Events Co-ordinator Wilman Marvin +44(0)113 343 9451 M.Wilman@leeds.ac.uk Technician Wilson Samuel +44(0)113 343 5474 S.S.Wilson@leeds.ac.uk Lecturer of Computing Wilson Andrew +44(0)113 343 1409 A.J.Wilson@leeds.ac.uk Professor Wilson Mark +44(0)113 343 2177 M.Wilson@leeds.ac.uk Associate Professor Wilson Sarah +44(0)113 343 0515 S.Wilson3@leeds.ac.uk Marketing Executive Winyard Thomas +44(0)113 343 9628 T.Winyard@leeds.ac.uk Research Fellow Wood Ann +44(0)113 343 2355 A.R.Wood@leeds.ac.uk Education Service Assistant Wood Phillip +44(0)113 343 2188 P.M.Wood@leeds.ac.uk Laboratory Manager Wood Christopher +44(0)113 343 8335 C.D.Wood@leeds.ac.uk Associate Professor Wood David +44(0)113 343 6192 D.J.Wood@leeds.ac.uk Professor Wood John +44(0)113 343 5106 J.C.Wood@leeds.ac.uk Professor Woodhouse Ed +44(0)113 343 2387 E.Woodhouse@leeds.ac.uk Lead Technician Woodin Sarah S.L.Woodin@leeds.ac.uk Senior Research Fellow Woodward Peter P.K.Woodward@leeds.ac.uk Chair in High Speed Rail Engineering Wright Kathleen +44(0)113 343 1755 K.E.Wright@leeds.ac.uk Project Administrator Wright Megan +44(0)113 343 3196 M.H.Wright@leeds.ac.uk University Academic Fellow Wright Nigel +44(0)113 343 0350 N.G.Wright@leeds.ac.uk Visiting Professor Wu Guizhi G.Z.Wu@leeds.ac.uk Experimental Officer Xia Yan Y.Xia@leeds.ac.uk Research Fellow Xie Shane +44(0)113 343 4896 S.Q.Xie@leeds.ac.uk Chair in Robotics+Autonomous Systems Xu Nan N.Xu@leeds.ac.uk EPSRC Research Fellow Xu Bao Hua +44(0)113 343 2423 B.H.Xu@leeds.ac.uk Lecturer Xu Jie +44(0)113 343 5193 J.Xu@leeds.ac.uk Professor Yagmur Ahmet A.Yagmur@leeds.ac.uk Dr. Yamashita Naoto N.Yamashita@leeds.ac.uk Visiting Research Fellow Yang Junfeng +44(0)113 343 2151 J.Yang@leeds.ac.uk Associate Professor Yang Xuebin +44(0)113 343 6162 X.B.Yang@leeds.ac.uk Associate Professor Yang Renyu +44(0)113 343 5236 R.Yang1@leeds.ac.uk Research Fellow Yang Liuquan L.Q.Yang@leeds.ac.uk Lecturer in Surface Engineering Yenigul Beril B.S.Yenigul@leeds.ac.uk Marie Curie (ESR) Researcher Yildirim Kaygun Emine E.YildirimKaygun@leeds.ac.uk Research Fellow Yu Hai-Sui +44(0)113 343 6703 DVC@leeds.ac.uk Deputy Vice-Chancellor Yuan Jiachen J.Yuan@leeds.ac.uk Senior research associate Yuksel Gamze G.Yuksel@leeds.ac.uk Visiting Researcher Yusuf Muhammad M.Yusuf@leeds.ac.uk Research Fellow Yuval Omer O.Yuval@leeds.ac.uk Research assistant Zaidi Syed S.A.Zaidi@leeds.ac.uk Associate professor Zakaria Fiona F.Zakaria@leeds.ac.uk Research Fellow Zakeri Arezoo +44(0)113 343 5254 A.Zakeri@leeds.ac.uk Research Fellow Zhang Zhiqiang Z.Zhang3@leeds.ac.uk Associate Professor Zhang Zhaopeng Z.Zhang1@leeds.ac.uk Research Fellow Zhang Li X +44(0)113 343 2005 L.X.Zhang@leeds.ac.uk Associate Professor Zhang Xinyou X.Zhang5@leeds.ac.uk SWJTU Staff Zhang Li +44(0)113 343 2020 L.Zhang@leeds.ac.uk Senior Lecturer Zhao Hongyuan H.Zhao@leeds.ac.uk Visiting Researcher Zhou Dejian +44(0)113 343 6230 D.Zhou@leeds.ac.uk Professor of Nanochemistry Zhou Chengxu +44(0)113 343 2832 C.X.Zhou@leeds.ac.uk Lecturer in Mobile Robotics

Read the original:
People | Faculty of Engineering and Physical Sciences - University of Leeds

Stainless steel – Wikipedia

Steel alloy resistant to corrosion

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel's resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.[1]:3

The alloy's properties, such as luster and resistance to corrosion, are useful in many applications. Stainless steel can be rolled into sheets, plates, bars, wire, and tubing. These can be used in cookware, cutlery, surgical instruments, major appliances, vehicles, construction material in large buildings, industrial equipment (e.g., in paper mills, chemical plants, water treatment), and storage tanks and tankers for chemicals and food products.

The biological cleanability of stainless steel is superior to both aluminium and copper, having a biological cleanability comparable to glass.[2] Its cleanability, strength, and corrosion resistance have prompted the use of stainless steel in pharmaceutical and food processing plants.[3]

Different types of stainless steel are labeled with an AISI three-digit number,[4] The ISO 15510 standard lists the chemical compositions of stainless steels of the specifications in existing ISO, ASTM, EN, JIS, and GB standards in a useful interchange table.[5]

Like steel, stainless steels are relatively poor conductors of electricity, with significantly lower electrical conductivities than copper. In particular, the electrical contact resistance (ECR) of stainless steel arises as a result of the dense protective oxide layer and limits its functionality in applications as electrical connectors.[6] Copper alloys and nickel-coated connectors tend to exhibit lower ECR values, and are preferred materials for such applications. Nevertheless, stainless steel connectors are employed in situations where ECR poses a lower design criteria and corrosion resistance is required, for example in high temperatures and oxidizing environments.[7]

As with all other alloys, the melting point of stainless steel is expressed in the form of a range of temperatures, and not a singular temperature.[8] This temperature range goes from 1,400 to 1,530C (2,550 to 2,790F)[9] depending on the specific consistency of the alloy in question.

Martensitic, duplex and ferritic stainless steels are magnetic, while austenitic stainless steel is usually non-magnetic.[10] Ferritic steel owes its magnetism to its body-centered cubic crystal structure, in which iron atoms are arranged in cubes (with one iron atom at each corner) and an additional iron atom in the center. This central iron atom is responsible for ferritic steel's magnetic properties. This arrangement also limits the amount of carbon the steel can absorb to around 0.025%.[11] Grades with low coercive field have been developed for electro-valves used in household appliances and for injection systems in internal combustion engines. Some applications require non-magnetic materials, such as magnetic resonance imaging.[citation needed] Austenitic stainless steels, which are usually non-magnetic, can be made slightly magnetic through work hardening. Sometimes, if austenitic steel is bent or cut, magnetism occurs along the edge of the stainless steel because the crystal structure rearranges itself.[12]

The addition of nitrogen also improves resistance to pitting corrosion and increases mechanical strength.[14] Thus, there are numerous grades of stainless steel with varying chromium and molybdenum contents to suit the environment the alloy must endure.[15] Corrosion resistance can be increased further by the following means:

Galling, sometimes called cold welding, is a form of severe adhesive wear, which can occur when two metal surfaces are in relative motion to each other and under heavy pressure. Austenitic stainless steel fasteners are particularly susceptible to thread galling, though other alloys that self-generate a protective oxide surface film, such as aluminium and titanium, are also susceptible. Under high contact-force sliding, this oxide can be deformed, broken, and removed from parts of the component, exposing the bare reactive metal. When the two surfaces are of the same material, these exposed surfaces can easily fuse. Separation of the two surfaces can result in surface tearing and even complete seizure of metal components or fasteners.[16][17] Galling can be mitigated by the use of dissimilar materials (bronze against stainless steel) or using different stainless steels (martensitic against austenitic). Additionally, threaded joints may be lubricated to provide a film between the two parts and prevent galling. Nitronic 60, made by selective alloying with manganese, silicon, and nitrogen, has demonstrated a reduced tendency to gall.[17]

The invention of stainless steel followed a series of scientific developments, starting in 1798 when chromium was first shown to the French Academy by Louis Vauquelin. In the early 1800s, British scientists James Stoddart, Michael Faraday, and Robert Mallet observed the resistance of chromium-iron alloys ("chromium steels") to oxidizing agents. Robert Bunsen discovered chromium's resistance to strong acids. The corrosion resistance of iron-chromium alloys may have been first recognized in 1821 by Pierre Berthier, who noted their resistance against attack by some acids and suggested their use in cutlery.[19]

In the 1840s, both of Britain's Sheffield steelmakers and then Krupp of Germany were producing chromium steel with the latter employing it for cannons in the 1850s.[20] In 1861, Robert Forester Mushet took out a patent on chromium steel in Britain.[21]

These events led to the first American production of chromium-containing steel by J. Baur of the Chrome Steel Works of Brooklyn for the construction of bridges. A US patent for the product was issued in 1869.[22]:2261[23] This was followed with recognition of the corrosion resistance of chromium alloys by Englishmen John T. Woods and John Clark, who noted ranges of chromium from 530%, with added tungsten and "medium carbon". They pursued the commercial value of the innovation via a British patent for "Weather-Resistant Alloys".[22]:261,11[24][full citation needed]

In the late 1890s, German chemist Hans Goldschmidt developed an aluminothermic (thermite) process for producing carbon-free chromium.[25] Between 1904 and 1911, several researchers, particularly Leon Guillet of France, prepared alloys that would be considered stainless steel today.[25][26]

In 1908, the Essen firm Friedrich Krupp Germaniawerft built the 366-ton sailing yacht Germania featuring a chrome-nickel steel hull, in Germany. In 1911, Philip Monnartz reported on the relationship between chromium content and corrosion resistance.[27] On 17 October 1912, Krupp engineers Benno Strauss and Eduard Maurer patented as Nirosta the austenitic stainless steel[28][29][30][27] known today as 18/8 or AISI Type 304.[31]

Similar developments were taking place in the United States, where Christian Dantsizen of General Electric[31] and Frederick Becket (1875-1942) at Union Carbide were industrializing ferritic stainless steel.[32] In 1912, Elwood Haynes applied for a US patent on a martensitic stainless steel alloy, which was not granted until 1919.[33]

While seeking a corrosion-resistant alloy for gun barrels in 1912, Harry Brearley of the Brown-Firth research laboratory in Sheffield, England, discovered and subsequently industrialized a martensitic stainless steel alloy, today known as AISI Type 420.[31] The discovery was announced two years later in a January 1915 newspaper article in The New York Times.[18]

The metal was later marketed under the "Staybrite" brand by Firth Vickers in England and was used for the new entrance canopy for the Savoy Hotel in London in 1929.[34] Brearley applied for a US patent during 1915 only to find that Haynes had already registered one. Brearley and Haynes pooled their funding and, with a group of investors, formed the American Stainless Steel Corporation, with headquarters in Pittsburgh, Pennsylvania.[22]:360

Brearley initially called his new alloy "rustless steel". The alloy was sold in the US under different brand names like "Allegheny metal" and "Nirosta steel". Even within the metallurgy industry, the name remained unsettled; in 1921, one trade journal called it "unstainable steel".[35] Brearley worked with a local cutlery manufacturer, who gave it the name "stainless steel".[36] As late as 1932, Ford Motor Company continued calling the alloy rustless steel in automobile promotional materials.[37]

In 1929, before the Great Depression, over 25,000 tons of stainless steel were manufactured and sold in the US annually.[38]

Major technological advances in the 1950s and 1960s allowed the production of large tonnages at an affordable cost:

There are five main families, which are primarily classified by their crystalline structure: austenitic, ferritic, martensitic, duplex, and precipitation hardening.

Austenitic stainless steel[43][44] is the largest family of stainless steels, making up about two-thirds of all stainless steel production.[45] They possess an austenitic microstructure, which is a face-centered cubic crystal structure.[46] This microstructure is achieved by alloying steel with sufficient nickel and/or manganese and nitrogen to maintain an austenitic microstructure at all temperatures, ranging from the cryogenic region to the melting point.[46] Thus, austenitic stainless steels are not hardenable by heat treatment since they possess the same microstructure at all temperatures.[46]

Austenitic stainless steels sub-groups, 200 series and 300 series:

Ferritic stainless steels possess a ferrite microstructure like carbon steel, which is a body-centered cubic crystal structure, and contain between 10.5% and 27% chromium with very little or no nickel. This microstructure is present at all temperatures due to the chromium addition, so they are not hardenable by heat treatment. They cannot be strengthened by cold work to the same degree as austenitic stainless steels. They are magnetic. Additions of niobium (Nb), titanium (Ti), and zirconium (Zr) to Type 430 allow good weldability. Due to the near-absence of nickel, they are less expensive than austenitic steels and are present in many products, which include:

Martensitic stainless steels have a body-centered cubic crystal structure, and offer a wide range of properties and are used as stainless engineering steels, stainless tool steels, and creep-resistant steels. They are magnetic, and not as corrosion-resistant as ferritic and austenitic stainless steels due to their low chromium content. They fall into four categories (with some overlap):[53]

Martensitic stainless steels can be heat treated to provide better mechanical properties. The heat treatment typically involves three steps:[55]

Replacing some carbon in martensitic stainless steels by nitrogen is a recent development.[when?] The limited solubility of nitrogen is increased by the pressure electroslag refining (PESR) process, in which melting is carried out under high nitrogen pressure. Steel containing up to 0.4% nitrogen has been achieved, leading to higher hardness and strength and higher corrosion resistance. As PESR is expensive, lower but significant nitrogen contents have been achieved using the standard AOD process.[56][57][58][59][60]

Duplex stainless steels have a mixed microstructure of austenite and ferrite, the ideal ratio being a 50:50 mix, though commercial alloys may have ratios of 40:60. They are characterized by higher chromium (1932%) and molybdenum (up to 5%) and lower nickel contents than austenitic stainless steels. Duplex stainless steels have roughly twice the yield strength of austenitic stainless steel. Their mixed microstructure provides improved resistance to chloride stress corrosion cracking in comparison to austenitic stainless steel Types 304 and 316. Duplex grades are usually divided into three sub-groups based on their corrosion resistance: lean duplex, standard duplex, and super duplex. The properties of duplex stainless steels are achieved with an overall lower alloy content than similar-performing super-austenitic grades, making their use cost-effective for many applications. The pulp and paper industry was one of the first to extensively use duplex stainless steel. Today, the oil and gas industry is the largest user and has pushed for more corrosion resistant grades, leading to the development of super duplex and hyper duplex grades. More recently, the less expensive (and slightly less corrosion-resistant) lean duplex has been developed, chiefly for structural applications in building and construction (concrete reinforcing bars, plates for bridges, coastal works) and in the water industry.

Precipitation hardening stainless steels have corrosion resistance comparable to austenitic varieties, but can be precipitation hardened to even higher strengths than other martensitic grades. There are three types of precipitation hardening stainless steels:[61]

Solution treatment at about 1,040C (1,900F)followed by quenching results in a relatively ductile martensitic structure. Subsequent aging treatment at 475C (887F) precipitates Nb and Cu-rich phases that increase the strength up to above 1000 MPa yield strength. This outstanding strength level is used in high-tech applications such as aerospace (usually after remelting to eliminate non-metallic inclusions, which increases fatigue life). Another major advantage of this steel is that aging, unlike tempering treatments, is carried out at a temperature that can be applied to (nearly) finished parts without distortion and discoloration.

Typical heat treatment involves solution treatment and quenching. At this point, the structure remains austenitic. Martensitic transformation is then obtained either by a cryogenic treatment at 75C (103F) or by severe cold work (over 70% deformation, usually by cold rolling or wire drawing). Aging at 510C (950F) which precipitates the Ni3Al intermetallic phaseis carried out as above on nearly finished parts. Yield stress levels above 1400MPa are then reached.

The structure remains austenitic at all temperatures.

Typical heat treatment involves solution treatment and quenching, followed by aging at 715C (1,319F). Aging forms Ni3Ti precipitates and increases the yield strength to about 650MPa (94ksi) at room temperature. Unlike the above grades, the mechanical properties and creep resistance of this steel remain very good at temperatures up to 700C (1,300F). As a result, A286 is classified as an Fe-based superalloy, used in jet engines, gas turbines, and turbo parts.

There are over 150 grades of stainless steel, of which 15 are most commonly used. There are several systems for grading stainless and other steels, including US SAE steel grades. The Unified Numbering System for Metals and Alloys (UNS) was developed by the ASTM in 1970. The Europeans have developed EN 10088 for the same purpose.[31]

In its early history, stainless steel was sometimes called rustless steel. Both adjectives, stainless and rustless, are duly recognized and accepted as exaggerations: stainless steel is not literally incapable of rusting, but its established name is "stainless steel" nonetheless.

In technical datasets, stainless steel may sometimes be designated as inox (inoxidizable), CRES (corrosion-resistant), or SS or SST (stainless steel). It may also be designated by subclass or grade without further specification, as for example 188, 17-4 PH, 316, 303, or 304.

Unlike carbon steel, stainless steels do not suffer uniform corrosion when exposed to wet environments. Unprotected carbon steel rusts readily when exposed to a combination of air and moisture. The resulting iron oxide surface layer is porous and fragile. In addition, as iron oxide occupies a larger volume than the original steel, this layer expands and tends to flake and fall away, exposing the underlying steel to further attack. In comparison, stainless steels contain sufficient chromium to undergo passivation, spontaneously forming a microscopically thin inert surface film of chromium oxide by reaction with the oxygen in the air and even the small amount of dissolved oxygen in the water. This passive film prevents further corrosion by blocking oxygen diffusion to the steel surface and thus prevents corrosion from spreading into the bulk of the metal.[3] This film is self-repairing, even when scratched or temporarily disturbed by an upset condition in the environment that exceeds the inherent corrosion resistance of that grade.[63][64]

The resistance of this film to corrosion depends upon the chemical composition of the stainless steel, chiefly the chromium content. It is customary to distinguish between four forms of corrosion: uniform, localized (pitting), galvanic, and SCC (stress corrosion cracking). Any of these forms of corrosion can occur when the grade of stainless steel is not suited for the working environment.

The designation "CRES" refers to corrosion-resistant steel.[65]

Uniform corrosion takes place in very aggressive environments, typically where chemicals are produced or heavily used, such as in the pulp and paper industries. The entire surface of the steel is attacked, and the corrosion is expressed as corrosion rate in mm/year (usually less than 0.1mm/year is acceptable for such cases). Corrosion tables provide guidelines.[66]

This is typically the case when stainless steels are exposed to acidic or basic solutions. Whether stainless steel corrodes depends on the kind and concentration of acid or base and the solution temperature. Uniform corrosion is typically easy to avoid because of extensive published corrosion data or easily performed laboratory corrosion testing.

Acidic solutions can be put into two general categories: reducing acids, such as hydrochloric acid and dilute sulfuric acid, and oxidizing acids, such as nitric acid and concentrated sulfuric acid. Increasing chromium and molybdenum content provides increased resistance to reducing acids while increasing chromium and silicon content provides increased resistance to oxidizing acids. Sulfuric acid is one of the most-produced industrial chemicals. At room temperature, Type 304 stainless steel is only resistant to 3% acid, while Type 316 is resistant to 3% acid up to 50C (120F) and 20% acid at room temperature. Thus Type 304 SS is rarely used in contact with sulfuric acid. Type 904L and Alloy 20 are resistant to sulfuric acid at even higher concentrations above room temperature.[67][68] Concentrated sulfuric acid possesses oxidizing characteristics like nitric acid, and thus silicon-bearing stainless steels are also useful.[citation needed] Hydrochloric acid damages any kind of stainless steel and should be avoided.[1]:118[69] All types of stainless steel resist attack from phosphoric acid and nitric acid at room temperature. At high concentrations and elevated temperatures, attack will occur, and higher-alloy stainless steels are required.[70][71] In general, organic acids are less corrosive than mineral acids such as hydrochloric and sulfuric acid. As the molecular weight of organic acids increases, their corrosivity decreases. Formic acid has the lowest molecular weight and is a weak acid. Type 304 can be used with formic acid, though it tends to discolor the solution. Type 316 is commonly used for storing and handling acetic acid, a commercially important organic acid.[72]

Type 304 and Type 316 stainless steels are unaffected by weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures. The same grades exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking.[73] Increasing chromium and nickel contents provide increased resistance.

All grades resist damage from aldehydes and amines, though in the latter case Type 316 is preferable to Type 304; cellulose acetate damages Type 304 unless the temperature is kept low. Fats and fatty acids only affect Type 304 at temperatures above 150C (300F) and Type 316 SS above 260C (500F), while Type 317 SS is unaffected at all temperatures. Type 316L is required for the processing of urea.[1][pageneeded]

Localized corrosion can occur in several ways, e.g. pitting corrosion and crevice corrosion. These localized attacks are most common in the presence of chloride ions. Higher chloride levels require more highly alloyed stainless steels.

Localized corrosion can be difficult to predict because it is dependent on many factors, including:

Pitting corrosion is considered the most common form of localized corrosion. The corrosion resistance of stainless steels to pitting corrosion is often expressed by the PREN, obtained through the formula:

where the terms correspond to the proportion of the contents by mass of chromium, molybdenum, and nitrogen in the steel. For example, if the steel consisted of 15% chromium %Cr would be equal to 15.

The higher the PREN, the higher the pitting corrosion resistance. Thus, increasing chromium, molybdenum, and nitrogen contents provide better resistance to pitting corrosion.

Though the PREN of certain steel may be theoretically sufficient to resist pitting corrosion, crevice corrosion can still occur when the poor design has created confined areas (overlapping plates, washer-plate interfaces, etc.) or when deposits form on the material. In these select areas, the PREN may not be high enough for the service conditions. Good design, fabrication techniques, alloy selection, proper operating conditions based on the concentration of active compounds present in the solution causing corrosion, pH, etc. can prevent such corrosion.[74]

Stress corrosion cracking (SCC) is a sudden cracking and failure of a component without deformation. It may occur when three conditions are met:

The SCC mechanism results from the following sequence of events:

Whereas pitting usually leads to unsightly surfaces and, at worst, to perforation of the stainless sheet, failure by SCC can have severe consequences. It is therefore considered as a special form of corrosion.

As SCC requires several conditions to be met, it can be counteracted with relatively easy measures, including:

Galvanic corrosion[75] (also called "dissimilar-metal corrosion") refers to corrosion damage induced when two dissimilar materials are coupled in a corrosive electrolyte. The most common electrolyte is water, ranging from freshwater to seawater. When a galvanic couple forms, one of the metals in the couple becomes the anode and corrodes faster than it would alone, while the other becomes the cathode and corrodes slower than it would alone. Stainless steel, due to having a more positive electrode potential than for example carbon steel and aluminium, becomes the cathode, accelerating the corrosion of the anodic metal. An example is the corrosion of aluminium rivets fastening stainless steel sheets in contact with water.[76] The relative surface areas of the anode and the cathode are important in determining the rate of corrosion. In the above example, the surface area of the rivets is small compared to that of the stainless steel sheet, resulting in rapid corrosion.[76] However, if stainless steel fasteners are used to assemble aluminium sheets, galvanic corrosion will be much slower because the galvanic current density on the aluminium surface will be many orders of magnitude smaller.[76] A frequent mistake is to assemble stainless steel plates with carbon steel fasteners; whereas using stainless steel to fasten carbon-steel plates is usually acceptable, the reverse is not. Providing electrical insulation between the dissimilar metals, where possible, is effective at preventing this type of corrosion.[76]

At elevated temperatures, all metals react with hot gases. The most common high-temperature gaseous mixture is air, of which oxygen is the most reactive component. To avoid corrosion in air, carbon steel is limited to approximately 480C (900F). Oxidation resistance in stainless steels increases with additions of chromium, silicon, and aluminium. Small additions of cerium and yttrium increase the adhesion of the oxide layer on the surface.[77] The addition of chromium remains the most common method to increase high-temperature corrosion resistance in stainless steels; chromium reacts with oxygen to form a chromium oxide scale, which reduces oxygen diffusion into the material. The minimum 10.5% chromium in stainless steels provides resistance to approximately 700C (1,300F), while 16% chromium provides resistance up to approximately 1,200C (2,200F). Type 304, the most common grade of stainless steel with 18% chromium, is resistant to approximately 870C (1,600F). Other gases, such as sulfur dioxide, hydrogen sulfide, carbon monoxide, chlorine, also attack stainless steel. Resistance to other gases is dependent on the type of gas, the temperature, and the alloying content of the stainless steel.[78][79] With the addition of up to 5% aluminium, ferritic grades Fr-Cr-Al are designed for electrical resistance and oxidation resistance at elevated temperatures. Such alloys include Kanthal, produced in the form of wire or ribbons.[80]

Standard mill finishes can be applied to flat rolled stainless steel directly by the rollers and by mechanical abrasives. Steel is first rolled to size and thickness and then annealed to change the properties of the final material. Any oxidation that forms on the surface (mill scale) is removed by pickling, and a passivation layer is created on the surface. A final finish can then be applied to achieve the desired aesthetic appearance.[81][82]

The following designations are used in the U.S. to describe stainless steel finishes by ASTM A480/A480M-18 (DIN):[83]

A wide range of joining processes are available for stainless steels, though welding is by far the most common.[84][49]

The ease of welding largely depends on the type of stainless steel used. Austenitic stainless steels are the easiest to weld by electric arc, with weld properties similar to those of the base metal (not cold-worked). Martensitic stainless steels can also be welded by electric-arc but, as the heat-affected zone (HAZ) and the fusion zone (FZ) form martensite upon cooling, precautions must be taken to avoid cracking of the weld. Improper welding practices can additionally cause sugaring (oxide scaling) and/or heat tint on the backside of the weld. This can be prevented with the use of back-purging gases, backing plates, and fluxes.[85] Post-weld heat treatment is almost always required while preheating before welding is also necessary in some cases.[49] Electric arc welding of Type 430 ferritic stainless steel results in grain growth in the HAZ, which leads to brittleness. This has largely been overcome with stabilized ferritic grades, where niobium, titanium, and zirconium form precipitates that prevent grain growth.[86][87] Duplex stainless steel welding by electric arc is a common practice but requires careful control of the process parameters. Otherwise, the precipitation of unwanted intermetallic phases occurs, which reduces the toughness of the welds.[88]

Electric arc welding processes include:[84]

MIG, MAG and TIG welding are the most common methods.

Other welding processes include:

Stainless steel may be bonded with adhesives such as silicone, silyl modified polymers, and epoxies. Acrylic and polyurethane adhesives are also used in some situations.[89]

Most of the world's stainless steel production is produced by the following processes:

World stainless steel production figures are published yearly by the International Stainless Steel Forum. Of the EU production figures, Italy, Belgium and Spain were notable, while Canada and Mexico produced none. China, Japan, South Korea, Taiwan, India the US and Indonesia were large producers while Russia reported little production.[45]

European Union

Americas

China

Asia excluding China

Other countries

Breakdown of production by stainless steels families in 2017:

Stainless steel is used in a multitude of fields including architecture, art, chemical engineering, food and beverage manufacture, vehicles, medicine, energy and firearms.

Life cycle cost (LCC) calculations are used to select the design and the materials that will lead to the lowest cost over the whole life of a project, such as a building or a bridge.[90][91]

The formula, in a simple form, is the following:[92][citation needed][93]

where LCC is the overall life cycle cost, AC is the acquisition cost, IC the installation cost, OC the operating and maintenance costs, LP the cost of lost production due to downtime, and RC the replacement materials cost.

In addition, N is the planned life of the project, i the interest rate, and n the year in which a particular OC or LP or RC is taking place. The interest rate (i) is used to convert expenses from different years to their present value (a method widely used by banks and insurance companies) so they can be added and compared fairly. The usage of the sum formula ( {textstyle sum } ) captures the fact that expenses over the lifetime of a project must be cumulated[clarification needed] after they are corrected for interest rate.[citation needed]

Application of LCC in materials selection

Stainless steel used in projects often results in lower LCC values compared to other materials. The higher acquisition cost (AC) of stainless steel components are often offset by improvements in operating and maintenance costs, reduced loss of production (LP) costs, and the higher resale value of stainless steel components.[citation needed]

LCC calculations are usually limited to the project itself. However, there may be other costs that a project stakeholder may wish to consider:[citation needed]

The average carbon footprint of stainless steel (all grades, all countries) is estimated to be 2.90kg of CO2 per kg of stainless steel produced,[94] of which 1.92kg are emissions from raw materials (Cr, Ni, Mo); 0.54kg from electricity and steam, and 0.44kg are direct emissions (i.e., by the stainless steel plant). Note that stainless steel produced in countries that use cleaner sources of electricity (such as France, which uses nuclear energy) will have a lower carbon footprint. Ferritics without Ni will have a lower CO2 footprint than austenitics with 8% Ni or more. Carbon footprint must not be the only sustainability-related factor for deciding the choice of materials:

Stainless steel is 100% recyclable.[95][96][97] An average stainless steel object is composed of about 60% recycled material of which approximately 40% originates from end-of-life products, while the remaining 60% comes from manufacturing processes.[98] What prevents a higher recycling content is the availability of stainless steel scrap, in spite of a very high recycling rate. According to the International Resource Panel's Metal Stocks in Society report, the per capita stock of stainless steel in use in society is 80 to 180kg (180 to 400lb) in more developed countries and 15kg (33lb) in less-developed countries. There is a secondary market that recycles usable scrap for many stainless steel markets. The product is mostly coil, sheet, and blanks. This material is purchased at a less-than-prime price and sold to commercial quality stampers and sheet metal houses. The material may have scratches, pits, and dents but is made to the current specifications.[citation needed]

The stainless steel cycle starts with carbon steel scrap, primary metals, and slag. The next step is the production of hot-rolled and cold-finished steel products in steel mills. Some scrap is produced, which is directly reused in the melting shop. The manufacturing of components is the third step. Some scrap is produced and enters the recycling loop. Assembly of final goods and their use does not generate any material loss. The fourth step is the collection of stainless steel for recycling at the end of life of the goods (such as kitchenware, pulp and paper plants, or automotive parts). This is where it is most difficult to get stainless steel to enter the recycling loop, as shown in the table below:

Stainless steel nanoparticles have been produced in the laboratory.[100][101] These may have applications as additives for high-performance applications. For example, sulfurization, phosphorization, and nitridation treatments to produce nanoscale stainless steel based catalysts could enhance the electrocatalytic performance of stainless steel for water splitting.[102]

There is extensive research indicating some probable increased risk of cancer (particularly lung cancer) from inhaling fumes while welding stainless steel.[103][104][105][106][107][108] Stainless steel welding is suspected of producing carcinogenic fumes from cadmium oxides, nickel, and chromium.[109] According to Cancer Council Australia, "In 2017, all types of welding fumes were classified as a Group 1 carcinogen."[109]

Stainless steel is generally considered to be biologically inert. However, during cooking, small amounts of nickel and chromium leach out of new stainless steel cookware into highly acidic food.[110] Nickel can contribute to cancer risksparticularly lung cancer and nasal cancer.[111][112] However, no connection between stainless steel cookware and cancer has been established.[113]

Read the original:
Stainless steel - Wikipedia

Corticobasal syndrome: a practical guide | Practical Neurology

Case vignette 1 (with video)

A 68-year-old woman had a 2-year history of motor symptoms. Her first symptom had been her left hand not doing what it was told to do when drying the dishes. She also developed difficulties getting her words out. On examination, she had pseudobulbar speech and made dysphasic errors, and there was apraxia and hypometria of saccades, particularly leftward (video 1). She showed ideomotor apraxia and features of alien-limb syndrome in the left arm, and intermittent dystonic posturing of the left arm and leg but minimal limb rigidity. Her cognition was preserved.

Schematic of typical saccade abnormalities in CBS, compared with PD and PSP. In this schematic of eye movement recordings, patients were asked to make a leftward saccade of 20 towards a target as quickly as possible. Y axis is displacement amplitude, the X axis is time. Mild undershoot followed by a small secondary saccade is normal. Patients with PD commonly show mild hypometria (undershooting) requiring two or more corrective saccades to reach target. In CBS the degree of saccadic hypometria is often greater than in PD with the key feature being delayed launching of saccades (saccadic apraxia). In PSP the hallmark is early saccadic slowing (especially vertically) with considerable hypometria developing over time. CBS, corticobasal syndrome; PD, Parkinsons disease; PSP, progressive supranuclear palsy. Figure by Bronstein & Anderson (2021), distributed at https://doi.org/10.6084/m9.figshare.14390951 under an open CC-BY 4.0 license.

We diagnosed corticobasal syndrome referred her to physiotherapy and occupational therapy. An MR scan of brain showed only mild involutional changes consistent with age but no perirolandic atrophy.

Her condition progressed over the next 4years. She lost vertical eye movements and her alien limb became very pronounced. Her speech deteriorated to yes and no, although she could still comprehend. She became more rigid with worsening dystonia particularly of neck extension, and her postural reflexes became impaired. We gave an unsuccessful trial of levodopa and sought speech and language involvement; botulinum injections into the neck extensors gave some benefit. She continued to deteriorate and died 6years from symptom onset.

A 79-year-old woman reported decreased coordination, slowed movement and subtle right arm weakness that appeared to follow a fall. Over the next 9 months, her right arm became increasing difficult to use, causing difficulty with tasks such as doing up a bra and cutting food. Her walking felt more uncertain and she had one significant fall. On examination, there was marked right arm rigidity with a grasp reflex, significant bradykinesia and ideomotor apraxia. Eye movements were normal and there were no pyramidal nor cerebellar signs. Our impression was likely corticobasal syndrome. We arranged physiotherapy and occupational therapy, requested brain imaging and gave an empirical trial of levodopa.

Her right arm deficits progressed despite levodopa, which we later stopped. Her right arm became of little use to her, and she held it in a dystonic posture, without pain, though she still felt some agency over it. Her balance deteriorated further with frequent falls. She developed difficulty with speech, stumbling over longer words but her cognition remained unaffected. MR scan of brain showed left perirolandic atrophy consistent with corticobasal syndrome (figure 4). She remained at home with increasing support from physiotherapy and occupational therapy.

In 1968, Rebeiz et al published three cases detailing the clinical and post mortem pathological findings of a hitherto unrecognised disorder of the central nervous system.1 All three had an asymmetric movement disorder characterised by slowed and awkward voluntary movements with additional involuntary movements. Pathological assessment identified frontoparietal atrophy driven by neuronal loss, gliosis and swelling of cell bodies, resulting in resistance to histological staining methods. While the cortex was primarily involved, the substantia nigra was abnormal in all three, and the dentatorubrothalamic system was abnormal in two. They coined the term corticodentatonigral degeneration with neuronal achromasia. Three decades later Gibb et al reported three further patients with similar clinical and histopathological findings. They adopted the shorter name corticobasal degeneration,2 and the next decade saw many further descriptions of this newly named disorder. The clinical phenotype expanded from primarily a movement disorder to include various cognitive and neurobehavioural deficits35 while the underlying pathology of clinically diagnosed cases also expanded to include Alzheimers disease, progressive supranuclear palsy (PSP), Picks disease and Creutzfeldt-Jakob disease.69 Thus, the etymology has slowly transitioned to corticobasal syndrome as a clinical rather than a pathological diagnosis.10 Table 1 shows the current consensus diagnostic criteria for both the clinically defined corticobasal degeneration11 and the pathologically defined corticobasal syndrome.12 13 Figure 1 shows the common clinical phenotypes of corticobasal degeneration and the common pathologies underlying corticobasal syndrome.

Proposed criteria for corticobasal syndrome (the Cambridge criteria, modified Bak and Hodges)12

Unpicking corticobasal syndrome and corticobasal degeneration. From phenotype to underlying pathophysiology. This is a simplified view and includes only the common phenotypes of corticobasal degeneration and common pathological substrates underlying corticobasal syndrome. CBS, corticobasal syndrome; CBD, corticobasal disease; AD, Alzheimers disease; FTLD-TDP43, frontotemporal lobe degeneration TDP43; PSP, progressive supranuclear palsy; FTD Tau, frontotemporal dementia; FBSS, frontal behavioural-spatial syndrome; PPA, primary progressive aphasia.

Corticobasal degeneration is a pathologically established four-repeat tauopathy.14 Its pathological features are cortical and striatal tau-positive neuronal and glial lesions of both white and grey matter, coupled with focal cortical and substantia nigra neuronal loss.14 Importantly, there is not a 1:1 mapping between corticobasal degeneration and corticobasal syndrome, and corticobasal degeneration pathology is associated with various clinical phenotypes (figure 1). There are four suggested broad clinical phenotypes:

Corticobasal syndrome.

Frontal behavioural-spatial syndrome.

Non-fluent/agrammatic variant of primary progressive aphasia.

PSP syndrome.11

Probable corticobasal degeneration criteria require an insidious onset and gradual progression for at least 1year, age at onset >50 years, no similar family history or known tau mutations, and one of the clinical phenotypes outlined above. Features suggesting Parkinsons disease (characteristic tremor, hallucinations, response to levodopa), or multiple system atrophy (prominent autonomic or cerebellar signs) are exclusions. However, the criteria still lack antemortem specificity to separate pathologically proven corticobasal degeneration from its mimics.15

It is difficult to ascertain the true prevalence and incidence of corticobasal syndrome, given the varied use of the term and its interchangeability in early reviews with corticobasal degeneration. Estimates are therefore at best a guide and even then, remain crude. The estimated prevalence of corticobasal degeneration is 4.97.3 cases per 100000 population.16 The annual incidence calculated from the prevalence and life expectancy would be between 0.5 and 1 per 100000 per year, though this is higher than the rate observed in a population based study.17 The typical age of presentation is 50s70s and average lifespan from diagnosis to death is 7 years. There does not appear to be any sex bias.18

A single pathogenic mutation is unlikely to contribute greatly to the pathogenesis of corticobasal syndrome. However, familial clustering can occur with up to 31% have a family history of parkinsonism or dementia19 The most common monogenic mutations associated with familial corticobasal syndrome are in microtubule-associated protein tau (MAPT) resulting in frontotemporal lobar degeneration (FTLD)-tau pathology strongly resembling corticobasal degeneration,20 although genome-wide association studies have identified other single nucleotide polymorphisms.21 More recently corticobasal syndrome has been associated with FTLD with ubiquitin-immunoreactive inclusions (FTLD)22 or TAR DNA-binding protein 43 (TDP-43) leading to frontal temporal lobe degeneration (FTLD-TDP)23 both of which are most often caused by progranulin mutations24 but not always.25 Pathogenic GGGCC expansion with mutations in C9orf72 (chromosome 9 open reading frame 72) and mutations in LRRK2 (previously limited to Parkinsons disease)26 are also associated with corticobasal syndrome.27 Outside of familial monogenic mutations, a casecontrol study suggests single-nucleotide polymorphisms in the H1 haplotype of the MAPT gene may predispose to sporadic corticobasal syndrome.28

Corticobasal syndrome has an insidious onset and is slowly progressive.12 29 Patients with dramatic presentations and/or rapidly progressive disease courses should be considered mimics (see below).

Extrapyramidal motor features are common with no dramatic or sustained response to levodopa therapy.12 29 Rigidity is the most frequent extrapyramidal motor sign, present in 73%100% of cases, mostly presenting as an asymmetric akineticrigid syndrome.13 29 30 Dystonia is much less common than rigidity and tends to affect a single limb, often the upper and usually early in the disease course.12 13 Other extrapyramidal features such as bradykinesia and postural instability may also occur.12 A tremor can develop but is an action or postural jerky movement that subsides with rest, and is quite unlike a resting Parkinsons disease tremor.12 13 29 It can overlap with another common motor featuremyoclonuswhich occurs in roughly 40% of cases.12 13 29 Electrophysiology studies suggest the myoclonus is cortical or subcortical in origin.3133

The alien limb syndrome comprises involuntary limb movements combined with an altered sense of limb belonging or ownership. It usually involves the hand but may uncommonly occur only in the leg, or both arm and leg, and rarely is bilateral.34 35 A detailed account of the underlying neurobiological processes causing alien limb is beyond this review but proposed mechanisms have been suggested.36 The alien limb is easily confused with other neurological signs (table 2). There are three recognised variants: frontal, callosal (together termed anterior) and posterior (figure 2).

Alien limb differential diagnosis

Classification algorithm of the alien limb syndrome. Modified from Hassan and Josephs. 72 CBS, corticobasal syndrome; CJD, Creutzfeldt-Jakob disease.

The posterior variant is the most often encountered type in corticobasal syndrome and usually affects the non-dominant upper limb, with lesions involving the non-dominant parietal lobe.35 It is characterised by a sense that the affected limb does not belong to the person. There are usually other parietal cortical deficits including sensory hemineglect, and astereognosis. The typical motor features are not as intrusive as in the frontal variant but may take the form of levitation and other non-purposeful actions, abnormal posturing and ataxia.

Corticobasal syndrome is easily the most common cause of an alien limb (two-thirds of cases).35 By the same token the alien limb syndrome develops in about a half of people with corticobasal syndrome.35 37 While the asymmetry of corticobasal syndrome involves the left and right hemispheres equally, alien limb in this condition usually develops in the non-dominant limb, for unclear reasons.36 In patients presenting with alien limb, the timing of onset during the disease may help to suggest the cause; for example, it can be the presenting symptom of Creutzfeldt-Jakob disease but occurs a median of 1year after disease onset in corticobasal syndrome.35 The associated neurology can also help in the differential diagnosis. Thus, mirror movements develop in 40% of corticobasal syndrome patients with the alien limb but are uncommon in other causes, while intermanual conflict is very uncommon in corticobasal syndrome.36 Myoclonus is usual in patients with Creutzfeldt-Jakob disease but common in corticobasal syndrome, and uncommon in other causes of alien limb.35

There are no proven treatments for alien limb syndrome and management approaches are based on anecdotal experience and the type of alien limb. The frontal variant may respond to sensory tricks (eg, wearing a glove), distracting tasks (eg, holding a ball in the hand), verbal cues that enhance voluntary action and cognitivebehavioural therapy for anxiety reduction. For the posterior variant (common in corticobasal syndrome), treatments used have included clonazepam, botulinum toxin injections into the most active proximal muscles, visualisation strategies (eg, putting the affected hand into a mirror box) and spatial recognition tasks, but these approaches are not always well tolerated or maintained and there is scant information on their long-term benefits.38

Limb apraxia is among the most commonly identified signs that suggests cortical dysfunction in the corticobasal syndrome, occurring in 70%80%.3941 Apraxia is defined as a disorder of higher level motor control, manifesting as impaired skilled and learnt motor acts, despite intact primary sensory and motor pathways39 Apraxia generally affects both sides of the body. Because corticobasal syndrome is usually asymmetrical, finding apraxia on the less affected side (as is common) adds weight to the conclusion that abnormality of movements are not simply due to extrapyramidal features such as rigidity and bradykinesia.40

When screening patients for the presence of apraxia, it can help to test different types of complex movementsthought to correspond to different underlying neurobiological processes that can be disrupted by brain pathology.39 These include:

Performing a gesture, miming the use of tools and copying meaningless gestures. Deficits in these movements, usually referred to as ideomotor apraxia, are common in corticobasal syndrome and can be readily assessed in the clinic.

Performing complex, multistep tasks. Deficits in these processes are often referred to as conceptual, or ideational apraxias, capturing the idea that it is loss of knowledge about objects and their associated actions that underlies the patients difficulties. This is harder to screen for in a routine clinic appointment but may be inferred from the history, or from a formal occupational therapy assessment. Ideational apraxia can be extremely disabling for a persons day-to-day functioning.

Performing repetitive distal limb movements such as tapping the thumb with each finger in turn. Deficits such as clumsy or inaccurate movements, are referred to as limb-kinetic apraxiaa somewhat controversial classification that can be difficult to distinguish from the effects of weakness or bradykinesia.

Other sorts of higher order cortical dysfunction are often termed apraxiasfor example, gait apraxia, constructional apraxia, dressing apraxia, orobuccal apraxia and apraxia of speech (to name a few). When present, these point towards cortical dysfunction signs that can provide evidence for the presence of a corticobasal syndrome.

The traditional oculomotor hallmark of clinically diagnosed corticobasal syndrome is saccade apraxia,42 43 which manifests clinically as difficulty and delay in initiating saccades towards a target, usually with the use of an assisting simultaneous or preceding head movement, and in the laboratory as a substantial increase in saccade latency.44 45 Typically, the saccadic apraxia is greatest towards the side with the greatest limb apraxia.42 43 In contrast to PSP, saccade velocities in patients with corticobasal syndrome are normal46 47 (figure 3). Smooth pursuit can also be moderately impaired but not as severely as in patients with PSP. The neuropathological substrate of saccadic apraxia in corticobasal syndrome awaits further clarification but it remains a distinctly useful clinical diagnostic feature.

The typical language disturbance in corticobasal syndrome is non-fluent variant primary progressive aphasia, with slowed, effortful and/or groping (apraxia of speech) speech and grammatical errors being common.48 However, patients can also develop a logopenic aphasia, characterised by prominent difficulty in word retrieval and sentence repetition.48 The latter is commonly associated with underlying Alzheimers disease pathology, while non-fluent variant primary progressive aphasia, including apraxia of speech, may suggest tau pathology. Therefore, aside from providing evidence of cortical involvement, the pattern of aphasia may help to identify the pathology underlying corticobasal syndrome, but further research is required.

Corticobasal syndrome has a range of neuropsychiatric comorbidities. However, the lack of large scale studies means that while we commonly see features such as depression, apathy, anxiety and agitation (among others) in the clinic, we do not have accurate estimates of their prevalence at different stages of corticobasal syndromeor know whether these features associate with particular underlying pathologies.49 A study of 15 patients with what we would now refer to as corticobasal syndrome found particularly high rates of depression and apathy and also an absence of hallucinations.50 This latter point suggests that the presence of visual hallucinations in a patient with parkinsonism and cognitive deficits should raise concerns they may in fact have an alpha-synucleinopathy such as dementia with Lewy bodies.

We advocate for screening all patients presenting with corticobasal syndrome for neuropsychiatric symptoms, particularly as these features have a major impact on quality of life for patients and their families. Screening can be performed formally (eg, using the neuropsychiatric inventory,51 or by questioning both the patient and an informant for presence of mood disturbance (dysphoria, anhedonia, anxiety), behavioural change (apathy, obsessive or compulsive behaviours, agitation, irritability, impulsivity, loss of empathy) and psychotic features (hallucinations, delusions). Education of caregivers about the possibility of emergence of these complications can be helpful.

Brain imaging has three roles in the assessment of patients with corticobasal syndromeruling out mimics/structural causes (see below), providing support for the clinical diagnosis of a corticobasal syndrome, and providing clues to the underlying pathology.33

Corticobasal syndrome is associated with asymmetrical cortical changes in markers of neuronal loss or dysfunction (grey matter atrophy, hypometabolism or hypoperfusion). This particularly affects frontal-parietal regions encompassing premotor, motor and sensory association cortex, and typically develop contralateral to the more affected side of the body33 52 53 (figure 4). Notably, such perirolandic patterns of change do not appear specific to any underlying pathology but instead associate directly with the clinical features of corticobasal syndrome, consistent with the importance of these regions for processing higher order sensory information and translating this into motor actions. Therefore, finding asymmetrical perirolandic atrophy or hypometabolism on clinical imaging supports a clinical diagnosis of corticobasal syndrome, though its absence does not exclude it. This can be particularly helpful early in the disease course, when the differential may include Parkinsons disease or other parkinsonian syndromes.

Example of an MR scan of a brain in a patient with corticobasal syndrome A. Small arrows show moderate focal asymmetric left perirolandic atrophy on T2-weighted imaging.

Striatal dopamine transporter (DAT) density can be imaged and measured using single-photon emission CT or positron-emission tomography (PET). Most, but not all, patients with corticobasal syndrome have a positive DAT scan.54 One follow-up study suggests that in time all such patients will have a positive result.55 For the clinician, the DAT scans limitation is that it does not differentiate corticobasal syndrome from other parkinsonian disorders.

There has been a recent emphasis on developing measures to identify reliably the underlying pathology in corticobasal syndrome.53 Such measures will be increasingly relevant as protein-specific treatments hopefully emerge over the coming years.33 Ultimately their utility will depend on their ability to distinguish between pathologies at individual rather than at group level.

These strategies can be split into techniques that identify the presence of abnormal protein (such as imaging to detect increased concentrations of brain amyloid protein), and techniques that identify patternseither in neuronal loss/metabolism or brain connectivityclosely associated with the underlying pathology. The use of amyloid PET imaging to identify corticobasal syndrome caused by Alzheimers pathology is the clearest example of the former approach. In turn, researchers are now examining clinical and standard imaging correlates of amyloid positive and negative groups to further refine understanding of how corticobasal syndrome may differ between pathologies.56 Given that there is often an associated underlying tauopathy, emerging tau-based PET techniqueswhich are still troubled by some technical issues such as off-target bindingare also generating strong interest for their potential to identify underlying corticobasal degeneration or progressive supranuclear pathology.33 57

Finally, the distribution of neuronal loss or brain hypometabolism in patients with corticobasal syndrome predicts the underlying pathology, at least at a group level. In particular, corticobasal syndrome caused by Alzheimers pathology often has a posterior pattern of hypometabolism, while corticobasal degeneration may show more subcortical hypometabolism, and PSP pathology shows more frontal hypometabolism.52 58 More complicated techniques assessing brain structural (white matter) or functional connectivity are also showing promise for distinguishing between pathologies but are not yet clinically useful.59

In summary, a corticobasal syndrome diagnosis can be supportedbut not refutedby imaging features, while emerging techniques may direct the neurologist to the underlying pathological cause of a patients syndromeinformation that over time will have practical relevance.

There are currently no proven treatments for corticobasal syndrome. Recent advances in the treatment of tauopathies with immunotherapies and gene expression show promise,60 61 but for the moment we emphasise the importance of making a diagnosis that can explain a puzzling array of problems for a patient and their family. It provides a valid explanation for their symptoms and allows a reframing of priorities from obtaining a diagnosis to coping with the problem. Ideally, treatment should be provided within a multidisciplinary setting with expertise provided by a neurologist, physiotherapist, occupational therapist, speech language therapist, psychiatrist and, ultimately, palliative care services.

Although parkinsonism in corticobasal syndrome does not generally respond well to levodopa, most patients will try it as part of their initial assessments (often when the diagnosis is less clear), and it is reasonable to push the dose up towards at least 1000mg/day before classifying a patient as a non-responder.62 In our experience, other dopaminergic therapies (dopamine agonists, monoamine oxidase inhibitors) also have very limited efficacy in treating motor symptoms of corticobasal syndrome, but a dopamine agonist may be worth considering in those with prominent apathy. Options for treating troublesome myoclonus include levetiracetam and clonazepam. Dystonia can be functionally disabling and at times painful. Anticholinergics, benzodiazepines and amantadine provide modest help at best, and adverse effectsespecially cognitive impairment, hallucinations and confusionoften outweigh any benefit, particularly in older patients, while amantadine can also cause insomnia and leg oedema.63 Botulinum toxin injections can help, depending on the dystonic pattern. Particularly when treating upper limb dystonia, the disabling effects of symptoms must be weighed against the potential limb weakness resulting from injectionsbut as with other interventions a pragmatic trial is certainly reasonable.37 Physiotherapy input is also important in optimising mobility following botulinum toxin injections.

Specific options to consider for the alien limb syndrome are summarised above. Management to mitigate the effects of apraxia is best coordinated by an occupational therapist with knowledge of the condition. Speech therapists can teach patients techniques to overcome some of their language deficits and it is worth seeking their input when speech difficulties are a prominent featurethey can also provide patients with practical advice if swallowing difficulties develop. We often refer patients for physiotherapy aimed at strength and balance training as well as gait assessmentthe addition of gait aids can allow some people to maintain relative physical independence. Although there are no proven treatments for cognitive deficits such as memory and attentional impairment in corticobasal syndrome, many clinicians consider trialling cholinesterase inhibitors if there is a strong suggestion from the history (memory impairment), examination (predominate cortical signs) and cognitive assessment (visuospatial or memory deficits) to suggest an underlying Alzheimers disease pathology.

There are several available pharmacological options for neuropsychiatric manifestations.62 Many mild behavioural issues may be better managed non-pharmacologically (caregiver education, environment changes, etc) but undoubtedly medications can help with more severe disruptions. Seeking psychiatric guidance is useful and building a strong relationship with an interested psychiatrist can help patient management and improve job satisfaction. Selective serotonin reuptake inhibitors are useful for treating common problems such as anxiety, depression and obsessive-compulsive disorder. Apathy, or reduced motivated behaviour, is common, debilitating and difficult to treat. Informing caregivers that it is part of the disease process can help. Agents targeting dopaminergic, cholinergic and serotonergic neuromodulatory networks may help apathy in other degenerative disorders, but there is no good evidence to guide use of these treatments in corticobasal syndrome. Finally, some patients will develop marked behavioural disturbances, including irritability/aggression and psychosis. Management can be difficult but can include atypical antipsychotics, for example, quetiapine or clozapine with appropriate blood count monitoring.

Other practical issues to address include driving safety and checking whether driving licensing agencies need to be informed, the importance of updating a persons will, and establishing an enduring power of attorney early in the disease course, as these can be problematic later if significant cognitive impairment develops. Lastly, putting patients in touch with local charities can greatly help patients and families. If specific charities are not available (eg, the PSP association in the UK and curePSP in the USA) exploring Parkinsons and dementia charities is a reasonable first step.

Conditions that may initially be diagnosed as corticobasal syndrome but turn out to be something else tend to be those with subacute or chronic onset, and those that have some, but not all, symptoms and signs resembling true neurodegenerative corticobasal syndrome. Most of these mimics feature alien limb syndrome with or without myoclonus, and/or one of the rapidly progressive dementias, often with aphasia. Thus, many of the non-neurodegenerative causes of the alien limb syndrome may mimic corticobasal syndrome, including stiff-person syndrome,64 Hashimotos encephalitis,65 66 thalamic cavernoma,67 as well as Creutzfeldt-Jakob disease68 and other rapidly progressive dementias.69 Mimics can usually be distinguished from true corticobasal syndrome by the careful neurological examination to identify peripheral (such as areflexia, proprioceptive loss) or central (eg, pyramidal) nervous system signs, combined with appropriate investigations such as MR scan of brain, electroencephalogram, serum antineuronal and other autoantibody assays, which together may indicate an alternative diagnosis. It is critical to identify these mimics as early as possible as many are treatable or have a better prognosis than true corticobasal syndrome. A careful family history is also important, and clinicians should have a low threshold for genetic testing especially in younger patients with atypical features.

The prognosis for a patient diagnosed with corticobasal syndrome depends mainly on the underlying neuropathology (i.e. cause), the difficulty being that that cause is not easily determined during life. Consequently, there is little available information to assist counselling of the patient and family. In a study of 10 Japanese patients with corticobasal syndrome coming to post mortem (three each with corticobasal degeneration, PSP and Alzheimers disease pathology, and one with atypical tauopathy) median survival was 7 years with a range of 415 years. Survival was similar across pathologies.70 An earlier study of 14 patients with pathologically confirmed corticobasal degeneration reported a median survival time after onset of symptoms of 7.9 years with a considerable range of 2.512.5 years. Survival was shorter in those with early and widespread parkinsonism or frontal lobe syndrome.71 In summary, on present knowledge, average survival in corticobasal syndrome is 78 years but with a considerable range of some 315 years.

Corticobasal syndrome is a disorder of movement, cognition and behaviour, caused by several underlying pathologies including corticobasal degeneration. Clinicians should consider the diagnosis in patients presenting with any combination of extrapyramidal features, apraxia or other parietal signs, aphasia and alien limb phenomena. Neuroimaging showing asymmetrical perirolandic cortical changes supports the diagnosis and advanced neuroimaging may give insight into the underlying pathology. We suggest neuropsychological screening in all patients presenting with corticobasal syndrome. Identifying corticobasal syndrome carries some prognostic significance, management implications and in the future if protein-based treatments arisemay direct further investigations as to underlying pathology.

Corticobasal syndrome is a clinical entity with many different underlying pathologies, including corticobasal degeneration.

Corticobasal degeneration is a pathological diagnosis associated with several clinical syndromes, one of which is corticobasal syndrome.

Corticobasal syndrome has a varied presentation: distinguishing clinical features include asymmetric parkinsonism, myoclonus, alien limb, cortical sensory loss, eye and limb apraxia, and imaging may show asymmetric perirolandic atrophy.

Corticobasal syndrome has several important mimics (eg, Creutzfeldt-Jakob disease, Hashimotos encephalitis), some of which are treatable.

Armstrong MJ, Litvan I, Lang AE, et al. Criteria for the diagnosis of corticobasal degeneration. Neurology 2013;80(5):496503. doi: 10.1212/WNL.0b013e31827f0fd1

Mathew R, Bak TH, Hodges JR. Diagnostic criteria for corticobasal syndrome: a comparative study. J Neurol Neurosurg Psych 2012;83(4):40510. doi: 10.1136/jnnp-2011-300875

Pardini M, Huey ED, Spina S, et al. FDG-PET patterns associated with underlying pathology in corticobasal syndrome. Neurology 2019;92(10):e112135. doi: 10.1212/WNL.0000000000007038

Not required.

Read this article:
Corticobasal syndrome: a practical guide | Practical Neurology

Citius Pharmaceuticals Announces Efficacy and Safety Data for its I/ONTAK (E7777) Phase 3 Study for Treatment of Cutaneous T-Cell Lymphoma to be…

Citius Pharmaceuticals Announces Efficacy and Safety Data for its I/ONTAK (E7777) Phase 3 Study for Treatment of Cutaneous T-Cell Lymphoma to be Presented at the 64th American Society of Hematology (ASH) Annual Meeting  PR Newswire

Originally posted here:
Citius Pharmaceuticals Announces Efficacy and Safety Data for its I/ONTAK (E7777) Phase 3 Study for Treatment of Cutaneous T-Cell Lymphoma to be...